Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • 1000 PK "Al Cu" (1)
  • 12 Awg, 10" Solid W GRND Screw (1)
  • 12MM Wide Gray Feed Thru TB 17-4 Awg (1)
  • 16MM Wide Gray Feed Thru TB 15-0awg (1)
  • 2WAY Al Splice Conn 250WIRE Red (1)
  • 2WAY Al Splice Conn 350WIRE BRN (1)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (3)
  • 3M™ Highland™ Wire Connectors (3)
  • 3M™ Performance Plus™ Wire Connectors (8)
  • 3M™ Scotchcode™ Wire Marker Tape Dispenser STD (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (7)
  • 3M™ Scotchcode™ Wire Marker Write-On Dispensers (3)
  • 3M™ Scotchflex™ Cable Tie Base (2)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 562 (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Standard Nylon Cable Ties (4)
  • 6.2MM Disconnect TB 26-8awg (1)
  • 6.2MM Spring Clip TB 28-8awg (1)
  • 8.2MM Ground Block 24-8awg (1)
  • Aluminum Multi Tap Insulated Conn (1)
  • AMT Connector (2)
  • Automatic Tension Splice Connector (2)
  • B-Cap B2 Red, 350 Jar (1)
  • B-Cap B4 Blue Gray, 250 CRTN (1)
  • Butt Connector (1)
  • Butt Splice (6)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Tie Mounting Base (1)
  • CF4/10 Female Connector (1)
  • CF4/10 Male Connector (1)
  • Channel Nut (2)
  • Compression (6)
  • Compression Connector (7)
  • Compression H-Tap Connector (1)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conn, CPRSN 2-Way (1)
  • Connector Block (1)
  • Connector, Compres. 2 Way (1)
  • Copper Connector (3)
  • Copper Inchcinch Crimps (1)
  • Crimp On Wire Connector (2)
  • Crimp Wire Connector (1)
  • Crimp-On Wire Joint (1)
  • Cross Connector (1)
  • Cu Comp Conn C-CRMP 1/0-2/0 1/0-2/0 (1)
  • Cu TP 2WAY Conn Splice STND 1/0 Tan (1)
  • Cu TP 2WAY Conn Splice STND 2-3 PNK (1)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Easy-Twist Winged Red - STD Jar (1)
  • E-Tap Grounding Connector (1)
  • E-Z-Ground Compression Grounding Connector (1)
  • Greenie Grounding 92, 150 Jar (1)
  • Ground Connector (3)
  • Heat Shrink Splice (1)
  • H-STRNGTH Splitblt Conn 750-600 (1)
  • H-Type Compression Connector (9)
  • Insulation Displacement Connector (4)
  • Insulation Piercing Connector (1)
  • Insulation-Tap Connector (9)
  • Irreversible Compression Ground Connector (1)
  • Lay-In Connector (2)
  • Mechanical (54)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (1)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Non-Metallic Cable Connector (2)
  • Piercing Connector (1)
  • Pigtail Hex Screw (1)
  • Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Tap C (2)
  • Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Tap CO (2)
  • Power Terminal Block (2)
  • Pre-Printed Wire Marker Book (2)
  • PT Switch Conn 6 In STR 3 Wires 90 (1)
  • Push-In 10AWG 3-Port, 150 Jar (1)
  • Push-In 10AWG 3-Port, 50 Box (1)
  • Push-In 12AWG 3-Port, 100 Box (1)
  • Push-In Connector (3)
  • Push-in Wire Connector (7)
  • Service Post Connector (14)
  • Service Post, Bronze, 4 Long, 100PK (1)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Splice Connector (2)
  • Splice Kit (3)
  • Splicing Connector (2)
  • Split Bolt Connector (36)
  • Spring Nut (3)
  • SRVC Post/DBL 1/0-2 STR/Sol (1)
  • SRVC Post/Single 4/0-2 STR 4/0-1sol (1)
  • Step Panel Lug (2)800-300 (1)
  • Step Panel Lug (4) 600-2 (1)
  • Step Panel Lug (4)800-300 (1)
  • Submersible Connector (2)
  • Tie Wire (2)
  • Transformer Lug (6) 500-2 (1)
  • TRM QCK Disc VINL22-18AWG-25PK (1)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (11)
  • Twist-On Wire Nut (5)
  • Two-Way Splice Connector (9)
  • WGR Green Ground Cap 250 Box (1)
  • Wing Twist Connector (2)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wingnut 451 Yellow, 500 Jar (1)
  • Wingnut 452 Red, 500 Jar (1)
  • Wingtwist WT41 Tan, 100 Box (1)
  • Wingtwist WT41 Tan, 500 Bag (1)
  • Wingtwist WT51 Yellow, 100 Box (1)
  • Wingtwist WT51 Ylw, 25K Drum (1)
  • Wingtwist WT52 Red, 25K BRL (1)
  • Wire Clip (1)
  • Wire Connector (16)
  • Wire Connector, Ideal, P/T, SZ: 8.000 In Len, Wire SZ: 12 Awg, BR (1)
  • Wire Marker Book (10)
  • Wire Marker Book 0-9 (1)
  • Wire Marker Book 1-45 (1)
  • Wire Marker Book 1X3 Blank (1)
  • Wire Marker Book A-Z, 0-15, +- (1)
  • Wire Marker Book, 1-48 (1)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, 0-9 (1)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (5)
  • Wire Marking Sleeve (1)
  • Wire MKR BK-3X5 Vnyl CLTH L0-9-Q460 (1)
  • Wire MKR BK-3X5 Vnyl CLTH Lmix-Q455 (1)
  • Wire MKR BK-3X5 Vnyl CLTH Lmix-Q460 (1)
  • Wire Twist Connector (6)
  • Wirenut 59B BLK 100PC BX (1)
  • Wire-Twist Conn., Orange, Bag500 (1)
  • Wire-Twist Conn., Red, Bag 250 (1)
  • Wire-Twist Conn., Yellow, Bag500 (1)
  • Show More...

• Brand

  

  • 3M (28)
  • 3M(TM) (1)
  • ABB (2)
  • Blackburn Grounding (11)
  • Blackburn Mechanical (70)
  • Brady® (10)
  • Buchanan (30)
  • BURNDY (119)
  • Burndy LLC (1)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (29)
  • Easy-Twist (13)
  • Eaton (15)
  • EATON CUTLER-HAMMER (3)
  • Engineered Products CO. (1)
  • EZ-Code (10)
  • E-Z-Code Id (1)
  • Gardner Bender (3)
  • Hellermanntyton (3)
  • Highland (5)
  • Ideal (64)
  • Ilsco (2)
  • Ilsco Corporation (3)
  • Klein Tools (1)
  • LEGRAND-PASS & SEYMOUR (1)
  • LH DOTTIE (11)
  • Minnesota Mining (3M) (16)
  • NSi (7)
  • Nsi Industries (95)
  • nVent ERICO (2)
  • PANDUIT (44)
  • Panduit® (4)
  • Pass and Seymour (1)
  • Performance Plus (2)
  • Platinum Tools (6)
  • Polaris (173)
  • Scotchcast (1)
  • ScotchCode (5)
  • Scotchlok (23)
  • Scotchlok[TM] (1)
  • Selecta Products (1)
  • Sta-Kon (9)
  • T&B Elec Suppl (2)
  • Thomas & Betts (1)
  • Thomas&Betts-Abb Ins Prod (1)
  • Tork(R) (1)
  • UNISTRUT (1)
  • Unistrut Corp. (1)
  • WAGO CORPORATION (2)
  • Show More...

• Material

  

  • Aluminum (85)
  • Brass (2)
  • Brass and Nickel Plated (1)
  • Brass-Alloy (1)
  • Bronze (1)
  • Bronze Alloy (16)
  • Bronze Alloy, Leaded (11)
  • Bronze, Leaded, Commercial (8)
  • CASE HARDENED ASTM A576, ASTM A570 1015, 45 MILD STEEL (2)
  • Cold Rolled High Carbon Steel (1)
  • Copper (126)
  • COPPER ALLOY (15)
  • Copper Alloy, Cast (5)
  • EPDM RUBBER (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Flame-retardant Polypropelene (53)
  • Flame-retardant polypropelene shell (10)
  • Glass Filled Nylon (1)
  • Heat-shrink Polyolefin (9)
  • High Conductivity Copper (1)
  • HIGH CONDUCTIVITY WROUGHT COPPER (1)
  • High copper content hard drawn rod (1)
  • Natural Nylon 6/6 (1)
  • NICKEL PLATED STEEL (1)
  • Nylon (4)
  • Plastic (2)
  • Plastic-Impregnated Cloth (7)
  • Plastisol (1)
  • Polycarbonate (3)
  • Polyester (1)
  • Polypropylene (3)
  • Porcelain (2)
  • Steel (19)
  • Thermoplastic (25)
  • THERMOPLASTIC POLYESTER (1)
  • TIN PLATED ALUMINUM (1)
  • Tin-Plated Aluminum (1)
  • Tin-Plated Copper (7)
  • Vinyl (9)
  • Vinyl Cloth (10)
  • Vinyl Coated White Cloth (1)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (3)
  • Show More...

• Sub Brand

  

  • 3M(R) (6)
  • 3M(TM) (5)
  • Aluminum Compression (1)
  • B-Cap(R) (8)
  • Blackburn (60)
  • Burndy (11)
  • CADDY (1)
  • Color-Keyed (14)
  • Easy Twist (2)
  • Easy-Splice(TM) (3)
  • Easy-Twist(TM) (21)
  • ERICO (1)
  • E-Z-CODE ID (4)
  • Greenie(R) (2)
  • Highland(TM) (4)
  • Ideal (4)
  • In-Sure(R) (7)
  • Klippon(R) (1)
  • NSI (26)
  • Panduit Corp (2)
  • Polaris Black (15)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Scotchlok(TM) (3)
  • Split Bolts (10)
  • Sta-Kon (7)
  • Structuredground (3)
  • Twister(R) (7)
  • Type GCE (1)
  • Type Sbc (8)
  • Type SBCT (1)
  • Type SCSS (1)
  • Wing-Nut(R) (7)
  • WingTwist(TM) (2)
  • Wire-Nut(R) (6)
  • WireTwist(TM) (6)
  • Show More...

• Color

  

  • Aluminum (13)
  • Black (105)
  • Black Print on White (1)
  • Blue (31)
  • Blue/Gray (2)
  • Brown (12)
  • Clear (14)
  • Colorless (2)
  • Copper (22)
  • Gold (1)
  • Gray (28)
  • Gray 0 (2)
  • Green (17)
  • GREEN/YELLOW (3)
  • Grey (1)
  • Metallic (17)
  • OLIVE (3)
  • Orange (13)
  • Pink (10)
  • Purple (11)
  • Red (37)
  • Red/Tan (3)
  • RUBY (3)
  • Silver (1)
  • Steel (2)
  • Tan (10)
  • Tin Plated Copper (12)
  • White (17)
  • Yellow (32)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (2)
  • #10 AWG (Stranded and Solid) (1)
  • #12 AWG (3)
  • #14 AWG (22)
  • #14 AWG (Solid) (1)
  • #14 AWG (Stranded) (4)
  • #16 AWG (2)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (2)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (7)
  • #4 AWG (10)
  • #4 AWG (Stranded) (3)
  • #6 AWG (26)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Run and Tap1);16 sq.mm (Run and Tap1);#14 AWG (Tap2 and Tap3);2.5 sq.mm (Tap2 and Tap3) (1)
  • #6 AWG (Stranded Main);#6 AWG (Stranded Tap);#8 AWG (Stranded Main) (1)
  • #6 AWG (Stranded) (12)
  • #8 AWG (3)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #14 AWG (5)
  • (2) #16 AWG (2)
  • (2) #18 AWG (11)
  • (2) #20 AWG (2)
  • (2) #22 AWG (3)
  • (3) #12 AWG (1)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (3)
  • 0.08 mm^2;28 AWG (2)
  • 250 kcmil (Main);150 m2 (Main);70 m2 (Tap);1/0 AWG (Stranded-Tap) (1)
  • 250 MCM (4)
  • 4/0 AWG (1)
  • 6/1 AWG (ASCR);2/0 AWG (AAAC);2/0 AWG (AAC) (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (Stranded) (1)
  • #10 AWG (2)
  • #10 AWG (Solid);#2 AWG (Stranded) (2)
  • #12 AWG (3)
  • #14 AWG (2)
  • #18 AWG (2)
  • #2 AWG (5)
  • #2 AWG (Run and Tap1);25 sq.mm (Run and Tap1);#8 AWG (Tap2 and Tap3);6 sq.mm (Tap2 and Tap3) (1)
  • #2 AWG (Stranded) (5)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (8)
  • #4 AWG (Stranded Main);#4 AWG (Stranded Main) (1)
  • #4 AWG (Stranded) (3)
  • #6 AWG (6)
  • #6 AWG (Solid);#4 AWG (Stranded) (1)
  • #6 AWG (Stranded) (5)
  • #8 AWG (6)
  • #8 AWG (Stranded) (2)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #14 AWG (2)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (6)
  • (3) #16 AWG (4)
  • (4) #10 AWG (1)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (10)
  • 1/0 AWG (Stranded) (4)
  • 12 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (6)
  • 2/0 AWG (Stranded) (2)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 2/0 to 4/0 AWG (Solid);1/0 AWG to 250 kcmil (Stranded) (1)
  • 250 kcmil (6)
  • 250 MCM (9)
  • 3/0 AWG (7)
  • 300 kcmil (1)
  • 300 MCM (1)
  • 350 kcmil (5)
  • 350 MCM (5)
  • 4/0 AWG (2)
  • 500 kcmil (1)
  • 500 kcmil (Main);240 m2 (Main);120 m2 (Tap);250 kcmil (Tap) (1)
  • 500 MCM (7)
  • 600 kcmil (2)
  • 600 MCM (2)
  • 750 MCM (2)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:#3, #4, #6 AWG (ACSR), #2, #3, #4, #6 AWG (Stranded), #1, #2, #3, #4 AWG (Solid);Standard Conductor-Tap A:#8, #10, #12, #14 AWG (Stranded), #8, #10, #12, #14 AWG (Solid) (1)
  • Standard Conductor-Main:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2, #3, #4 (ASCR), 2/0, 1/0, #1, #2, #3 (Stranded), #1, #2 (Solid);Standard Conductor-Tap A:#8, #10 (Stranded), #6, #8, #10 (Solid);Standard Conductor-Tap B:#12, #14 (Stranded), #12, #14 (Solid) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Length

  

  • 0.56 INCH (1)
  • 0.99 in (1)
  • 1 (2)
  • 1.06 (2)
  • 1.25 (1)
  • 1.32 (1)
  • 1.37 in (4)
  • 1.38 (2)
  • 1.38;34.9 mm (2)
  • 1.5 (1)
  • 1.85 (4)
  • 1/2 in (1)
  • 1-1/2 in (4)
  • 2.37 (2)
  • 2.390 in (1)
  • 3 (4)
  • 3/4 in (1)
  • 30 (1)
  • 4 (4)
  • 400 (2)
  • 5-1/2 in (4)
  • 6 INCH (1)
  • 6.5 (1)
  • 8 (1)
  • Show More...

• Background Color

  

  • NSI (3)
  • White (4)
  • Show More...

• Finish

  

  • Aluminum (11)
  • blank (5)
  • COPPER (27)
  • Electro -Tin Plated (3)
  • EPDM Rubber Insulated (8)
  • Galvanized (1)
  • Matte (10)
  • Nickel (1)
  • NYLON (2)
  • Painted (1)
  • Plastisol (2)
  • Plastisol Insulated (78)
  • Polycarbonate (3)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (29)
  • Tin Plated (67)
  • Tin Plated Bronze (18)
  • Tin Plated Copper (9)
  • Tinned (25)
  • Tin-Plated (22)
  • Uncoated (3)
  • Zinc Plated (15)
  • Show More...

• Legend Color

  

  • Black (5)
  • Non-Smear Black (11)
  • White (9)
  • Show More...

• Width

  

  • 0.22 in (4)
  • 0.22 in;5.6 mm (2)
  • 0.63 (2)
  • 1 (7)
  • 1.188 in (1)
  • 1.75 (3)
  • 1/4 in (4)
  • 2 (2)
  • 3 in (4)
  • Show More...

• Insulation Material

  

  • Copper (1)
  • EPDM Rubber (2)
  • Flame Retardant Polycarbonate (3)
  • Nylon (1)
  • Plastisol (32)
  • Polypropylene (1)
  • PVC (2)
  • Thermoplastic (17)
  • Vinyl (9)
  • Wemid (1)
  • Show More...

• Conductor Material

  

  • Aluminum (19)
  • Aluminum;Copper (36)
  • Bronze (1)
  • Copper (114)
  • Copper;Aluminum (32)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • High Copper Alloy (6)
  • Steel (2)
  • Tin-Plated Copper (1)
  • Show More...

• Insulation Color

  

  • Black (32)
  • Black (Die Color) (1)
  • Blue (14)
  • Blue (Code) (2)
  • Blue (Die Color) (2)
  • Blue/Gray (2)
  • Brown (1)
  • Brown (Code) (1)
  • Brown (Die Color) (2)
  • Gray (14)
  • Gray (Code) (1)
  • Gray (Die Color) (1)
  • Green (5)
  • Green (Code) (1)
  • Green (Die Color) (1)
  • Light Blue (1)
  • Metallic Silver (2)
  • Olive (Code) (1)
  • Orange (8)
  • Orange/Blue (2)
  • Orange;Red (1)
  • Pink (1)
  • Pink (Die Color) (1)
  • Purple (6)
  • Purple (Die Color) (1)
  • Red (20)
  • Red (Die Color) (2)
  • Red/Yellow (3)
  • Silver (1)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • White (1)
  • White (Code) (1)
  • Yellow (19)
  • Yellow;Gray (1)
  • Show More...

• Legend

  

  • (Blank) (3)
  • 0 - 45 (1)
  • 0 - 9, t1, t2, t3, l1, l2, l3 (2)
  • 0 thru 9 (1)
  • 0-9 (3)
  • 1 thru 45 (1)
  • 1 x 3 Blank (1 x 1 Write on Area) (1)
  • 1-45 (3)
  • 46 - 90 (1)
  • 46-90 (2)
  • A-Z, 0-15, +, , / (1)
  • A-Z, 0-15, +, -, / (1)
  • Show More...

• Thickness

  

  • 0.02 (2)
  • 0.025 (6)
  • 0.04 (2)
  • 0.04 INCH (1)
  • 1/4 in (2)
  • 10 mil;0.25 mm (4)
  • 3/8 in (1)
  • Show More...

• Diameter

  

  • 0.187 in Diameter as Supplied (4)
  • 0.25 in Diameter as Supplied (3)
  • 0.38 (2)
  • 1/2 in (1)
  • 1/4 (2)
  • 1/8 (2)
  • 2.390 x 1.188 x 1.375 in (1)
  • 3/16 (3)
  • 3/8 in (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (4)
  • 120/277 (2)
  • 300 (7)
  • 300 V (10)
  • 35 kV (17)
  • 600 (74)
  • 600 V (257)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (3)
  • 600 V ac (4)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (11)
  • 600 Volt (1)
  • 600V (3)
  • IEC 800V, EN 700V, UL 600V (3)
  • Show More...

• Number Of Conductors

  

  • 1 (44)
  • 10 (2)
  • 12 (2)
  • 2 (107)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 4 (1)
  • 2 to 6 (7)
  • 3 (26)
  • 4 (16)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Number Of Pieces

  

  • 20 (2)
  • 50 (2)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • All Aluminum Applications (2)
  • Aluminum/Copper Code Conductor (3)
  • Conductor to Conductor;Conductor to Rebar;Conductor to Ground Rod Applications (1)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (17)
  • Copper Cables;Aluminum Cables (6)
  • Copper Code Conductors (8)
  • Copper Conductor (11)
  • Copper or Aluminum Conductors (2)
  • Copper;Tin Plated Copper Conductor (1)
  • Direct Burial (1)
  • Direct Burial Applications in Earth or Concrete (2)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Ground;Concrete (1)
  • Grounding two Copper Code Conductors to Steel Structures;Busbars;Transformers (3)
  • Hydraulic Tool (9)
  • Overhead Tension Connection (2)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Stranded Copper Conductors (1)
  • Tapping Copper Conductors to Unbroken Main Copper Conductors (1)
  • Terminate;Splice (2)
  • Terminate;Splice;Tap Power Connector (1)
  • Terminate;Splice;Tap Power Connectors (9)
  • Wire Termination (20)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - 1/4 Mounting Hole (1)
  • # 1 AWG (STR) - CU Splice (2)
  • # 2 AWG (STR) - 1/4 Mounting Hole (1)
  • # 2 AWG (STR) - ALCU Splice (1)
  • # 3 AWG (STR) - CU Splice (1)
  • # 4 AWG (STR) - 1/4 Mounting Hole (1)
  • # 4 AWG (STR) - 3/8 Mounting Hole (1)
  • # 6 AWG (STR) - CU Splice (1)
  • # 8 AWG (STR) - # 10 Mounting Hole (1)
  • # 8 AWG (STR) - CU Splice (2)
  • (10) 500 MCM-4 AWG - Dual Rated (1)
  • (12) 500 MCM-4 AWG - Dual Rated (1)
  • (2) 1/0-14 AWG - Dual Rated (1)
  • (2) 1/0-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 3/0-6 AWG - Dual Rated (1)
  • (2) 3/0-6 AWG - Dual Rated - Offset Ports (1)
  • (2) 3/0-6 AWG - Dual Rated - Offset Ports - 1 Pcs Per Pack (1)
  • (2) 350 MCM-6 AWG - Dual Rated (1)
  • (2) 4-14 AWG - Dual Rated (1)
  • (2) 4-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 600 MCM-6 AWG - Dual Rated (1)
  • (2) 750-250 MCM - Dual Rated (2)
  • (3) 1/0-14 AWG - Dual Rated (1)
  • (3) 250 MCM-6 AWG - Dual Rated (1)
  • (3) 250 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (3) 3/0-6 AWG - Dual Rated (1)
  • (3) 350 MCM-12 AWG - Dual Rated (1)
  • (3) 350 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (3) 4-14 AWG - Dual Rated (1)
  • (3) 500 MCM-4 AWG - Dual Rated (1)
  • (3) 600 MCM-6 AWG - Dual Rated (1)
  • (3) 750-250 MCM - Dual Rated (1)
  • (4) 1/0-14 AWG - Dual Rated (1)
  • (4) 1-10 AWG Class B,C,D - (4) 2-10 AWG Class K,M,I (1)
  • (4) 250 MCM-6 AWG - Dual Rated (1)
  • (4) 3/0-4 AWG Class B,C,D - (4) 2/0-2 AWG Class K,M,I (1)
  • (4) 3/0-6 AWG - Dual Rated (1)
  • (4) 350 MCM-12 AWG - Dual Rated (1)
  • (4) 4-14 AWG - Dual Rated (1)
  • (4) 600 MCM-6 AWG - Dual Rated (1)
  • (4) 6-14 AWG Class B,C,D - (4) 6-14 AWG Class K,M,I (1)
  • (5) 3/0-6 AWG - Dual Rated (1)
  • (5) 350 MCM-6 AWG - Dual Rated (1)
  • (5) 600 MCM-6 AWG - Dual Rated (1)
  • (6) 3/0-6 AWG - Dual Rated (1)
  • (6) 350 MCM-12 AWG - Dual Rated (1)
  • (6) 350 MCM-6 AWG - Dual Rated (1)
  • (6) 4-14 AWG - Dual Rated (1)
  • (6) 500 MCM-4 AWG - Dual Rated - With Mounting Holes (1)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • (8) 350 MCM-6 AWG - Dual Rated (1)
  • (8) 500 MCM-4 AWG - Dual Rated (1)
  • 1,000V Maximum In Fixtures And Signs;Better Grip And More Leverage For Faster Connections With Less Effort;Comfortable Swept Wings Designed To Help Reduce Hand Fatigue;Comply With Federal Specification W-S-610E;Expanding Square-Wire Spring Provides A Secure Connection Every Time;Features: The Widest Red/Tan Wire Range In The Industry;Min. 2 #18 To Max. 4 #10;Model Number: 344;Suregrip Overmolding Provides Better Grip For Improved Leverage And More Torque;Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 D (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT51;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT52;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (1)
  • 1/0 AWG (STR) - ALCU Splice (1)
  • 1/0 AWG (STR) - CU Splice (2)
  • 1/0 SOL-250 MCM - 6 Pack (1)
  • 1/0-14 AWG - Dual Rated (1)
  • 10 Replacement Sleeves Per Bag (3)
  • 10 SOL-2 STR - 12 Pack (1)
  • 2 SOL-2 STR - 6 Pack (1)
  • 2 SOL-3/0 STR - 10 Pack (1)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 2/0 AWG (STR) - 3/8 Mounting Hole (1)
  • 2/0 AWG (STR) - ALCU Splice (1)
  • 2/0 AWG (STR) - CU Splice (1)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - CU Splice (2)
  • 250 MCM-6 AWG - Dual Rated (1)
  • 250 MCM-6 AWG - Dual Rated - 20 Pack (1)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (1)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 3/0 AWG (STR) - 3/8 Mounting Hole (1)
  • 3/0 AWG (STR) - CU Splice (2)
  • 3/0 SOL-4/0 STR - 3 Pack (1)
  • 3/0 STR-350 MCM - 4 Pack (1)
  • 3/0 STR-500 MCM - 3 Pack (1)
  • 3/0-6 AWG - Dual Rated - 20 Pack (1)
  • 300 MCM (STR) - 1/2 Mounting Hole - 1 3/4 Hole Spacing (1)
  • 300 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 350 MCM (STR) - 1/2 Mounting Hole (2)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - CU Splice (1)
  • 350 MCM-6 AWG - Dual Rated (1)
  • 4 SOL-1/0 STR - 12 Pack (1)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 4/0 AWG (STR) - CU Splice (2)
  • 4/0 STR-350 MCM - 4 Pack (1)
  • 4/0-8 AWG (1)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (2)
  • 500 MCM (STR) - CU Splice (2)
  • 6 SOL-1/0 STR - 12 Pack (1)
  • 6 SOL-1/0 STR - 20 Pack (1)
  • 6 SOL-2 SOL - 50 Pack (1)
  • 6 STR-2/0 SOL - 15 Pack (1)
  • 600 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (1)
  • 600 MCM (STR) - 350 CU Pin Size (1)
  • 750 MCM (STR) - 1/2 Mounting Hole - 1 3/4 Hole Spacing (1)
  • A Groove-2/0 1/0 (ACSR)-3/0 2/0 (STR)-4/0 3/0 (SOL) - B Groove-2 3 4 6 (ACSR)-1 2 3 4 6 (STR)-1 2 3 4 6(SOL) (1)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Abrasion Resistant;Oil Resistant (2)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Barrel Color Coded with Die Set Index Number (1)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • BRUSH,ASSY,CABLE,CONDUCTOR, (1)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (3)
  • Color-Coded and Marked with Panduit Die Index Numbers for Proper Crimp Die Selection (1)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Compact Design (3)
  • Connecting Conductors to Various Sizes of Tapped Hole;Suitable for Direct Burial in Earth or Concrete (3)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (1)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (6)
  • Convenient Pocket-Size Booklets;Plastic-Impregnated Cloth Construction for Long-Lasting Durability;Resists Abrasion, Moisture, Dirt and Oil;Perforated 1-1/2 in Markers can be Separated into Half-Length Sizes;Self-Sticking on Wire and Cable;For Above Ground;Below Ground (2)
  • Copper Lay-In Lug Direct Burial - 4-14 AWG (1)
  • Corrosion Resistant (3)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Easy Installation;No Special Tools Required (20)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (1)
  • Efficient Design Requires Less Crimping Force;Full Length Tab Makes Installation Easy;Installs with Standard Compression Tools and Dies. Rus Accepted (1)
  • Electro-Tin Plated for Low Contact Resistance (1)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Exceptional Wire-Range Capacity Three Models Handle Wire Combinations From as Small as 22 AWG to as Large as 6 AWG (4)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • E-Z-Ground&reg, connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • E-Z-Ground&Reg;Connectors are Designed for Direct Burial and Offer a Safe, Efficient Alternative to Exothermic Welding Products (1)
  • E-Z-Ground® connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (2)
  • Features: 16 1/2 Gauge, 400 FT (3-1/2#), Black Annealed or Galvanized (2)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 10 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 150 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (1)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: Mushroom Head Provides a Large Bearing Surface (7)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 33 (1)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Range-Taking Connector: Lowers Inventory Requirements, Compact Size: Easy To Tape And Insulate Connection, Manufactured From High Conductivity Wrought Copper: Provides Low Resistance And Excellent Electrical Conductivity, Economical: Provides Low Installed Cost, 8A - Use CRIMPITS Accommodating 6 Stranded Copper, 6A - Use CRIMPITS Accommodating 4 Stranded Copper, 4A - Use CRIMPITS Accommodating 2 Stranded Copper, 2A - Use CRIMPITS Accommodating 1/0 And 2/0 Copper, Use PUADP-1 Adapter When Using U (2)
  • Features: Self-Sticking On Wire And Cable; Perforated 1/4 IN X 1-1/2 IN Markers; For Applications Above Or Below Ground; Resists Abrasion, Moisture, Dirt And Oil; Non-Smear Black Legend Ensures High Visibility; 10 Pages Per Booklet; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Tin-Plated Brass Construction For Corrosion Resistance; Brazed Or Butted Seams Prevent Splitting; Funnel Entry Insulators; Beveled Barrel Openings Provide Easy Wire Entry; Clearly Marked Wire And Stud Ranges; Color-Coded Insulation; Tab Size: 0.110 IN X 020 IN; Temperature Rating: 75 DEG C (1)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: Ultra-Flexible 8 IN Lead Allows For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection; Brass-Alloy Terminals With Locking Tabs For Fast, Efficient Device Connection; Includes: #10 Fork And Stripped End (1)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Fixed;Square-Wire Spring Creates its Own Threads Maintains a Secure Positive Grip That Will Not Relax Over Time (6)
  • Flame Retardant (10)
  • For aluminum and copper concentric conductors and compact code aluminum strandings (12)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications (insulated conductor only). Performs as splice or tab for non-tension applications up to 600 volts, depending on size of connector (3)
  • For Simplified Splicing Of UF Cable Designed With Heavy Wall Heat Shrink With Sealant (1)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (3)
  • HANGER CLIP,ELECTRICAL DROP WIRE SUPPORT (1)
  • Heat Shrink (8)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • High Strength Solderless Service Connector (7)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Installs with standard wrenches (4)
  • Kup-L-Tap(R) Insulation Piercing Connector;Compact Design;Removable End Tabs;Dual Rated for Copper and Aluminum Conductor (1)
  • Large brass contacts, polycarbonate connector housing (2)
  • Large Print (1)
  • Long Barrel;High Conductivity (2)
  • Made from Annealed High Conductivity Copper, Tin Plated (1)
  • Made from high strength copper alloy to resist corrosion and provide premium electrical and mechanical performance (1)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (3)
  • Marked with Die Index and Color Coded (2)
  • Material Flame Retardant Polypropylene (3)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • Offset 2/0-14 AWG - Dual Rated (1)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Pre-printed (9)
  • Provides Sealed Splice For Underground, Buried, And Overhead Applications (1)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • Robust spring design for high performance holding power (6)
  • Self-Sticking on Wire and Cable;For applications above or below ground;Resists Abrasion, Moisture, Dirt and Oil;Non-smear Black Legend Ensures High Visibility;For Above Ground;Below Ground (2)
  • Specially Designed Contour Wings Provide a Secure Grip for Extra Levarage (7)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (5)
  • Standard Barrel;High Conductivity (2)
  • Standard Grey Wire Connector - 100 Pcs Carton (1)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • The GP Suitable for Direct Burial in the Ground or Concrete, one Wrench Installation (1)
  • Thickness 1/4 In, Weight 11.6 Lb per 100 (2)
  • Thickness 1/4 In, Weight 6.7 Lb per 100 (1)
  • Thickness 3/8 In, Weight 9.3 Lb per 100 (2)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (15)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Winged Blue Wire Connector - 50 Pcs Carton (1)
  • Winged Grey Wire Connector - 100 Pcs Bag (1)
  • Winged Yellow Wire Connector - 100 Pcs Jar (1)
  • Without Spring, Thickness 1/2 In, Weight 11.6 Lb per 100 (1)
  • Without Spring, Thickness 3/8 In, Weight 9.3 Lb per 100 (1)
  • Show More...

• Weight

  

  • 0.002 lb (1)
  • 0.0033 lb (1)
  • 0.0034 lb (1)
  • 0.004 lb (3)
  • 0.008 lb (1)
  • 0.01 lb (32)
  • 0.01 lb/EA (4)
  • 0.02 lb (3)
  • 0.02 lb/EA (11)
  • 0.03 lb (1)
  • 0.03 lb/EA (10)
  • 0.04 lb/EA (5)
  • 0.05 lb/EA (3)
  • 0.052 lb/EA (1)
  • 0.06 lb/EA (9)
  • 0.07 lb (1)
  • 0.07 lb/EA (3)
  • 0.08 lb (1)
  • 0.08 lb/EA (9)
  • 0.085 lb/EA (1)
  • 0.09 lb (1)
  • 0.09 lb/EA (10)
  • 0.1 lb (1)
  • 0.1 lb/EA (4)
  • 0.11 lb (1)
  • 0.11 lb/EA (2)
  • 0.12 lb (1)
  • 0.12 lb/EA (5)
  • 0.13 lb/EA (10)
  • 0.14 lb/EA (4)
  • 0.15 lb (2)
  • 0.15 lb/EA (4)
  • 0.16 lb/EA (3)
  • 0.17 lb (1)
  • 0.17 lb/EA (5)
  • 0.18 lb (1)
  • 0.19 lb/EA (6)
  • 0.2 lb (1)
  • 0.2 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.22 lb (1)
  • 0.22 lb/EA (2)
  • 0.24 lb/EA (1)
  • 0.25 lb/EA (3)
  • 0.26 lb (1)
  • 0.26 lb/EA (3)
  • 0.27 lb/EA (1)
  • 0.28 lb (1)
  • 0.28 lb/EA (4)
  • 0.3 lb/EA (3)
  • 0.31 lb/EA (2)
  • 0.34 lb (1)
  • 0.35 lb/EA (3)
  • 0.36 lb/EA (1)
  • 0.37 lb/EA (1)
  • 0.39 lb/EA (1)
  • 0.41 lb (1)
  • 0.41 lb/EA (2)
  • 0.44 lb (2)
  • 0.45 lb (1)
  • 0.45 lb/EA (1)
  • 0.46 lb (2)
  • 0.47 lb/EA (1)
  • 0.52 lb/EA (1)
  • 0.53 lb/EA (2)
  • 0.54 lb/EA (1)
  • 0.55 lb (1)
  • 0.55 lb/EA (2)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.62 lb/EA (1)
  • 0.63 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.72 lb (1)
  • 0.7460 lb/EA (1)
  • 0.75 lb (1)
  • 0.75 lb/EA (1)
  • 0.77 lb/EA (1)
  • 0.78 lb/EA (1)
  • 0.79 lb (1)
  • 0.79 lb/EA (1)
  • 0.81 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1 lb/EA (11)
  • 1.0499 lb/EA (1)
  • 1.08 lb (1)
  • 1.35 lb (1)
  • 1.48 lb (1)
  • 1.57 lb/EA (1)
  • 1.87 lb/EA (1)
  • 10 lb (1)
  • 2.1 lb (1)
  • 2.1 oz (59 g) (1)
  • 2.76 lb/EA (1)
  • 2.7999 lb/EA (1)
  • 25 lb (1)
  • 3.053 g (1)
  • 4.283 g (1)
  • 6.724 g (1)
  • Show More...

• Overall Length

  

  • 0.43 in (1)
  • 0.571 in;14.5 mm (2)
  • 0.780 in (5)
  • 0.95 in (1)
  • 0.971 in (1)
  • 0.986 in (2)
  • 1 in (4)
  • 1 in;25.4 mm (2)
  • 1.00 in (1)
  • 1.02 in;25.908 mm (1)
  • 1.06 in (1)
  • 1.07 in (1)
  • 1.087 in;27.6 mm (1)
  • 1.12 in (2)
  • 1.13 in (3)
  • 1.153 in (2)
  • 1.16 in (1)
  • 1.161 in (1)
  • 1.201 in (1)
  • 1.25 in (1)
  • 1.252 in (1)
  • 1.31 in (2)
  • 1.350 in (1)
  • 1.38 in;35.1 mm (2)
  • 1.47 in (4)
  • 1.496 in (1)
  • 1.5 in (1)
  • 1.50 in (2)
  • 1.54 in (1)
  • 1.55 in;39.4 mm (2)
  • 1.6 in (1)
  • 1.62 in (2)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.81 in (1)
  • 1.84 in (2)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-1/8 in (1)
  • 1-11/15 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 13/16 in (1)
  • 1-3/64 in (1)
  • 1-5/32 in (1)
  • 1-61/64 in (1)
  • 1-7/18 in (1)
  • 1-7/8 in (1)
  • 2 in (3)
  • 2.06 in;52 mm (1)
  • 2.12 in (1)
  • 2.18 in (1)
  • 2.25 in (3)
  • 2.252 in (1)
  • 2.47 in (1)
  • 2.50 in (1)
  • 2.63 in (2)
  • 2.68 in (1)
  • 2.75 in (1)
  • 2.795 in (1)
  • 2.81 in (1)
  • 2.85 in;72.4 mm (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-13/16 in (1)
  • 2-3/16 in (1)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3.03 in (1)
  • 3.18 in (2)
  • 3.66 in (1)
  • 3.8 in (1)
  • 3/4 in (1)
  • 3-3/16 in (2)
  • 4 in (2)
  • 4-1/4 in (2)
  • 4-3/16 in (2)
  • 5.52 in (1)
  • 6.38 in (2)
  • 6.5 in (1)
  • 7.52 in (1)
  • 8 in (1)
  • 9.23 in (1)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Butt Splice (3)
  • Compression (25)
  • Compression;Crimp (9)
  • Crimp (6)
  • Insulation Displacement Connector (3)
  • Push-In (3)
  • Screw (43)
  • Splice Connector (3)
  • Split (29)
  • Spring (2)
  • Tension (2)
  • Twist-On (11)
  • Winged (10)
  • Wire Joints (1)
  • Show More...

• Package Quantity

  

  • 1 BG;5 CT (4)
  • 1 ct (8)
  • 1 CT;10 PK (3)
  • 1 CT;100 PK (5)
  • 1 CT;1000 PK (1)
  • 1 CT;10000 PK (1)
  • 1 CT;12 PK (1)
  • 1 CT;150 PK (2)
  • 1 CT;20 PK (1)
  • 1 CT;25 PK (1)
  • 1 CT;30 PK (2)
  • 1 CT;300 PK (1)
  • 1 CT;6 Pk (2)
  • 1 PK (2)
  • 10 CT (2)
  • 10 CT;100 PK (5)
  • 10 CT;240 PK (4)
  • 10 PK (2)
  • 100 BG (1)
  • 100 BG;500 CA (1)
  • 100 BX (16)
  • 100 CA (1)
  • 100 CT (20)
  • 100 CT;1000 PK (3)
  • 100 CT;400 PK (3)
  • 100 CT;500 PK (1)
  • 100 CT;600 PK (6)
  • 100 JR (1)
  • 100 PK (9)
  • 100 Pouch;1 CT;1000 PK (4)
  • 1000 Bin (1)
  • 1000 BX (2)
  • 1000 CA (6)
  • 1000 CT (2)
  • 1000 CT;1000 PK (1)
  • 1000 CT;10000 PK (2)
  • 12 CT (7)
  • 12 CT;120 PK (6)
  • 12 PK (2)
  • 15 CT (1)
  • 15 PK (3)
  • 150 JR (1)
  • 1800 CT (2)
  • 2 CT (3)
  • 20 CT (1)
  • 20 CT;200 PK (1)
  • 20 PC (1)
  • 20 PK (2)
  • 24 CT (2)
  • 240 CT (2)
  • 25 BG (3)
  • 25 CA (1)
  • 25 CT (6)
  • 25 CT;100 PK (2)
  • 25 CT;125 PK (1)
  • 25 CT;150 PK (2)
  • 25 CT;250 PK (14)
  • 25 PK (5)
  • 250 CT (1)
  • 3 CT (5)
  • 3 CT;30 PK (1)
  • 3 PK (1)
  • 300 JR (3)
  • 4 CT (5)
  • 4 CT;40 PK (1)
  • 40 CT (1)
  • 40 PK (1)
  • 5 CT;50 PK (2)
  • 50 BX (3)
  • 50 CT (9)
  • 50 CT;200 PK (1)
  • 50 CT;250 PK (1)
  • 50 CT;500 PK (8)
  • 50 PK (3)
  • 500 BG (10)
  • 500 CA;100 PK (1)
  • 500 CT;5000 PK (5)
  • 500 JR (2)
  • 500 Jug (2)
  • 5000 CA (1)
  • 6 CT (20)
  • 6 CT;60 PK (5)
  • 6 PK (1)
  • 75 CT (2)
  • 75 PK (1)
  • 750 PK (1)
  • 8 CT (1)
  • Show More...

• Outside Diameter

  

  • 0.25 (3)
  • 0.5 (2)
  • 1.5 (2)
  • Show More...

• Maximum Voltage Rating

  

  • 1000 V (2)
  • 300 V (7)
  • 35 kV (18)
  • 400 V (2)
  • 600 V (84)
  • 600 V (Building Wire);1000 V (Maximum Signs/Lighting Fixture) (8)
  • 600 V ac (67)
  • 600 V;1000 V (Lighting Fixture/Luminaries/Sign) (6)
  • Show More...

• Application

  

  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kV¥ (15)
  • Cable & Wire Marking;Panel Labeling (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - O (2)
  • DIRECT BURIAL (1)
  • Drop Ceiling (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (8)
  • Electrical Labeling;Wire and Cable Labeling (8)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (1)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (9)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (6)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Device Grounding Applications (1)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (5)
  • For Direct Burial Applications In Earth Or Concrete, Copper (6)
  • For Direct Burial In Earth And Concrete (2)
  • For Dry Locations (1)
  • For Dry Locations;Insulating and protecting wires and cables (11)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (1)
  • For Grounding And Bonding Applications (5)
  • For high temperature applications over 105 degree C (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (14)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Making Tap Or Parallel Copper Connections (2)
  • For Use With Copper And Aluminum Conductors (2)
  • For use with SNA terminal blocks (2)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (18)
  • Generation - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherDatacenters - Datacenters - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercia (2)
  • Grounding and Bonding Applications (9)
  • Grounding Wire (4)
  • Hollow Walls (7)
  • Industrial Spec Grade (2)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (39)
  • Insulating or Joining 2 or more conductors (19)
  • Insulating or Joining 2 or more conductors in conditions where extreme heat buildup occurs such as high wattage fixtures and signs. (1)
  • Insulating or Joining 2 or more grounding or bonding conductors (1)
  • Male Stud, For grounding two copper code conductors to steel structures, busbars, or transformers or for tapping busbar with a hex nut and washer (1)
  • Marking Wire and Cable (4)
  • NSI (6)
  • Overhead Tension Connection (2)
  • Provides terminating point for a group of wires running in one direction (4)
  • Residential (1)
  • Residential and commercial wiring jobs (6)
  • RG6-U Cable (1)
  • Splicing Wire (30)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (21)
  • Terminate, Splice, Tap Power Connectors (73)
  • Terminate-Splice-Tap (2)
  • Used to bundle and secure wire and cable. (2)
  • Utility/Ground Grid (7)
  • Wire Identification (3)
  • Wire Labeling (1)
  • Wire Marking (7)
  • Wire Termination (140)
  • Show More...

• Poles

  

  • 1 (158)
  • 4 (1)
  • Show More...

• Category Description

  

  • CABLE & PIPE TRANSITS (1)
  • CADDY (STRAPS ONLY) (1)
  • Commercial switches (1)
  • Comp & Mech Lugs and Butt Splices (171)
  • Datacom Wiring Devices and Accessories (13)
  • DISCONNECTS (2)
  • FASTENERS (4)
  • Fuses & Fuse Accessories (8)
  • HAND TOOLS (5)
  • HEAT/COLD SHRINK (7)
  • MISC FITTINGS (4)
  • Residential Switches (1)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (8)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (74)
  • SPLICE KITS (56)
  • SPLIT BOLTS (178)
  • SPRING NUTS & TWIRL NUTS (7)
  • STRUT CHANNEL (1)
  • T&B C TAP LUGS (32)
  • TAPE (1)
  • TERMINAL BLOCK ACESSORIES (4)
  • TERMINAL BLOCKS POWER DIST BLOCKS (11)
  • TERMINALS (37)
  • TRANSFORMER ACCESSORIES (1)
  • WIRE LUBE, MARKERS, & TIES (71)
  • WIRE NUTS (108)
  • Show More...

• Housing Material

  

  • Aluminum (83)
  • Copper (21)
  • Thermoplastic (5)
  • Tin Plated Copper (6)
  • Show More...

• Wire Type

  

  • 2 Conductor With Ground (1)
  • 3 Conductor With Ground (1)
  • Al/Cu (4)
  • ALUMINUM/COPPER (5)
  • B,C,D,K,M,I (12)
  • Class A & B (28)
  • Class B & C (80)
  • COPPER (19)
  • CU Wire Only (25)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • STRANDED (1)
  • Show More...

• Stud Size

  

  • #10 (1)
  • 1/2 (28)
  • 1/4 (9)
  • 3/8 (4)
  • Show More...

• Temperature Rating

  

  • 105 C (15)
  • 105 DEG C (1)
  • 105 DEG C Shell Rated (11)
  • 170 (4)
  • 194° F (2)
  • -40 F to 250 F (3)
  • -40 To 180 (7)
  • 75 C (3)
  • 90 (4)
  • 90 C (71)
  • 90 DEG C (1)
  • 900 DEG F (1)
  • Show More...

• Minimum Qty

  

  • 10 (1)
  • 100 (55)
  • 1000 (2)
  • 150 (3)
  • 200 (1)
  • 20000 (1)
  • 25 (5)
  • 250 (11)
  • 30 (1)
  • 300 (3)
  • 350 (1)
  • 50 (18)
  • 500 (27)
  • 750 (2)
  • Show More...

• Type

  

  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Single Lug (3)
  • Aluminum Splice (15)
  • AMS, Dual Rated (2)
  • Automatic Tension Splice (2)
  • Bi-Metallic Pin (1)
  • BUTT (1)
  • Butt Splice (3)
  • Cable Connector (2)
  • Compression Connectors - Splices (1)
  • Compression Lug (6)
  • Compression Tap (5)
  • Copper C Taps (2)
  • Copper Connectors (3)
  • Copper Split Bolts (11)
  • Crimp Sleeve Wire Connectors (3)
  • C-Tap (4)
  • C-Taps (5)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Dual-Rated (3)
  • Dual-Rated Mechanical Connector (17)
  • E-Tap Grounding Connectors (1)
  • E-Z-Ground Compression Grounding (1)
  • F Connectors (1)
  • GAR (16)
  • GAR-BU (2)
  • GB (3)
  • GBM (3)
  • GC (4)
  • Gel Tap Splice Kits With Connector (2)
  • Grounding Connector (3)
  • Grounding Connectors - Service Post, Male Stud, two- Conductors (1)
  • Heat-Shrink (12)
  • High Temperature Twist-On (1)
  • H-Type Compression Tap Connector (10)
  • In-Line Gel Splice Kit (1)
  • IN-Line Splicer/Reducer (4)
  • Insulated Conductor Connectors (3)
  • Insulation Displacement (12)
  • Insulation Piercing Connectors (3)
  • KC and K2C Series (23)
  • KS, Compact (6)
  • Lay-In Ground Lug Direct Burial (1)
  • Locking Fork Terminal (3)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (2)
  • Long Barrel - Two Hole (5)
  • Mechanical Grounding (11)
  • Mechanical Split Bolt Connector (9)
  • Multi Cable (14)
  • Mushroom Head with Spring Wing (7)
  • Non-Metallic Cable Splices And Taps (2)
  • Nylon Insulated Wire Joint (4)
  • Offset Entry (3)
  • PIGTAIL (1)
  • Plug Tail Connector (2)
  • Pre-printed Books (5)
  • Pre-Printed Wire Marker Book (4)
  • Push In Wire Connectors (3)
  • Push-In (11)
  • Replacement Sleeves (3)
  • Ring Terminal (1)
  • Roll-On Splice Kits (1)
  • Secure Grip Wire Connectors (6)
  • Self-Laminating Label (3)
  • Service Post Connectors (8)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (13)
  • Single Sided Entry (22)
  • SLEEVE (9)
  • SPLICE (13)
  • Splice Cap (1)
  • Splice Connector (2)
  • Split-Bolt (21)
  • Spring Nut (6)
  • Standard Barrel - ALCU Splice (6)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Wire Connectors (8)
  • Strong Tack Adhesive (1)
  • Submersible Pedestal Connectors (9)
  • TAP, STANDARD BEAM, ANGLED FLANGE (1)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (7)
  • Taps (4)
  • Terminal Block (9)
  • Terminal blocks (2)
  • Tin Plated Copper Split Bolt (9)
  • Twist-On (20)
  • Two-Bolt Connector (1)
  • UF Cable Splice Kit (1)
  • Vinyl Insulated (1)
  • Vinyl Insulated Butt Splice (6)
  • Wide Range Tap Connectors (3)
  • Winged Wire Connectors (11)
  • WIRE (4)
  • Wire Connectors & Termination (2)
  • Wire Marker Books (14)
  • WITH SPRING (2)
  • Write-On Dispenser with Tape & Pen (4)
  • YC-C Series (2)
  • Show More...

• Mounting

  

  • 1/2 Mounting Hole (9)
  • 1/2 Mounting Holes (15)
  • 1/4 Mounting Hole (5)
  • 1-1/8 (2)
  • 3/8 Mounting Hole (4)
  • Clamp (3)
  • None (10)
  • Snap In Mount (2)
  • Switch (2)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • #24-8 AWG (2)
  • #26-10 AWG (2)
  • #4 to 4/0 AWG (Main);#14 to #4 AWG (Tap) (1)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.187 in Dia x 1 in W (2)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.38 (3)
  • 1 SOL - 2/0 STR (1)
  • 1 SOL - 4/0 STR (1)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (8)
  • 1/0-8 AWG (1)
  • 10 SOL - 2 STR (1)
  • 10 SOL - 6 SOL (1)
  • 10 STR - 6 STR (1)
  • 12-10 AWG (1)
  • 12-14 AWG (2)
  • 14 (1)
  • 16 STR - 8 STR (1)
  • 16-10 AWG (1)
  • 2 SOL - 2 STR (1)
  • 2 SOL - 2/0 STR (1)
  • 2 SOL - 3/0 STR (1)
  • 2/0-14 AWG (5)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-10 AWG (1)
  • 250 MCM-6 AWG (13)
  • 3/0 SOL - 4/0 STR (1)
  • 3/0 STR - 350 MCM (1)
  • 3/0 STR - 500 MCM (1)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 350 TO 500 KCMIL (MAIN), 4 TO 4/0 AWG (TAP) (1)
  • 4 SOL - 1/0 STR (2)
  • 4 STR - 2 STR (1)
  • 4 to 14 AWG (1)
  • 4/0 STR - 350 MCM (1)
  • 4-14 AWG (8)
  • 500 MCM-4 AWG (10)
  • 6 SOL - 1/0 STR (2)
  • 6 SOL - 2 SOL (1)
  • 6 STR - 2/0 SOL (1)
  • 600 MCM-6 AWG (4)
  • 750-250 MCM (7)
  • 8 SOL - 2 STR (1)
  • 8 SOL - 4 SOL (1)
  • Show More...

• Size

  

  • #4 — #3 AWG Code STR, #2 AWG Code SOL (1)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (2)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (1)
  • 0.22 x 1.56 es (3)
  • 0.335 in H x 1 in W (2)
  • 0.335 in H x 1.75 in W (2)
  • 0.355 IN Length X 0.907 IN Width X 0.729 IN Height (1)
  • 0.607 IN Length X 0.603 IN Width X 0.729 IN Height (1)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1/2 (1)
  • 1/2 In-13 TPI (2)
  • 1/4 X 1-1/2 IN Marker (11)
  • 2-25/32 inch (1)
  • 3/16 x 3 (2)
  • 3/4 (1)
  • 4/0 AWG Code (1)
  • 4/0-8 AWG (1)
  • 6 In (2)
  • 8 IN Length (1)
  • For RG6-U Cable (1)
  • H=.866 - W=.500 - ID=.197 (1)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.04 - W=.642 - ID=.339 (1)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.14 - W=.720 - ID=.283 (1)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=1.31 - W=1.00 - ID=.394 (1)
  • H=1.57 - W=1.26 - ID=.472 (1)
  • H=6.00 - W=3.25 (3)
  • L=.900 - OD=.270 - ID=.170 (1)
  • L=1.00 - OD=.340 - ID=.250 (1)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.25 - OD=.420 - ID=.310 (1)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (1)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (1)
  • L=1.50 - W=.560 - OD=.340 - ID=.250 (1)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.60 - OD=.520 - ID=.390 (1)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.75 - OD=.270 - ID=.170 (1)
  • L=1.75 - OD=.560 - ID=.440 (1)
  • L=1.75 - OD=.620 - ID=.490 (1)
  • L=1.80 - OD=.470 - ID=.360 (1)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (1)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (1)
  • L=1.83 - W=.739 - OD=.519 - ID=.389 (1)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.90 - OD=.690 - ID=.550 (1)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.10 - OD=.810 - ID=.660 (1)
  • L=2.106 - W=1.102 (2)
  • L=2.20 - OD=.469 - ID=.359 (1)
  • L=2.20 - OD=.519 - ID=.389 (1)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.24 - W=.810 - OD=.560 - ID=.440 (1)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.900 - OD=.620 - ID=.490 (1)
  • L=2.37 - OD=.527 - ID=.307 (1)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=2.50 - OD=.629 - ID=.389 (1)
  • L=2.50 - OD=1.06 - ID=.830 (1)
  • L=2.61 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=2.62 - OD=.689 - ID=.440 (1)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.00 - W=1.02 - OD=.759 - ID=.480 (1)
  • L=3.03 - W=1.09 - OD=.752 - ID=.594 (1)
  • L=3.28 - W=1.54 - OD=1.06 - ID=.830 (1)
  • L=3.50 - W=1.25 - OD=.921 - ID=.590 (1)
  • L=3.90 - W=3.00 - H=4.50 (1)
  • L=4.24 - W=1.51 - OD=1.11 - ID=.720 (1)
  • L=4.25 - OD=1.06 - ID=.830 (1)
  • L=4.74 - W=.84 - OD=.63 - ID=.39 (1)
  • L=4.74 - W=1.78 - OD=1.31 - ID=.838 (1)
  • L=4.79 - W=.937 - OD=.690 - ID=.440 (1)
  • L=4.96 - OD=1.50 - ID=.921 - Pin Dia=.688 (1)
  • L=4.96 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=5.00 - W=1.02 - OD=.759 - ID=.479 (1)
  • L=5.24 - W=1.14 - OD=.840 - ID=.550 (1)
  • L=5.30 - W=1.25 - OD=.920 - ID=.590 (1)
  • L=5.31 - W=1.19 - OD=.815 - ID=.657 (1)
  • L=5.39 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=5.47 - W=1.39 - OD=.950 - ID=.760 (1)
  • L=5.50 - W=1.37 - OD=1.01 - ID=.650 (1)
  • L=5.87 - W=1.51 - OD=1.12 - ID=.720 (1)
  • L=6.30 - W=1.90 - OD=1.31 - ID=1.04 (1)
  • L=6.42 - W=1.60 - OD=1.19 - ID=.759 (1)
  • L=6.50 - W=1.78 - OD=1.32 - ID=.840 (1)
  • Length 1-1/2 inch (1)
  • Length 1-11/16 inch (1)
  • Length 1-13/16 inch (2)
  • Length 1-7/16 inch (1)
  • Length 1-7/8 inch (1)
  • Length 2-3/16 inch (1)
  • Length 2-7/16 inch (1)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Show More...