Filter Your Results

• Brands & Manufacturers
• Abb Installation Products, Inc

---

• Product Type

  

  • 1 1/2 Inch Ground Bushing Alu (1)
  • 1 Inch Snap-Loc Reducer (1)
  • 1.5 Gray Duct Cover (2)
  • 1/2 Inch Blue Ent 10 (1)
  • 1/2 Inch Male Adapter Snap-In (2)
  • 1-1/2 Inch Blue Ent 750 Reel (1)
  • 1-1/2IN 90D LT Noninsul GRND Conn I (1)
  • 1-1/2IN Electrogalv Iron Pipe Strap (1)
  • 11/4 In 90 Deg Nometalic Type A Con (2)
  • 1-1/4IN 45D LT Conn Typea Cond Irn (1)
  • 1IN 45D LT GRND Conn W/Lug Iron (1)
  • 1IN 90D LT Cord Conn .77-.895 Nyl (1)
  • 1IN 90D LT Noninsul GRND Conn Irn (1)
  • 1IN Riser Gard Corr Org 250FT (1)
  • 1IN Wire Mesh Grip Assy (1)
  • 2 In T&B Zinc Grounding Conduit Hub (1)
  • 2 Inch Ground Bushing Alu (1)
  • 2 Inch X 3 Inch Base Spacer (1)
  • 2 Inch X 3 Inch Intermediate Spacer (1)
  • 2/0 Cu STD BRL. 1 Hole 5/16 In Bolt (1)
  • 2-Hole CLSD Angl FTG Eg STL (1)
  • 2IN 90D LT Noninsul GRND Conn Irn (1)
  • 2IN Electrogalv Iron Pipe Strap (1)
  • 2WAY Al Splice Conn 500WIRE PNK (1)
  • 2WAY MTG Base 1.13X1.13IN Nyl Adh (1)
  • 3 In Insul Ground Liq Tight 90 Deg (1)
  • 3 Inch Zinc GR Conduit Hub (1)
  • 3/4 Black Beauty Cord Fit .250-.400 (1)
  • 3/4 Inch Ent Coupling (2)
  • 3/4 Inch Erickson Coupling (2)
  • 3/4 Inch Male Adapter Snap-In (2)
  • 3/4IN Electrogalv Iron Pipe Strap (1)
  • 3/4IN GRND Bush 14-2/0WIRE Range Al (1)
  • 350 Cu STD BRL 1 Hole 3/8 Inch Bolt (1)
  • 3-Hole Splice PLT LEN5-3/8 Eg STL (1)
  • 4 SQ BX, STL, 30CU, 1/23/4E-Ko MS Arm (1)
  • 4 Way Mini Base .75X.75 (1)
  • 4/0 20 Cu In Ceil BX W/Nails&GD Lu (1)
  • 400 Weld Cu.STD.BRL.1 Hole.5 Inchb (1)
  • 54857BE With Peep Hole (1)
  • 90 Degree Fitting (2)
  • 90DEG FTG HT4-1/8IN LEN3-1/2IN SS (1)
  • Adjustable Bar Hanger (2)
  • Adjustable Outlet Box (1)
  • Al Insul Bus Conn 12-350 4-13/16 Oi (1)
  • Al JKTD XP FTG Hub 1/2 In .525-.650 (1)
  • Al Serv Entr Splice A:1/0 B:4SLD (1)
  • Al Serv Entr Splice A:3/0 B:3/0 5.5 (1)
  • Al Serventr Comp Splice A:1/0 B:3-4 (1)
  • Al Serventr Comp Splice A:1/0 B:6 (1)
  • Al Serventr Comp Splice A:2/0 B:1/0 (1)
  • Al Serventr Comp Splice A:3-4 B:10 (1)
  • Al Serventr Splice A:1 B:1 3.5 (1)
  • Al Serventr Splice A:4/0 B:1/0 3.5 (1)
  • Al Serventr Splice A:4/0 B:1-2 3.5 (1)
  • Al Serventr Splice A:4/0 B:3-4 3.5 (1)
  • Al TP 1HL Lug Long BRL 350 5/8B BRN (1)
  • Al TP 1HL Lug Long BRL 600 5/8B BLK (1)
  • Al TP 1HL Lug Long BRL NO4 3/8B GRN (1)
  • Al TP 2HL Lug Long BRL 1/0 3/8B Tan (1)
  • Al.12INWX6IND Iv-90 24inrad (1)
  • Al.24INWX6IND Iv-90 24inrad (1)
  • AMT Connector (2)
  • Angle Plate Connector (1)
  • Angular Fitting (7)
  • Automatic Tension Splice Connector (2)
  • Beam Clamp (7)
  • Box Cover (5)
  • Butt Splice (4)
  • Butt Splice Connector (11)
  • Cable Gland (4)
  • Cable Staple (3)
  • Cable Tie (42)
  • Cable Tie 120LB 13 In Nat Nyl 2-PC (1)
  • Cable Tie 120LB 13.4IN Natural Nylo (1)
  • Cable Tie 5.5IN 40LB Uv Black (1)
  • Cable Tie 50LB 14.2IN Uv Black Nylo (1)
  • Cable Tie 50LB 7.31IN Uv Black Nylo (1)
  • Cable Tie 50LB 7.31IN Uv BLK (1)
  • Cable Tie 50LB 7.8IN BLK Nyl MTG Ho (1)
  • Cable Tie Mounting Base (7)
  • Carpet Cover Plate, Brass, 1-Piece (1)
  • Carpet Plate and Cover (2)
  • Cast BRZ GRD Clamp 10-2 (1)
  • CBL Tie 120LB 13.4 Uv Black (1)
  • CBL Tie 30LB 11.10 Po Nat Nylon (1)
  • CBL Tie 30LB 11.1PO Uv Black (1)
  • CBL Tie 30LB 8IN Uv Black 2-PC Dist (1)
  • CBL Tie 50LB 14.2PO Uv Black (1)
  • Ceiling Box (4)
  • Ceiling Fan Outlet Box with Plastic Romex Connector (1)
  • CHNL 12GA 1-5/8X1-5/8 20FT PG STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT Eg STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT HDG STL (1)
  • CHNL Nut 3/8-16IN STL (1)
  • Clamp (3)
  • Coated Conduit (1)
  • Compression Connector (9)
  • Compression Coupling (8)
  • Compression H-Tap Connector (1)
  • Compression Lug (14)
  • Compression Splice (3)
  • Concrete Box Cover (1)
  • Cond/Pipe HGR 1.5IN Rigid W/O BLT (1)
  • Cond/Pipe HGR 1/2IN STL W/ BLT (1)
  • Cond/Pipe HGR 1IN STN-STL W/ BLT (1)
  • Cond/Pipe HGR Emt SZ1-1/2IN W/O BLT (1)
  • Conduit Body (2)
  • Connector (4)
  • Copper Connector (3)
  • Coupling (2)
  • C-Tap (4)
  • Cu TP 1HL Lug Longbrl NO1 5/16B GLD (1)
  • Cu TP 2HL Lug Longbrl 1/0 5/16 PNK (1)
  • Cu TP 2HL Lug Longbrl 3/0 1/2B Org (1)
  • Cu TP 2HL Lug Longbrl 4/0 3/8B Pur (2)
  • Cu TP Splice Long BRL 350STR Red (1)
  • Cu TP Splice Long BRL 400 Blu (1)
  • Cushioned Clamp (1)
  • Device Box (4)
  • Device Cover (4)
  • Draft Tight Ceiling Fan Box W/Bar (1)
  • Emt Set Screw Connector (9)
  • End Cap (2)
  • Ent Adptr 1IN Blue PC (1)
  • Ent Flex Rcwy Tubing 1INX10FT Blue (1)
  • ENT Flexible Raceway (9)
  • Exp Ins Vinyl Ring Term, 18-14, No6 (1)
  • Female Disconnect (3)
  • Female Disconnector (5)
  • Flat Fitting (1)
  • Flat Tee Plate Fitting (2)
  • Floor Box (2)
  • Floor Box Cover (5)
  • Flush Service Floor Box (1)
  • Fork Terminal (11)
  • GRD Clamp For Dir Burial 2 STR-10 S (1)
  • Ground Clamp (3)
  • Ground Rod Clamp (2)
  • Half-Slot Channel (17)
  • Hanger (3)
  • Heat-SHR Butt Splice 12-10 Len 1.6 (1)
  • HS CHNL 14GA 1-5/8X13/16 20FT Eg (1)
  • H-STRNGTH Splitblt Conn 750-600 (1)
  • H-Type Compression Connector (9)
  • Hub Connector (10)
  • Ins Nyl Fork Term 22-16 BLT NO8 Red (1)
  • Ins Nyl LKG Fork Term 18-14 No10 (1)
  • Ins Vin Ring Term 12-10 5/16IN Yel (1)
  • Ins Vinl Fork Term 12-10 BLT NO8 Ye (1)
  • Ins Vinyl Fork Term 22-16 NO10 Red (1)
  • Ins Vinyl Ring Term 18-14 1/4IN Blu (1)
  • Ins Vinyl Ring Term 22-16 NO6 Red (1)
  • Insul.90 Deg Liquidtite GRD FTG 1/2 (1)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Ferrule (4)
  • Insulating Sleeve (12)
  • Junction Box (3)
  • Liquid Tight 45° Connector (13)
  • Liquid Tight 45°Connector (13)
  • Liquid Tight 90° Connector (16)
  • Liquid Tight 90°Connector (16)
  • Liquid Tight Flexible 90°Connector (1)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Ground 45° Connector (1)
  • Liquid Tight Ground 45°Connector (1)
  • Liquid Tight Ground Connector (1)
  • Liquid Tight Straight Connector (19)
  • Low-Voltage Bracket (3)
  • Male Tab (1)
  • Manual Crimp Tool (2)
  • Masonry Box (3)
  • Mechanical Connector Lug (17)
  • Meter Riser (2)
  • Mounting Bracket (1)
  • Nail-On Zip Box (1)
  • NO2 Cu STDBRL 1 Hole 5/16 Inch Bolt (1)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (3)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • NS Vinl Ring Term 12-10 NO8 Yellow (1)
  • Octagon Box Cover (2)
  • Octagon Box Extension Ring (2)
  • Octagonal Box (11)
  • Old Work Box (7)
  • Old Work Switch Box (1)
  • Outlet & Switch Box (3)
  • Outlet Box (27)
  • Pan Box (1)
  • Panelboard Lug (1)
  • Post Base (2)
  • RC Beam CLP Cond SZ 2IN Mall Iron (1)
  • RCS Beam OD1.050IN Nom SZ .75IN STL (1)
  • Reg SPR Stud Nut SZ 1/4X1IN STL (1)
  • RGD Cond CLP 1/2IN 14GA HDG Steel (1)
  • RGD Cond CLP 1-1/4IN 14GA HDG STL (1)
  • RGD Cond CLP 1IN 14GA HDG STL (1)
  • RGD Cond CLP 2-1/2IN 12GA Aluminum (1)
  • RGD Cond CLP 2-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 3IN 12GA Aluminum (1)
  • RGD Cond CLP 3IN 12GA HDG Steel (1)
  • RGD Cond CLP 4IN 11GA HDG Steel (1)
  • Ring Terminal (10)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (9)
  • Set Screw Coupling (8)
  • Split Bolt Connector (14)
  • Spring Channel Nut (1)
  • Spring Nut (6)
  • SQ WSHR 1.5X1.5IN SZ 1/2IN STN-STL (1)
  • Square Box (1)
  • Square Box Cover (3)
  • Square Box Extension Ring (4)
  • Square Device Cover (11)
  • Square Post Base (2)
  • Square Surface Cover (12)
  • Square Tile Cover (1)
  • Square Washer (4)
  • SRVC Post/DBL 1/0-2 STR/Sol (1)
  • SRVC Post/Single 4/0-2 STR 4/0-1sol (1)
  • Standard Barrel Single Hole Compression Lug (18)
  • Standard Channel (23)
  • Staple (4)
  • Steel Channel (2)
  • STL CVR 7.5CU-In 4-11/16, 1/2 Deep (1)
  • STL CVR 8.3CU-In 4-11/16X1-1/4raise (1)
  • Strain Relief Connector (11)
  • Strain Relief Cord Connector (2)
  • Strut Strap (18)
  • Switch Box (14)
  • T Box (2)
  • Tee PLT HT 3-1/2IN Len 5-3/8IN HDG (1)
  • Thread Rod (3)
  • Three Hole Corner PLT STN STL (1)
  • Tie 11LB 4" DRK Blue Ny Det-Ant (1)
  • Tower GRND CLMP, 2/0 Max, NO4 Min (1)
  • Two-Way Splice Connector (9)
  • Universal Clamp (6)
  • Universal Cone Nut (3)
  • Upright Fitting (4)
  • Utility Box (7)
  • Utility Box Cover (6)
  • Weatherproof Receptacle Cover (2)
  • Wedge Clamp (3)
  • Wire Holder (4)
  • Wire Marker Book (4)
  • Wiring Duct (3)
  • Wiring Duct Cover (2)
  • Zip Box (1)
  • Show More...

• Brand

  

  • 1.000 EA (1)
  • Abb Installation Products, Inc (28)
  • Blackburn Grounding (39)
  • Blackburn Mechanical (160)
  • Carlon (178)
  • Carlon / Nutek (1)
  • Carlon(R) (23)
  • Catamount (32)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (174)
  • Deltec (2)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • For Dry, Damp or Wet Locations Where Flexibility is Necessary (1)
  • Homac (7)
  • Iberville (2)
  • Iberville(R) (2)
  • Kindorf (19)
  • OCAL (11)
  • Red Dot (6)
  • Red•Dot(R) (4)
  • Shrink-Kon (3)
  • Sta-Kon (166)
  • Star Teck (3)
  • Steel City (325)
  • Superstrut (138)
  • T&B (1)
  • T&B Cable Tray (2)
  • T&B Elec Suppl (10)
  • T&B Fittings (1)
  • T&B Ind Fitting (297)
  • T&B Liquidtight Fittings (5)
  • T&B Liquidtight Systems (4)
  • T&B Rigid Fittings (2)
  • Thomas & Betts (59)
  • Thomas&Betts-Abb Ins Prod (94)
  • Tools & Accessories (7)
  • Ty-Duct (8)
  • Ty-Fast (1)
  • Ty-Grip (1)
  • Ty-Rap (77)
  • Union Box/CVR (2)
  • Show More...

• Finish

  

  • Aluminum lacquer (2)
  • Bare (4)
  • Brass (2)
  • Electro Plated (1)
  • Electro -Tin Plated (14)
  • Electro Zinc Plated/Chromate Coating (35)
  • Electro Zinc Plated-Chromate Coated (1)
  • Electro-galvanized (18)
  • Electro-Plated (1)
  • Galvanized (20)
  • Galvanized-Krom (1)
  • Galvanized-Krom/Standard (7)
  • Galv-Krom/Standard (3)
  • Gold (6)
  • Gold Galvanized (12)
  • Gold Galvanized/Standard (5)
  • GoldGalv (4)
  • GoldGalv/Standard (12)
  • Green Urethane Powder (2)
  • Hot Dip Galvanized (13)
  • Hot Dip Galvanized;PVC Coated (1)
  • Hot-Dipped Galvanized (3)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • Powder Coated (2)
  • Powder-coated (2)
  • Pre Galvanized (9)
  • Pre-Galvanized (153)
  • PVC Coated (2)
  • PVC Exterior Coating;Urethane Interior Coating (1)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Silver Galvanized (8)
  • Silver Galvanized/Electro-Galvanized (17)
  • SilverGalv (8)
  • SilverGalv/Electro-Galvanized (14)
  • Tin Plated (57)
  • Tinned (36)
  • Tin-Plated (29)
  • TPR Jacket (4)
  • Uncoated (1)
  • Untreated (3)
  • Zinc (1)
  • Zinc Electroplated/Chromate Coating (53)
  • Zinc Plated (63)
  • Zinc Plating/Clear Chromate (8)
  • Zinc-Plating with Acrylic Coating (2)
  • Show More...

• Color

  

  • Aluminum (1)
  • Beige (2)
  • Black (67)
  • Black on Orange (1)
  • Black with Brass Flange (1)
  • Blue (161)
  • Blue/Gray (1)
  • Brass (8)
  • Brown (36)
  • Caramel (1)
  • GB (1)
  • Gold (12)
  • Gray (105)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Gray 0 (2)
  • Green (23)
  • Handle: Yellow;Blue (2)
  • Ivory (20)
  • Metallic (60)
  • Multiple Colors (1)
  • Natural (10)
  • OLIVE (4)
  • Orange (26)
  • Pink (17)
  • Purple (12)
  • Red (66)
  • Red and Black Header on White (1)
  • Red;Silver (3)
  • RUBY (3)
  • Silver (239)
  • Slate (1)
  • Tan (3)
  • Taupe (1)
  • White (18)
  • Yellow (69)
  • Show More...

• Material

  

  • 6061-T6 Aluminum Connector, Santoprene Body (1)
  • Aluminum (173)
  • ALUMINUM ALLOY (3)
  • Aluminum Die Cast (1)
  • Body - Modified Neoprene Elastomer, Straps - Nylon (1)
  • Brass (43)
  • Brass with Copper Sleeve (4)
  • Brass;Non-Metallic (1)
  • Bronze Alloy (17)
  • Carbon Steel (3)
  • Carrying Case is Plastic (1)
  • Compound (3)
  • Copper (314)
  • Copper (Conductor) (4)
  • COPPER ALLOY (7)
  • Die Cast Aluminum (1)
  • Die Cast Zinc (1)
  • Die Cast Zinc Alloy (1)
  • Die Cast Zinc/Galvanized Steel (1)
  • Die-Cast Aluminum (5)
  • Galvanized Aluminum (1)
  • IRON (1)
  • Lime Crystal Glass (3)
  • Low Carbon Steel (2)
  • Malleable Iron (92)
  • Metal (1)
  • Nickel Alloy (1)
  • Non-Metallic (68)
  • Noryl (1)
  • Nylon (23)
  • Nylon 6.6 (1)
  • Nylon/Polyamide 6.6 (37)
  • Plastic (4)
  • Plastic;Steel (Closure) (1)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (15)
  • Polyester (4)
  • Polyethylene (5)
  • Polyolefin (2)
  • Polypropylene (2)
  • Porcelain (3)
  • PVC (34)
  • PVC Coated Zinc (1)
  • PVC insulated (1)
  • Rigid PVC (4)
  • Stainless Steel (33)
  • Stamped Aluminum (1)
  • STAMPED STEEL (4)
  • Steel (367)
  • Steel (Closure);Vinyl (End Cover) (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (29)
  • Thermoplastic Rubber (2)
  • Vinyl (8)
  • Vinyl Cloth (8)
  • Weatherable Polyethylene (1)
  • Weather-Resistant Nylon 6.6 (16)
  • Zinc (10)
  • Zinc Alloy (1)
  • Zinc Die Cast (3)
  • Show More...

• Trade Size

  

  • 0.75 (1)
  • 1 in (31)
  • 1 in , 27 mm (1)
  • 1 INCH (5)
  • 1 to 1/2 in (1)
  • 1/2 in (34)
  • 1/2 INCH (2)
  • 1-1/2 in (22)
  • 1-1/2 in , 41 mm (1)
  • 1-1/2 in;35 mm (1)
  • 1-1/2 INCH (1)
  • 1-1/4 in (14)
  • 1-1/4 in , 35 mm (1)
  • 1-1/4 INCH (4)
  • 2 (2)
  • 2 in (24)
  • 2 in , 53 mm (1)
  • 2 Inches (4)
  • 2-1/2 IN (9)
  • 2-1/2 Inches (2)
  • 3 (2)
  • 3 in (14)
  • 3 Inches (2)
  • 3/4 in (41)
  • 3/4 to 1/2 in (1)
  • 3/8 in (5)
  • 3-1/2 in (1)
  • 4 (1)
  • 4 in (7)
  • 4 in , 103 mm (1)
  • Show More...

• Capacity

  

  • 10.3 cu.in (1)
  • 10.5 cu.in (1)
  • 1000 lb (1)
  • 12 cu.in (1)
  • 12.5 cu.in (6)
  • 13 cu.in (2)
  • 13.5 cu.in (1)
  • 14 cu.in (4)
  • 14 ga (1)
  • 14.5 cu.in (3)
  • 15 cu.in (1)
  • 15.16 cu.in (2)
  • 15.8 cu.in (9)
  • 16 cu.in (2)
  • 16.5 cu.in (1)
  • 1650 lb (3)
  • 17 cu.in (1)
  • 18 cu.in (8)
  • 18 cu.in;295 ml (1)
  • 19 cu.in (1)
  • 1900 lb (1)
  • 20 cu.in (5)
  • 20.5 cu.in (1)
  • 21 cu.in (7)
  • 2150 lb (1)
  • 22 cu.in (3)
  • 22.5 cu.in (4)
  • 2200 lb (1)
  • 25 cu.in (1)
  • 29.5 cu.in (1)
  • 30.3 cu.in (5)
  • 3000 lb (1)
  • 31.8 cu.in (1)
  • 32 cu.in (3)
  • 34 cu.in (1)
  • 35 cu.in (1)
  • 3500 lb (1)
  • 36 cu.in (1)
  • 4 cu.in (1)
  • 400 lb (1)
  • 42 cu.in (4)
  • 44 cu.in (1)
  • 47 cu.in (1)
  • 5 cu.in (13)
  • 52 cu.in (1)
  • 55 cu.in (1)
  • 550 lb (2)
  • 56.5 cu.in (1)
  • 58 cu.in (1)
  • 6 cu.in (2)
  • 60 cu.in (2)
  • 63.5 cu.in (1)
  • 7.5 cu.in (2)
  • 71 cu.in (1)
  • 750 lb (9)
  • 8 cu.in (2)
  • 800 lb (9)
  • 90 cu.in (1)
  • 900 lb (1)
  • 97.4 cu.in (1)
  • Show More...

• Model

  

  • Lampholders, Garden Lights & Accessories (1)
  • NBBG-G Series (3)
  • Show More...

• Shape

  

  • Octagon (15)
  • Rectangular (68)
  • Round (14)
  • Square (95)
  • Straight (11)
  • Show More...

• Number Of Gangs

  

  • 1 (51)
  • 2 (9)
  • 3 (6)
  • 4 (5)
  • Show More...

• For Use With

  

  • 3/8 in Wall Board and Plaster;1/2 in Wall Board and Plaster;5/8 in Wall Board and Plaster (2)
  • 4 in Square Outlet Box;One 30 or 50 Amp Dryer;Range Receptacle (1)
  • 4 in Square Outlet Box;One 4-Wire Twist-Lock Single Receptacle (1)
  • 4 in Square Outlet Box;One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Duplex Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Toggle Switch (1)
  • 4 in Square Outlet Box;One Single Flush Receptacle (1)
  • 4 in Square Outlet Box;One Toggle Switch (1)
  • 4 in Square Outlet Box;One Toggle Switch and One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;Two Duplex Flush Receptacles (1)
  • 4 in Square Outlet Box;Two Ground Fault Receptacles (1)
  • 4 in Square Outlet Box;Two Toggle Switches (1)
  • 4 in. Square and 4-11/16 in. Boxes;1-1/2 in. and 2-1/8 in. Deep (1)
  • 4-Wire Twist-Lock Single Flush Receptacle (1)
  • 68 and 600 Series Floor Boxes (1)
  • 68 P Floor Box (3)
  • A and C Series Channel and Inserts (5)
  • A-1200 & A-1400 Series Channel (1)
  • A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (1)
  • A-1200, B-1200, C-1200, A-1400, B-1400 and B-1402 Series Channels (1)
  • A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • All Kind or F Channels (1)
  • Aluminum/Copper Code Conductor (3)
  • B 900;B 905;B 906 and B 907 Series Channel (1)
  • B Series Channel and Inserts (1)
  • B-1400 Series Channel (1)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Cable Tray (7)
  • Carflex Conduit and Carflex X-Flex Conduit (3)
  • Conduit (44)
  • Copper and Aluminum Conductor (17)
  • Copper Conductor (44)
  • Direct Burial (1)
  • Direct Sunlight (2)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components and Terminal Blocks in Dry, Damp and Wet Locations (2)
  • Drywall (1)
  • Electrical Non-Metallic Tubing (EMT) or Non-Metallic Sheathed Cable (1)
  • EMT Conduit (35)
  • For Combinations of Aluminum-to-Aluminum Conductors;Aluminum-to-Copper Conductors (3)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • General Control and Power Cable Applications (2)
  • Hydraulic Tool (9)
  • Jacketed Metal Clad Cable (1)
  • Kind or F Channels (2)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (3)
  • Liquid-Tight Flexible Metallic Conduit (33)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Non-Metallic Sheathed Cable (14)
  • Non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (1)
  • Non-Metallic Wiring System (3)
  • On Grade/Below Grade Application;Power;Data;Communications (2)
  • One 30 or 50 Amp Dryer;Range Receptacle (1)
  • One Gang Utility Box (5)
  • Overhead Tension Connection (2)
  • Plaster (2)
  • Power or Communications and Data (1)
  • PVC Rigid Non-Metallic Conduit Fitting (7)
  • Residential;Home Office (1)
  • Rigid and EMT Conduit;Pipe (3)
  • Rigid and IMC Conduit (3)
  • Rigid and IMC Conduit;Box or Enclosure (4)
  • Rigid Conduit (10)
  • Rigid Conduit and Pipe (1)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (17)
  • Round Floor Box Covers (1)
  • Schedule 40 & 80 Conduit (6)
  • Seals Sections of Conduit Runs from Passage of Vapors;Flame and Gases (1)
  • Single Receptacle (1)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connections;Copper;Aluminum;ASCR Conductor (1)
  • Square Boxes (27)
  • Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit;Armored Cable and Flexible Metal Conduit (1)
  • Standard Conductors (5)
  • Tapping Copper Conductors to Unbroken Main Copper Conductors (1)
  • Temporary Connections to Male Disconnects and Terminal Blocks. (2)
  • Terminate;Splice (2)
  • Tile and Carpet Applications (4)
  • Tile and Carpet Applications;Doors (1)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • Two Single Flush Receptacles (1)
  • TY1CP*6 Wiring Duct Cover (2)
  • TY2CP*6 Wiring Duct Cover (1)
  • Wall Only with Non-Metallic Wiring System (2)
  • Wet Locations (1)
  • Wiring Duct (2)
  • Show More...

• Knockout Size

  

  • 0.755 in (1)
  • 1 in (Side);1 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1 in (Side);3/4 in (Side);1 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom);1 in (Bottom) (1)
  • 1/2 in (31)
  • 1/2 in (Side);1/2 in (End);3/4 in (Bottom);1/2 in (Bottom) (2)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom) (1)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in (Side);3/4 to 33/64 in (Side);1/2 in (End);3/4 to 33/64 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in;3/4 in (10)
  • 1-1/2 in (Side);1-1/2 in (End);2-1/2 in (Bottom) (4)
  • 1-1/4 in (Side);1-1/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 3/4 in (5)
  • 3/4 in (Side);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (4)
  • Show More...

• Connection Size

  

  • 1/2 in (1)
  • 1/2 in - 13 (3)
  • 1/4 in - 20 (2)
  • 3/4 in (1)
  • 3/8 in - 16 (5)
  • 3/8 in - 16 UNC (1)
  • Show More...

• Connection Type

  

  • 90° (1)
  • NPT (11)
  • Straight (22)
  • Threaded (63)
  • UNC (10)
  • Show More...

• Number Of Knockouts

  

  • 1 (3)
  • 10 (3)
  • 11 (2)
  • 13 (5)
  • 16 (4)
  • 17 (4)
  • 2 (1)
  • 20 (1)
  • 22 (1)
  • 24 (1)
  • 3 (6)
  • 4 (13)
  • 5 (3)
  • 6 (5)
  • 7 (5)
  • 8 (2)
  • Show More...

• Mounting Type

  

  • Adjustable Bar Hanger (2)
  • Angled Side Nails (2)
  • Bracket (1)
  • Bracket Mount (1)
  • Captive Nails (1)
  • Compound Angled Nails (1)
  • Ear Flush Mount (2)
  • Ear Mount (4)
  • Horizontal Mount (1)
  • L Bracket (1)
  • Lag Screw Mount (1)
  • Lug Mount (2)
  • Molded Ear #4 Swing Bracket (1)
  • Mounting Ear & Swing Clamp (1)
  • Mounting Ears & (2) Swing Clamps (2)
  • Mounting Ears And Captive Nails (1)
  • Nail and Bracket Support (1)
  • Nail Mount (8)
  • Nail-On (4)
  • Screw Mount (10)
  • Stud Mount (1)
  • Surface Mount (25)
  • Swing Clamps (1)
  • Vertical Mount (17)
  • Wall Mount (1)
  • Wall Mount;Ceiling Mount (49)
  • Show More...

• Length

  

  • 0.75 in (1)
  • 0.75 in;19.05 mm (1)
  • 0.84 (1)
  • 0.85 (1)
  • 0.99 in;25 mm (1)
  • 1 in (1)
  • 1 in;25.4 mm (1)
  • 1,200 ft (1)
  • 1.125 in;28.58 mm (2)
  • 1.17 in (1)
  • 1.275 in;32.39 mm (1)
  • 1.338 in;33.99 mm (6)
  • 1.365 in (1)
  • 1.406 in (1)
  • 1.530 in (2)
  • 1.541 in (1)
  • 1.56 in (1)
  • 1.625 in (2)
  • 1.63 in (2)
  • 1.660 in (2)
  • 1.68 in (1)
  • 1.75 in;44.45 mm (1)
  • 1.79 (2)
  • 1.85 in (1)
  • 1.875 in (1)
  • 1.888 in (1)
  • 1.89 in (1)
  • 1.890 in;48.0 mm (1)
  • 1.91 (1)
  • 1.934 in (1)
  • 1.959 in (1)
  • 10 ft (25)
  • 10.9 (2)
  • 100 ft , 30.48 m (3)
  • 101.6 mm (21)
  • 102 mm (1)
  • 10-5/8 in (1)
  • 11.02 (1)
  • 11.08 in;284.4 mm (2)
  • 11.1 in (1)
  • 11.4 (1)
  • 11.4 in (2)
  • 11.6 (3)
  • 11.62 in;295.1 mm (1)
  • 11.64 mm (1)
  • 11.77 (1)
  • 11.77 in;299 mm (2)
  • 1-1/16 in (1)
  • 1-1/16 in;27 mm (1)
  • 1-1/2 in (1)
  • 1-1/4 (1)
  • 1-1/8 in (2)
  • 1-11/16 in (1)
  • 1-13/32 (2)
  • 1-15/16 in (3)
  • 118.92 (4)
  • 119.063 mm (2)
  • 12.000000000000000 (1)
  • 12.5 ft (1)
  • 120 (17)
  • 1200 (11)
  • 1200.7874 (3)
  • 12000 (1)
  • 12-1/2 in (3)
  • 1-21/32 (1)
  • 1-21/32 in;42.1 mm (3)
  • 1-25/32 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 (6)
  • 1-3/4 in (4)
  • 1-3/8 in (1)
  • 13/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (2)
  • 1-31/32 (1)
  • 14 (2)
  • 14.2 (6)
  • 14.2 in;360.5 mm (2)
  • 14.284 in;362.81 mm (1)
  • 14.287 in;362.9 mm (2)
  • 14.57 (1)
  • 14.655 in;372.24 mm (2)
  • 14.9 (1)
  • 144 (3)
  • 14-4/4 (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/32 in;29.4 mm (1)
  • 1-5/8 (1)
  • 1-5/8 in (4)
  • 16 in;406 mm (1)
  • 17.611 in;447.32 mm (1)
  • 1-7/16 in (1)
  • 1-7/8 in (2)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (3)
  • 18 (1)
  • 18 in;457 mm (2)
  • 1800 (1)
  • 2 in (1)
  • 2.15 (1)
  • 2.250 in (1)
  • 2.3 (2)
  • 2.3 in (1)
  • 2.3 in (Body) (1)
  • 2.374 in (1)
  • 2.500 in (2)
  • 2.6 in (1)
  • 2.625 in (1)
  • 2.875 in (1)
  • 2.9 (1)
  • 2.92 in;74.2 mm (2)
  • 20 ft (3)
  • 20.5 (1)
  • 2-1/2 in (1)
  • 2-1/8 in (2)
  • 2-13/16 in (4)
  • 2-21/32 in (1)
  • 2-23/32 in;69.1 mm (4)
  • 23.611 in;599.72 mm (1)
  • 23.946 in;608.22 mm (1)
  • 2-3/16 in (2)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-3/32 in;53.2 mm (2)
  • 2-3/4 in (3)
  • 2-3/8 (3)
  • 24 in;610 mm (2)
  • 24.3 in;617 mm (1)
  • 24.9 (1)
  • 240 (12)
  • 2400 (1)
  • 2-5/16 in (1)
  • 3 in (15)
  • 3 m (1)
  • 3.060 in (1)
  • 3.187 in (1)
  • 3.406 in (1)
  • 3.44 in (1)
  • 3.55 in;90.17 mm (1)
  • 3.6 (5)
  • 3.62 in;91.95 mm (2)
  • 3.641 in (1)
  • 3.65 (1)
  • 3.65 in;92.7 mm (1)
  • 3.69 in;93.6 mm (2)
  • 3.76 in;95.4 mm (1)
  • 3.8 in;96.5 mm (1)
  • 3.938 in (1)
  • 3.94 in;100.08 mm (2)
  • 3/4 in (1)
  • 30.34 in;770.61 mm (1)
  • 300 (3)
  • 3000 (2)
  • 3-1/2 (3)
  • 3-1/2 in (5)
  • 3-1/2 in;88.9 mm (1)
  • 3-1/4 (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-15/16 in (2)
  • 3-3/4 in (2)
  • 3-3/4 in;95.3 mm (3)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/8 in (2)
  • 36.376 in;923.37 mm (1)
  • 3-7/16 in (1)
  • 3-7/8 in (1)
  • 4 (1)
  • 4 in (15)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (24)
  • 4.01 in;101.8 mm (1)
  • 4.23 in (1)
  • 4.281 in (1)
  • 4.3 in;109.2 m (1)
  • 4.30 in;109.22 mm (1)
  • 4.5 (2)
  • 4.500 in (1)
  • 4.56 in (1)
  • 4.62 in (1)
  • 4.62 in;117.3 mm (1)
  • 4.85 in;123.2 mm (1)
  • 4.958 in (1)
  • 4-1/16 in (1)
  • 4-1/2 (3)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/4 in (1)
  • 4-1/8 in;104.775 mm (1)
  • 4-11/16 in;119.063 mm (6)
  • 4-15/16 in (2)
  • 4-7/16 in (3)
  • 4-9/16 in (2)
  • 5 (1)
  • 5 in (1)
  • 5.395 in (1)
  • 5.4 (6)
  • 5.5 (2)
  • 5.50 in (1)
  • 5.51 in;140 mm (2)
  • 5.66 in;143.7 mm (1)
  • 5.78 in;146.9 mm (1)
  • 5/8 in (1)
  • 5-1/2 in (4)
  • 5-1/2 in;139.7 mm (2)
  • 5-13/16 in;147.6248 mm (1)
  • 5-3/8 (5)
  • 5-3/8 in (2)
  • 5-5/8 in;142.875 mm (1)
  • 5-9/16 in (1)
  • 5-9/32 (1)
  • 598.4252 (1)
  • 6 (2)
  • 6 in (2)
  • 6 in (Base) (1)
  • 6.08 in;154.4 mm (1)
  • 6.38 (1)
  • 6.5 (1)
  • 6.625 (2)
  • 6.625 in (1)
  • 600 (4)
  • 6000 (1)
  • 7 (1)
  • 7.2 (7)
  • 7.31 (1)
  • 7.31 in;185.67 mm (2)
  • 7.31 in;186 mm (1)
  • 7.435 in;188.85 mm (2)
  • 7.46 in;189.5 mm (1)
  • 7.57 in;192.278 mm (1)
  • 7.62 in;193.7 mm (1)
  • 7.625 (2)
  • 7.8 (1)
  • 7.800000000000000 (2)
  • 7.99 (1)
  • 7/8 in (2)
  • 7000 ft (1)
  • 7-1/4 (1)
  • 7-1/4 in (1)
  • 72 (21)
  • 72 in;1828.8 mm (5)
  • 7-3/8 in;193.675 mm (1)
  • 8 (1)
  • 8.1 in;205.70 mm (2)
  • 8.2 (2)
  • 8.35 (1)
  • 8.46 in;215 mm (2)
  • 8-13/16 in (1)
  • 8-5/8 in;219.1 mm (1)
  • 9.94 ft;3.03 m (1)
  • 9000 (3)
  • Strip: 1-1/4 in;Body: 2.530 in (1)
  • Show More...

• Width

  

  • 0.09 (7)
  • 0.09 in;2.29 mm (2)
  • 0.095 in;2.41 mm (2)
  • 0.1 (2)
  • 0.14 (11)
  • 0.14 in;3.56 mm (4)
  • 0.14 in;3.6 mm (6)
  • 0.14 in;3.71 mm (2)
  • 0.18 (3)
  • 0.18 in;4.6 mm (2)
  • 0.180000000000000 (2)
  • 0.184 in;4.67 mm (2)
  • 0.186 in;4.72 mm (1)
  • 0.186 in;4.73 mm (6)
  • 0.19 (13)
  • 0.19 in;4.82 mm (2)
  • 0.27 (5)
  • 0.27 in;7.0 mm (7)
  • 0.273 (1)
  • 0.29 (1)
  • 0.3 (5)
  • 0.30 in;7.62 mm (4)
  • 0.305 (2)
  • 0.31 (1)
  • 0.345 in;8.76 mm (2)
  • 0.5 (2)
  • 0.70 in (1)
  • 0.75 (2)
  • 0.75 in (2)
  • 0.75 in;19.1 mm (1)
  • 0.750000000000000 (1)
  • 0.76 in (1)
  • 0.785 in;19.9 mm (7)
  • 0.81 in (1)
  • 0.94 (1)
  • 0.99 in;25 mm (1)
  • 1 (9)
  • 1 in (1)
  • 1.19 (1)
  • 1.25 in (3)
  • 1.25 in;31.8 mm (3)
  • 1.311 (1)
  • 1.338 in (2)
  • 1.338 in;33.99 mm (3)
  • 1.5 (1)
  • 1.5 in (5)
  • 1.625 in (5)
  • 1.75 (1)
  • 1.788 in;45.4 mm (1)
  • 1.94 in (1)
  • 1/2 in , 12.7 mm (1)
  • 101.6 mm (21)
  • 11.62 in;295.1 mm (1)
  • 1-1/2 (5)
  • 1-1/2 in (1)
  • 1-1/4 in (1)
  • 119.063 mm (2)
  • 12 (5)
  • 12 in (1)
  • 12.7 mm (Dia.);0.5 in (Dia.) (1)
  • 1-3/4 (1)
  • 1-3/4 in (1)
  • 15 (4)
  • 1-5/8 (51)
  • 1-5/8 in (5)
  • 19.05 mm;0.75 in (1)
  • 2 (4)
  • 2 in (14)
  • 2.06 in;52.2 mm (2)
  • 2.11 in;53.594 mm (1)
  • 2.187 (1)
  • 2.25 (1)
  • 2.25 in;57 mm (2)
  • 2.25 in;57.2 mm (3)
  • 2.26 in;57.3 mm (1)
  • 2.30 in;58.4 mm (1)
  • 2.8 in (1)
  • 2.80 in;71.1 mm (1)
  • 2.9 in;73.7 mm (1)
  • 2.92 in;74 mm (1)
  • 2-1/2 in (2)
  • 2-1/2 in;63.5 mm (1)
  • 2-1/32 (1)
  • 2-1/4 in (1)
  • 2-1/4 in;57.15 mm (1)
  • 2-1/8 (1)
  • 2-1/8 in (13)
  • 2-11/16 in;68.2498 mm (1)
  • 2-13/16 in (1)
  • 2-3/8 in (1)
  • 24 (3)
  • 2-5/8 (1)
  • 28.58 mm;1.125 in (3)
  • 3 (6)
  • 3 in (5)
  • 3 in;7.62 cm (2)
  • 3.53 in;89.7 mm (2)
  • 3.56 in;90.424 mm (1)
  • 3.69 in;93.6 mm (2)
  • 3/4 in (1)
  • 3/4 in , 19.05 mm (1)
  • 3-1/2 (1)
  • 3-1/2 in (3)
  • 3-1/8 in;79.375 mm (1)
  • 3-5/8 in;92.075 mm (1)
  • 3-7/16 in (1)
  • 3-7/16 in;87.2998 (1)
  • 4 (5)
  • 4 in (2)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (23)
  • 4.25 inches (2)
  • 4.36 in;110.7 mm (1)
  • 4.38 inches (1)
  • 4.5 in (1)
  • 4.50 inches (1)
  • 4.62 in;117.3 mm (1)
  • 4.625 in;117.48 mm (2)
  • 4.81 inches (1)
  • 4.85 in;123.2 mm (1)
  • 4.86 in (1)
  • 4-1/2 in;114.3 mm (1)
  • 4-11/16 in (2)
  • 4-11/16 in;119.063 mm (6)
  • 4-5/8 in (1)
  • 5.38 inches (1)
  • 5.63 (1)
  • 5.80 in (1)
  • 5-3/8 (1)
  • 5-7/8 in (1)
  • 6 (7)
  • 6 in (Base);3-5/16 (Post) in (1)
  • 6.51 inches (1)
  • 7.51 inches (1)
  • 7/16 (1)
  • 78217250333 (1)
  • 9/16 (1)
  • Show More...

• Number Of Hubs

  

  • 3 (1)
  • 4 (1)
  • Show More...

• Cable Size

  

  • #16 to 10 AWG (1)
  • #6 to #2 AWG (ASCR);#6 to #2 AWG (AAAC);#6 STR to #1 Solid AWG (1)
  • 0.525 to 0.650 in (1)
  • 1 AWG (9)
  • 1/0 AWG (11)
  • 1/0 to 4 AWG (ASCR);1/0 to 4 AWG (AAAC);2/0 STR to 2 Solid AWG (1)
  • 14-10 AWG (1)
  • 2 AWG (16)
  • 2/0 AWG (12)
  • 250 kcmil (7)
  • 3/0 AWG (10)
  • 300 kcmil (1)
  • 350 kcmil (6)
  • 4 AWG (9)
  • 4/0 AWG (12)
  • 4/0 to 2/0 AWG (ASCR);4/0 to 2/0 AWG (AAAC);4/0 to 2/0 STR AWG (1)
  • 400 AWG (1)
  • 400 kcmil (2)
  • 500 kcmil (5)
  • 6 AWG (11)
  • 600 kcmil (6)
  • 700 kcmil (2)
  • 750 kcmil (2)
  • 8 AWG (5)
  • 8-1/0 AWG (1)
  • Rigid: 1 in (1)
  • Rigid: 1-1/4 in (1)
  • Show More...

• Number Of Outlets

  

  • 1 (127)
  • 3 (3)
  • 4 (2)
  • Show More...

• Hub Size

  

  • 0.75 (1)
  • 1 (2)
  • 1 in (1)
  • 1/2 in (4)
  • 1-1/2 (1)
  • 1-1/2 in (1)
  • 1-1/4 in (1)
  • 2 in (1)
  • 2-1/2 in (1)
  • 2-1/2 to 3 (1)
  • 3 (1)
  • 3 in (1)
  • 3/4 (4)
  • 3/4 in (4)
  • 4 in (1)
  • Show More...

• Diameter

  

  • 0.90 in (1)
  • 1 in;25.4 mm (1)
  • 1.27 in (1)
  • 1.40 in;35.6 mm (2)
  • 1.46 in (2)
  • 1.48 in (2)
  • 1.5 in;37.5 mm (1)
  • 1.57 in (1)
  • 1.630 in;41.40 mm (1)
  • 1.71 in;43.4 mm (1)
  • 1.74 in (1)
  • 1.76 in (2)
  • 1/2 in (1)
  • 1/4 in (1)
  • 101.6 mm (2)
  • 11/16 in;27 mm (1)
  • 1-1/2 in (1)
  • 1-1/8 in (2)
  • 1-11/16 in;42.9 mm (2)
  • 1-11/32 in (1)
  • 1-13/32 in (2)
  • 1-13/32 in (Hole) (1)
  • 1-17/32 in;44.45 mm (1)
  • 1-19/35 in (Hole) (1)
  • 1-21/32 in;42.1 mm (4)
  • 1-29/32 in;48.42 mm (1)
  • 1-3/8 in (4)
  • 1-3/8 in;34.9 mm (5)
  • 15/16 in;23.8 mm (1)
  • 15/16 in;33.3 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/8 in (1)
  • 1-7/16 in (2)
  • 1-7/32 in (2)
  • 1-7/32 in;30.96 mm (1)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (5)
  • 2 in (1)
  • 2 in;50.80 mm (1)
  • 2.10 in (1)
  • 2.440 in;61.98 mm (1)
  • 2-23/32 in (1)
  • 2-23/32 in;69.1 mm (3)
  • 23/16 in;55.6 mm (1)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-3/4 in (1)
  • 2-3/8 in (1)
  • 2-5/16 in (1)
  • 25/32 in (Hole) (1)
  • 3 in;76.2 mm (1)
  • 3/4 in (1)
  • 30.96 mm (1)
  • 3-1/2 (2)
  • 3-1/4 in (2)
  • 3-1/4 in;82.55 mm (1)
  • 31/4 in;82.6 mm (1)
  • 3-1/4 in;82.6 mm (5)
  • 31/8 in;79.4 mm (1)
  • 3-1/8 in;79.4 mm (1)
  • 3-15/16 in (1)
  • 3-3/4 in (1)
  • 3-3/8 in;85.7 mm (1)
  • 4 (2)
  • 4 in (2)
  • 4 in;101.6 mm (18)
  • 4.38 in;111.2 mm (1)
  • 4.93 in (1)
  • 4-1/2 in;114.3 mm (1)
  • 4-3/8 in (1)
  • 5.11 in (1)
  • 5.50 in (1)
  • 5.69 in (4)
  • 5-1/2 in (1)
  • 5-1/2 in;139.7 mm (1)
  • Show More...

• Height

  

  • 0.238 in;6.1 mm (3)
  • 0.25 in;6.4 mm (1)
  • 0.358 in (2)
  • 0.358 in;9.1 mm (4)
  • 0.465 in;11.81 mm (2)
  • 0.55 in;13.97 mm (1)
  • 0.559 in;14.2 mm (1)
  • 0.673 in;17.1 mm (2)
  • 1.025 in;27.7 mm (1)
  • 1.250 in (2)
  • 1.30 in;35.3 mm (1)
  • 1.5 in (1)
  • 1.6 in (1)
  • 1.6 in;40.5 mm (1)
  • 1.81 in;45.97 mm (1)
  • 1.98 in (1)
  • 1/2 in (3)
  • 1/2 in;12.7 mm (13)
  • 1-1/2 in (3)
  • 1-1/2 in;38.1 mm (15)
  • 1-1/2;38.1 mm (1)
  • 1-1/4 in (1)
  • 1-13/16 in (1)
  • 1-15/16 in (2)
  • 1-19/32 in (1)
  • 12.7 mm (1)
  • 13/16 in (5)
  • 1-5/8 in (18)
  • 1-5/8 in;41.3 mm (1)
  • 1-7/8 in (4)
  • 1-9/16 in (1)
  • 2 in (2)
  • 2 in;50.8 mm (1)
  • 2.014 in;52.8 mm (1)
  • 2.12 in (1)
  • 2.185 in (1)
  • 2.19 in;53.3 mm (1)
  • 2.30 in;58.4 mm (1)
  • 2.4 in;61 mm (1)
  • 2.42 in;61.5 mm (1)
  • 2.420 in;61.47 mm (2)
  • 2.49 in (1)
  • 2.55 in;64.9 mm (1)
  • 2.63 (1)
  • 2.7 in;68.6 mm (1)
  • 2.74 in;69.5 mm (1)
  • 2.74 in;69.7 mm (1)
  • 2.78 in;70.7 mm (1)
  • 2.81 (1)
  • 2.83 in;71.8 mm (1)
  • 2.89 in (1)
  • 2.98 in;75.6 mm (2)
  • 2-1/16 in (1)
  • 2-1/2 in (8)
  • 2-1/4 in (7)
  • 21/64 (1)
  • 2-1/8 in (4)
  • 2-1/8 in;53.975 mm (6)
  • 2-1/8;53.975 mm (4)
  • 2-11/16 in;68.2498 (1)
  • 2-15/16 in (1)
  • 2-23/32 in (1)
  • 2-3/4 in (4)
  • 2-5/16 in;74.5998 mm (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (2)
  • 3.04 in;77.2 mm (1)
  • 3.18 in;80.6 mm (1)
  • 3.26 in;82.9 mm (1)
  • 3.32 in;84.3 mm (1)
  • 3.45 in;87.7 mm (1)
  • 3.5 in (3)
  • 3.5 in;88.9 mm (1)
  • 3.50 in;88.9 mm (1)
  • 3.59 in;91.2 mm (1)
  • 3.69 in;93.7 mm (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 3-1/2 (4)
  • 3-1/2 in (6)
  • 3-1/2 in (Post) (1)
  • 3-1/4 in;8.25 cm (2)
  • 3-11/16 in;93.6498 mm (1)
  • 3-3/4 in (3)
  • 3-3/4 in;95.25 mm (1)
  • 3-5/8 in;92.075 mm (2)
  • 3-9/16 in (1)
  • 4 (3)
  • 4 in (1)
  • 4 in;101.6 mm (1)
  • 4-1/8 in (2)
  • 5.40 in (1)
  • 6.00 in;152.4 mm (1)
  • 7/32 (1)
  • Show More...

• Number Of Holes

  

  • 0 (13)
  • 1 (95)
  • 12 (1)
  • 2 (55)
  • 3 (7)
  • 4 (12)
  • 5 (2)
  • 9 (1)
  • Show More...

• Sub Brand

  

  • ABB (60)
  • Blackburn (74)
  • Carlon (12)
  • Carlon(R) (38)
  • Color-Keyed (48)
  • E-Z-CODE ID (5)
  • Kindorf(R) (16)
  • Ocal (1)
  • Red Dot (1)
  • Shrink-Kon (1)
  • Shureseal(TM) (11)
  • Snap Guard(R) (1)
  • Spec-Kon (4)
  • Sta-Kon (35)
  • Star Teck(R) (1)
  • Steel City (38)
  • Steel City(R) (65)
  • Superstrut(R) (71)
  • T&B (6)
  • Thomas & Betts (1)
  • Ty-Rap (6)
  • Show More...

• Special Features

  

  • (2) Nails Included (1)
  • 100% non-metallic construction, including hinges (1)
  • 24 inches radius (2)
  • 7.5 cu.in Capacity (1)
  • 90 degree angle (8)
  • A Rugged Polycarbonate Construction to Withstand Extreme Temperatures;(2) 6-20 x 1-1/2 in Pan Head Screw;Swing Clamp Included (1)
  • Accepts all standard device covers and tile rings and is available in all box sizes and conduit styles (3)
  • Accepts wire sizes: 12/14,11/12, 10/10 (1)
  • Accepts wire sizes: 23/14, 20/12, 18/10 (1)
  • Accommodates #12 and #14 copper and #12 aluminum solid conduction in non-metallic sheathed cable (1)
  • Accommodates 1/2 in Through 4 In. EMT or Rigid Conduit (3)
  • Accommodates 1/2 in. through 4 in. EMT or rigid conduit (8)
  • Accommodates 1/2 inch or 3/4 inch threaded fixture pipes (1)
  • Accommodates any degree of bend, ideal for shallow trenches (3)
  • Activation kit includes components to accommodate all standard power, data and communications devices plus a divider to separate power from data and communications (1)
  • Adjustable Indent Style Crimp, No Dies Required, Shure-Stake Ratchet (1)
  • All Sizes Take Standard Covers and Accessories or Devices (5)
  • All Springs shall Mechanically Attached to Channel Nut (6)
  • Alloy A380 aluminum, certified zinc alloy and stainless steel springs provide increased corrosion resistance (4)
  • Assembly includes steel clamp with bolt/locknut and cushion (5)
  • Assembly Includes Steel Clamp With Bolt/Locknut and Cushion;To Secure Pipes, Tubes and Hoses For Fluid Conductors;Candle Temperature from -40 to +300°F (1)
  • Attaches 4 in and 4-11/16 Inch Electrical Boxes to Metal Stud;Support Leg Can Be Attached to Stud to Eliminate Movement of Box in Wall;Attaches to Metal or Wood Stud Using Self-Tapping Screws and Screw Gun or Nails (1)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper alloy pressure bar (1)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (6)
  • Bolt and Pressure Bar of Copper Alloy, Completely Tin Plated for Corrosion Resistance;Contoured Spacer of Electrolytic Copper (1)
  • Bolt head is combination slot and hex head for flexibility of attachment (45)
  • Can be used with both Steel and Wood Stud;Speeds Installation Time (12)
  • Capacity: 3/4 in. hub for power wiring and 1-1/4 in. hub for communications cabling, plugs are included (1)
  • Cast Of High-Strength Corrosion-Resistant Copper Alloy. UL Listed For Direct Burial. (2)
  • Castings and bolts of high-strength copper alloy. Removable cap (1)
  • Castings of high-strength, corrosion-resistant copper alloy. Bolt features square shank to prevent turning and enable clamp to be tightened with a single wrench (2)
  • Catalog numbers ending with the suffix X indicate an expanded insulation grip. This means a wider wire entry to accommodate heavy wall insulation. Ring terminals Won't fall free even if the mounting screw loosens (3)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Claws provide temporary support for proper positioning until permanently installed (3)
  • Clean cover edges help provide good gasket sealing (1)
  • Clips to plaster, drywall, concrete block, brick or concrete (1)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (5)
  • Color-Coded Thread Protectors (4)
  • Color-Coded Thread Protectors for Easy Identification of Conduit Size (5)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Concrete Tight (10)
  • Concrete tight when taped (4)
  • Concrete tight, fully adjustable with electro galvanized body and hardware (2)
  • Concrete-Tight;Raintight (34)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Prefilled with Oxide Inhibitor to prevent oxidation and keep out moisture. All Splices are color coded and marked with strip lengths, installation die codes and compression locations, providing easy identification for easy installation (11)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (7)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Contains fine zinc particles which break through the oxide film on cable strands upon compression of connection (1)
  • Continuous Thread (3)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (53)
  • Copper-free aluminum and stainless steel screws provide increased corrosion resistance (1)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (24)
  • Designed to Fit Each Size of Conduit Snugly (7)
  • Designed to meet UL 360 ID/OD dimension requirements (4)
  • Detectable by metal detectors, X-ray equipment, or visual detection (6)
  • Die Cast Construction and Industrial Design Combine to Product a Rugged Protective Enclosure for Devices (2)
  • Drawn Style Box (1)
  • Drop wire may be cut to exact length for adjustments in drop wire sag. Can be attached to bare neutral at any point in the span. Flexible and rigid bails grip ACSR, AAC and AAAC Conductors (3)
  • Dual voltage capability (1)
  • Dual Voltage Capability;Accepts a Two Gang Faceplate;Backless Design Accommodates Large/Deep Low Voltage Devices;Eliminates Cutting the Backs off Electrical Boxes;Accommodates Bend Radius Requirements for Low Voltage Cabling;Provides Ample Space for Insta (1)
  • Easier Installation, Greater Performance and Lower Installation Cost (2)
  • Easier Installation;Greater Performance and Lower Installation Cost (16)
  • Easy Entry Copper Insulation Sleeve (7)
  • Easy Installation - no special tools required (8)
  • Easy Installation;No Special Tools Required (21)
  • Easy to install (2)
  • Easy to install, quick connect (2)
  • Easy to Install;Quick Connect (3)
  • Easy to Install;Quick Connect with Bracket (1)
  • Efficient Design Requires Less Crimping Force;Full Length Tab Makes Installation Easy;Installs with Standard Compression Tools and Dies. Rus Accepted (1)
  • Eliminate Conduit Threading (10)
  • Eliminates errors in premounting the base with respect to its orientation to wire bundle direction (5)
  • Enables quick and convenient bundling of data and fiber optic cables (1)
  • Especially Suited for use with Flexible Metallic Conduit (14)
  • Excellent corrosion reisistance (13)
  • Excellent Corrosion Resistance (16)
  • Excellent for connecting copper or copper-clad steel grounding conductor to ground rod or pipe. Specially designed spacer provides proper alignment between cable and elctrode and affords more positive contact area (13)
  • Excellent For Connecting Copper or Copper-Clad Steel Grounding Conductor to Ground Rod or Pipe. Specially Designed Spacer Provides Proper Alignment Between Cable and Elctrode and Affords More Positive Contact Area. (2)
  • Excellent Pullout Strength;Robust Metallic Construction (1)
  • Exclusive molded in mid-point indicator on the piston (3)
  • Expanded Entry. Brazed Seams (Yellow - Tubular). Internal Barrel Serrations (2)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • Extended Range with Superior Strain Relief;Reduced Overall Size, Fits Into tighter Spaces;Gland Nut Designed to Restrict Cable Bending (2)
  • Extra Strong and Flexible to Withstand Repetitive Motions (1)
  • E-Z-Ground&reg, connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (3)
  • E-Z-Ground&Reg;Connectors are Designed for Direct Burial and Offer a Safe, Efficient Alternative to Exothermic Welding Products (1)
  • E-Z-Ground® connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (7)
  • Factory Provided Raised Ground Screw Location (7)
  • Fast, snap-together assembly offers maximum labor savings. Not need for nuts, bolts and washers or insulating tape - simply slide on reusable boot (3)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (10)
  • Flame-retardant, cross-linked polyolefin (2)
  • Flame-Retardant;Cross-Linked Polyolefin (1)
  • For aluminum and copper concentric conductors and compact code aluminum strandings (12)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications (insulated conductor only). Performs as splice or tab for non-tension applications up to 600 volts, depending on size of connector (3)
  • For easily installed, permanent terminations of solid, round, or stranded nichrome wires as used in toasters, heaters, etc (1)
  • For Easy Reliable Sealing Of Motor Disconnect Boots;For Disconnect Series MD-M and MD-F (1)
  • Four knockout type socket openings, 90 degree spacing (2)
  • Free Fitting Threads Ensure Easy Assembly (4)
  • Fully Insulated. Metal Insulation Sleeve. Molded Insulator. Internal Barrel Serrations. Funnel Entry. (2)
  • Fully threaded globes prevent cross threading assuring a tight seal. (3)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Funneled Barrel Entry;Deep Internal Serrations;Brazed or Overlapping Seams. (1)
  • Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws (5)
  • Galv Krom finish which out performs other finishes (1)
  • Gasketed for a watertight seal (3)
  • Grounding Bushings & Accessories (2)
  • Hardened Steel, Malleable Iron, Copper-Free Aluminum Construction (4)
  • Hardware Included with Box;Made of Steel, Drawn Construction (1)
  • Helps prevent mistakes and trial and error searching during electrical service work (3)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (15)
  • Hexagonal/Splined Body And Locknut Enables Fast And Easy Installation;Corrosion Resistant (1)
  • High clamps (2)
  • High clamps and #40 ground strap (1)
  • High Impact Resistant (4)
  • High impact resistant thermoplastic (2)
  • High Performance, Dual Rated Connectors (1)
  • High-strength polycarbonate construction will not shatter when cold (1)
  • Holes between gangs are spaced on 1-3/16 inch centers (3)
  • Hubs & Accessories (8)
  • Ideal for providing a main chase from the main distribution panel to a secondary hub in the attic or basement (1)
  • In butt splices, the wires are butted together and crimped at each end of the splice. These splices are color-coded according to wire size (5)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Included adapter plates offer 12 installation options with 1-gang cover and 25 installation options with 2-gang cover (1)
  • Includes captivated Phillips head screws (7)
  • Includes pouch of sealing compound with customizable nozzle and damming fiber (1)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (4)
  • Integrated carpet plate and duplex floor plate in one unit (2)
  • Kindorf Self Aligning Channel Nuts are Designed to Provide Resistance to Pull Out and Resistance to Side Slip in Excess of the Full Strength of the Channels with Which They are Used (3)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (8)
  • Kit includes box, cover, duplex receptacle, new and old work brackets, green ground screw and mounting hardware (1)
  • Kit includes box, cover, duplex receptacle, new and old work brackets, sealant and mounting hardware (1)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Largest Wire Fill Capacity in their Class (3)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (22)
  • Long Barrel;High Conductivity (14)
  • Long-Lasting Durability (1)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (53)
  • Made of 1350 Aluminum Alloy for high strength and high conductivity. Standard Compression tools and dies install all sizes - no special tools needed. Field-proven ribbed design enables excellent connector/conductor contact without distorting the conductor's shape. Fold-in tabs provide tab interlock as tool closes. Prefilled with oxide inhibitor held captive in the rib/connection area (2)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of high-conductivity seamless copper tubing. Tin plated for corrosion resistance (16)
  • Made of Steel (21)
  • Made of Steel, Welded Construction (9)
  • Made of Steel. Drawn Construction (13)
  • Made of Steel;Includes CV Bracket (1)
  • Maximum Flexibility In Tight Applications (5)
  • Meets Coast Guard CG293 (9)
  • Minimum of Five Full Threads;Integral Bushing (1)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (19)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations. (1)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • More economical than other taps and split bolts in terms of purchase, inventory, installation time, insulation and maintenance (1)
  • Mounts all types of wall material up to 1-1/2 inch maximum thickness (1)
  • NG boxes have 1/2 Inch offset wallboard flange and V-type cable entry. (1)
  • No Metal Core to Fatigue from Flexing or Vibration (6)
  • Non-Corrosive (1)
  • Non-Metallic Clamps Offer the Same Chemical Resistance as Carlon Non-Metallic Conduits for a Complete, Corrosion Resistant System (4)
  • Non-water soluble, non-petroleum based polymer grease (1)
  • Nylon insulated splices meet or exceed the requirements of MIL-T-7928. These splices are color-coded according to wire size (3)
  • One size fits all strut depths (3)
  • One-piece molding - no lost parts (2)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (8)
  • One-step installation method, no glue required (2)
  • Open-backed to easily accommodate the bend radiuses required for low voltage cabling and deep devices such as volume controls (1)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • Paintable surface with textured finish to hid scratches (8)
  • Patented Design Allows for Adjustment from 0 in to 1-3/4 in After Installation (1)
  • Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation (5)
  • Patent-pending design, rugged steel construction similar to standard mud ring but with greater flexibility (2)
  • Perfect for coaxial, fiber optic and all other communication and electrical conducting cables (2)
  • Perfect for protection of bundles from .062 to 7 inch diameters (1)
  • Perfect for protection of bundles from .063 to 7 inch diameters (3)
  • Perfect for wire and cable. Print heat-shrink sleeves on the spot (3)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Polycarbonate design for superior impact strength. 8 tabs for strong pull out resistance and low insertion force. Concrete tight design not requiring taping or PVC cement when used with Carlon ENT. Rotates freely, prevents kinks (5)
  • Positive, All-Around Compression with Low Resistance and High Pull-Out Values (3)
  • Powergrip Grounding Ring;Built-in Sealing Device;Gland Nut Can be Tightened with Hammer and Screwdriver (1)
  • Pre-insulated for fast, easy installation of large home or commercial service entrances. Concave polyethylene end caps seal out dirt, but are easily pierced when inserting conductor (6)
  • PVC construction for easier installation, greater performance and lower installation cost (5)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • PVC repair fittings are listed in accordance with the NEC and Section 352.6 (2)
  • Quick Connect Couplings and Threaded Adapters are Concrete-Tight When Used with Carlon ENT (5)
  • Quick, reliable method of connection to terminal blocks and boards without the use of tools. Unique construction of the female disconnect offers long-term dependability (2)
  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT (5)
  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT. (7)
  • Redesigned to Custom Fit Both 1-1/2 In. and 1-5/8 In. Channels (6)
  • Re-enterable motor stub insulator (1)
  • Residential floor box kit that includes a Steel City switch box, cover flange and receptacle (1)
  • Resistant to corrosion and preserve the electrical integrity of the wires in single or multiple strands. Feature an intelligent constructable part number for quick identification of the wire range (1)
  • Resists flexing and holds their shape even in the worst applications (4)
  • Round Blank Weatherproof Cover, 5 Inch Diameter, 3-1/2 Inch Mounting Holes on Center (1)
  • Rubber Insulation. PVC Boot and Locking Insulator. Oxide Inhibitor (1)
  • Safety Factor = 4 (2)
  • Screws concealed under doors (6)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (10)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Self Sticking Safety Signs have a 5 to 8 year Durability (2)
  • Self-insulated with heat-shrinkable polyolefin and internally coated sealant. Upon completed installation, a fully sealed connection is achieved to protect the joint against the degrading effects of galvanic action, corrosion, and environmental exposure (2)
  • Self-Insulated With Heat-Shrinkable Polyolefin and Internally Coated Sealant. Upon Completed Installation;A Fully Sealed Connection Is Achieved to Protect The Joint Against The Degrading Effects Of Galvanic Action;Corrosion;and Environmental Exposure. (1)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Shure-Stake Ratchet, Color-coded Die Nests, Die Code Embossment (1)
  • Side dovetail rail and groove design allows for side by side interchangeability of conduit spacer sizes while maintaining horizontal stability. Locking keyways incorporated into intermediate spacers eliminate the need for costly top spacers in each size. They provide for the use of a beaded strap that helps secure the top section of conduit. 1 and 2 inches Snap Loc reducers allow fixturing of 1 or 2 inches conduit inside larger spacers. The Snap Loc rebar holder helps provide stabilization on large banks o (8)
  • SilverGalv finish will not chip or peel (1)
  • Single Gang Weatherproof Receptacle Cover (1)
  • Snap secures Snap-Loc Reducer onto Snap-Loc and Snap-N-Stac Spacers, Clip secures conduit to Snap-Loc Reducer, 1 inch Reducer is compatible with all spacer sizes, 2 inches Reducer is compatible with all spacer sizes 3 inches and larger (1)
  • Snap-In (3)
  • Splices large conductors required for commercial service, use as low cost reducing sleeve. All sizes can be installed with popular mechanical and hydraulic tools. Center stop assures proper conductor positioning. Quick identifications with color-coded foil caps (12)
  • Splices Large Conductors Required for Commercial Service;Use as Low Cost Reducing Sleeve;All Sizes can be Installed with Popular Mechanical and Hydraulic Tools;Center Stop Assures Proper Conductor Positioning;Quick Identifications With Color-Coded Foil Caps (3)
  • Standard Barrel;High Conductivity (18)
  • Sturdy Cable Sealing Mechanism Which Results in Superior Strain Relief (1)
  • Superblue Boxes Combine the Features of the Hard Shell Thermoset Box and the Thermoplastic PVC Style Box to Create a New Rigid Non-Metallic Wiring Box (2)
  • Supports threaded rod, threaded brindle rings and electrical boxes (2)
  • Switch on when Hinged Door Open (1)
  • Tapered NPT Threads and Integral Bushings to Protect Wire Insulation (2)
  • T-Box Uses 6-32 x 3/4 in Screw (1)
  • The first non-metallic junction box UL Listed with a NEMA 6P rating per Section 314, exception of the National Electrical Code (4)
  • The Maximum Number of Support and Framing Applications can be Constructed with a Minimum Amount of Labor and Pieces (25)
  • The most recent design allows an easy and quick adjustment for a perfect installation. Adjustment screws are accessible after device is in place for easy fine tuning (2)
  • The Smooth Inner Surface Ensures that Cables and Conductors Can Be Fed Through Very Easily (4)
  • Thermoplastic Insulating Throat with Rating up to 105 Degree Celsius (7)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (7)
  • These non-insulated fork terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (1)
  • These Non-Insulated Fork Terminals are Made Of Electrolytic Copper For High Conductivity. They Can Be Installed With Crimping Tools Having a Single Indentor or Double Indentor (recommended For Solid Wire). Serrated Barrel Increases Grip On Wire. (1)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire) (2)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (14)
  • These Non-Insulated Ring Terminals are Made of Electrolytic Copper for High Conductivity;They can be Installed with Crimping Tools Having a Single Indentor or Double Indentor;Serrated Barrel Increases Grip on Wire (1)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (13)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • This mounting base provides a saddle for the wire run. Ty-Rap tie is threaded under bundle and tied in a usual manner (1)
  • Thread Protector Cap (1)
  • Three Piece (2)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Three way power, data, and communications plus easy double or triple ganging (1)
  • Three way versatility for power, data, and communications (1)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (25)
  • UL Listed and is available with tape pre-installed (3)
  • UL Listed Type 4X and NEMA 4X Rating for Excellent Protection In Wash Down Areas, As Well As Harsh Outdoor Environments Exposed to Moisture, Rain, Ice or Snow (2)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (12)
  • Unique Construction Of The Female Disconnect Offers Long-Term Dependability. Brazed Seam Serrated Barrel Provides Maximum Tensile Strength. (3)
  • Unique cover provides aesthetic recessed service (3)
  • Unique, homogenized blend of pure, polished colloidal copper, rust and corrosion inhibitors (1)
  • Uniquely designed pressure bar and notched v-bottom collar provide vise-like grip between conductor and terminal (3)
  • Weather-resistant nylon mounting base for use with lashing ties Cat. No. Ty-5409 (0.5 wide) (1)
  • Wires are laid side by side in the connector, and the splice connection is complete in one crimp (1)
  • Show More...

• Includes

  

  • Captivated Phillips Head Screws (6)
  • Cover and Gasket (2)
  • Show More...

• Application

  

  • 1.000 2.000 (1)
  • 100.000 1000.000 (1)
  • 15.000 25.000 (1)
  • A Fitting for Connecting a Junction Box to a Conduit System (7)
  • Above Ground Application (1)
  • Act As Pull Outlets for Conductors Being Installed (2)
  • Act as Pull Outlets, Provide Access to Conductors for Maintenance and Future System Changes (1)
  • Adapts Non-Metallic Conduit to All Electrical Enclosures by Inserting Adapter Through Knockout and Cementing into Carlon Couplings (1)
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement (1)
  • Applications certified to 600 V and recommended up to 35 kV¥ (25)
  • Approved for connecting bonding jumper from receptacle to grounded metal device box (1)
  • Approved for indoor and outdoor applications (1)
  • Armored Cable and Flexible Metal Conduit (1)
  • Armored/Metal Clad Cable (1)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (8)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Cable ties are primarily used to cinch wires and cables together to form a neat and organized bundle (12)
  • Can Be Installed in The Same Stud Cavity of a Shared Two-Hour Wall (1)
  • Can be installed in the same stud cavity of a shared two-hour wall. (1)
  • Carlon Junction Box Offers All the Corrosion Resistance and Physical Properties Needed For Direct Burial (1)
  • Carlon junction box offers all the corrosion resistance and physical properties needed for direct burial applications (3)
  • Concrete Box Cover Plate (1)
  • Concrete-Encased, Direct-Burial Note: Purchaser is responsible for installation design and determination of the appropriateness of the product for any specific application (8)
  • Conduit (45)
  • Conduit;Non-Metallic Sheathed Cable (1)
  • Connect Conduit Sections, Provide Easy Access to Conductors for Maintenance and Future System Changes (2)
  • Connects Two Different Sizes of Conduit Together or is Used to Replace a Coupling and Reducer in an Installation (1)
  • Corrosion Protection for Electrical Systems (5)
  • Crimping Lugs/Taps (3)
  • Crimping terminals/splices/disconnects (2)
  • Damp Location (2)
  • Dead-End Self-supporting Drop Wire (3)
  • Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (29)
  • Designed and listed for use with non-metallic sheathed cable in accordance with Artile 314 of the National Electrical Code (1)
  • Designed to allow selective ENT openings - 1/2 in., 3/4 in., and 1 in. - based on application needs (1)
  • Designed to compensate for length changes due to temperature variations in exposed conduit runs (3)
  • Designed to lock into place for easy alignment and installation (1)
  • Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations (2)
  • Dry-tite boxes and covers protect wiring devices, switches, electronic components, and terminal block in Dry, Damp and Wet Locations (1)
  • Dry-Tite Boxes and Covers Protect Wiring Devices,Switches, Electronic Components, and Terminal Block in Dry, Damp and Wet Locations (1)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components;Terminal Blocks in Dry;Damp and Wet Locations (2)
  • Dual-Rated Connector (1)
  • Electrical (10)
  • Electrical and Mechanical Connections (2)
  • Female Reducer to Connect Two Different Sizes of Rigid/IMC Conduit (1)
  • Flex-Plus Blue ENT is a Non-Metallic Flexible Raceway for Use in Walls, Floors and Non-Plenum Ceilings (7)
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings (5)
  • For 4-wire twist-lock single flush receptacle (1)
  • For cable tray (1)
  • For casting into concrete walls, floors or ceilings to provide for attachment anywhere along the continuous slot (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (11)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (15)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors. Use as a low tension reducing sleeve for Insulated Conductor (6)
  • For conduits and cables (2)
  • For Connections and Strain Relief in Cramped Spaces (1)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (13)
  • For Copper to Copper Connections;For Grounding Of Steel Structures or Transformers Using One or Two Cables;For Tapping One or Two Cables From Bus Bar. (2)
  • For dead-end terminations (2)
  • For flat applications (1)
  • For hanging rod (3)
  • For Hazardous Locations (1)
  • For high temperature applications over 105 degree C (2)
  • For Mounting Pipe or Conduit Parallel to the Beam (1)
  • For multiple through circuit terminations or where additional support is required in stub-up applications (1)
  • For repairing broken PVC conduit a.k.a stub-ups in concrete slabs (2)
  • For single receptacle (1)
  • For Standard Conductor Splice (12)
  • For tile and carpet applications (10)
  • For use in fire alarm systems (1)
  • For use in metal framing applications (16)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use on aluminum conductors (6)
  • For use on copper conductors (1)
  • For use with #3330-30A 250 V twist-lock receptacle (1)
  • For use with 3/8 inch, 1/2 inch & 5/8 inch wall board and plaster (3)
  • For use with 4 in. square and 4-11/16 in. boxes, 1-1/2 in. and 2-1/8 in. deep (1)
  • For use with 4 inch and 4-11/16 inch boxes (1)
  • For use with 4 inch square boxes (1)
  • For use with 61W, 62W, 640P, 640, 840 and 740 series floor boxes (3)
  • For use with 640 and 840 series floor boxes (1)
  • For use with 640 P and 740 series floor boxes (1)
  • For use with 664 SC and 664 CI floor boxes (2)
  • For use with 68 and 600 series floor boxes (4)
  • For use with 68 P floor box (6)
  • For use with 68 P round floor box (5)
  • For use with A and C series channel and inserts (7)
  • For use with a two device square cut tile wall cover, 1/2 inch, 3/4 inch or 1 inch raised (1)
  • For use with A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (2)
  • For use with A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • For use with all A and C series channels (1)
  • For use with all Kindorf channels (4)
  • For use with armored/metal clad cable (3)
  • For use with B series channel and inserts (1)
  • For use with Carflex conduit and Carflex X-Flex conduit (6)
  • For use with channel and channel fittings (3)
  • For use with conduit (20)
  • For use with conduit or pipe (5)
  • For use with drywall (3)
  • For use with E976RFB floor box (1)
  • For use with EMT and Rigid conduit or pipe (11)
  • For use with EMT conduit (41)
  • For use with Kindorf channels (1)
  • For use with non-metallic cable (8)
  • For use with non-metallic sheathed cable (6)
  • For use with non-metallic sheathed cable and flexible cord (1)
  • For use with non-metallic wiring systems only (1)
  • For use with one 30 or 50 Amp dryer or range receptacle (2)
  • For use with one 4-wire twist-lock single receptacle (2)
  • For use with one duplex flush receptacle (2)
  • For use with one ground fault receptacle (1)
  • For use with one ground fault receptacle and one duplex receptacle (1)
  • For use with one ground fault receptacle and one toggle switch (1)
  • For use with one single and one duplex flush receptacle (1)
  • For use with one single flush receptacle (2)
  • For use with one toggle switch (2)
  • For use with one toggle switch and one duplex flush receptacle (1)
  • For use with one toggle switch and one single receptacle (1)
  • For use with receptacle NBR 7112, 30 amp, 3 wire, and NBR 9430, 30 or 50 amp, 4 wire (1)
  • For use with Rigid Conduit (2)
  • For use with Rigid Conduit and Pipe (7)
  • For use with rigid/IMC conduit (23)
  • For Use with Rigid/IMC Conduits (11)
  • For use with rigid/IMC or EMT conduits (2)
  • For use with round and octagon boxes (3)
  • For use with round boxes (1)
  • For use with round floor box covers (1)
  • For use with Schedule 40 and 80 Conduit (5)
  • For use with Schedule 40 and 80 PVC (1)
  • For Use with Series A & B Conduit Body (1)
  • For use with square boxes (1)
  • For use with the conduits (3)
  • For use with two duplex flush receptacles (2)
  • For use with two ground fault receptacles (1)
  • For use with two single flush receptacles (1)
  • For use with two toggle switches (1)
  • Grounds trailer frames, cable trays, CATV and telephone pedestals (1)
  • Hanging Rod (1)
  • Hardened Points Bite Into Beam Flange;Fits All I-Beams Where Edge of Beam Flange Does Not Exceed 0.8 In. Thickness (1)
  • Hazardous Location (2)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • Ideal for great rooms and home offices (1)
  • Ideal for in-line splicing applications (1)
  • Ideal for residential and home office applications (1)
  • Ideal for residential and home office applications (1)
  • Ideal for the modern office with workstations that have power, communications and data equipment (2)
  • Ideal for use in residential market in wood floor applications (1)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Ideal solution for constructions where drywall depth often varies (2)
  • Ideally Suited for Continuous Flexing Applications or Vibration (6)
  • Indoor;Outdoor (3)
  • Industrial;Commercial;Used where liquid-tight flexible metallic raceway is installed in outdoor or indoor locations, and exposed to continuous or intermittent moisture;Used to positively bond flexible liquid-tight flexible metallic conduit to boxes or enclosures;Typical applications include raceway for general purpose industrial and commercial construction, Machine OEMs, panel builders, indoor and outdoor installations;Liquid-tight applications against water, oils, cutting fluids, mild acids;For use in ele (1)
  • Installs lugs and splices Series 54000 and 58000 (1)
  • Insulate motor lead disconnects (1)
  • Insulate motor stub splices quickly and dependably (1)
  • Junction for Branch Conduits In Hazardous Locations (1)
  • Kindrof(R) Modular Metal Framing System (2)
  • Listed for Fan Support Up to 35 Lbs and Fixture Support Up to 50 Lbs (1)
  • Listed for fixture support up to 35 lbs (1)
  • Listed for masonry walls (5)
  • Listed for wall fixture support up to 10 lbs (2)
  • Low maintenance indoor/outdoor lighting where moisture, dirt, dust, corrosion and rough service are problems. (2)
  • Machine Tools, Motor Hookups, Food Processing Equipment, Extensions from Wire Ways, and Sensor and Micro Switch Wiring Found In Control Consoles (4)
  • Metal Framing (20)
  • Multiple Dead-End Circuit Terminations or Where Additional Support is Required in Stub-Up (1)
  • N (1)
  • Non-metallic box feature a rugged polycarbonate construction to withstand extreme temperatures (2)
  • Non-metallic boxes feature a rugged polycarbonate construction to withstand extreme temperatures. (1)
  • Non-Metallic Sheathed Cable (9)
  • Non-Metallic Wiring Systems Only (1)
  • Octagon Boxes (3)
  • Old Work (1)
  • Old Work Application (1)
  • Outdoor (2)
  • Outside firewalls in hotel, casino and residential high-rise structures, ceramic tile walls and any other application in which a stud-mounted box and mud ring may require depth adjustment prior to final trim work (2)
  • Overhead Tension Connection (2)
  • Passing Jacketed Metal Clad Cables Through a Bulkhead or enclosure in Industrial Hazardous Location (1)
  • Perfect solution for tile, paneling or stucco (1)
  • Petrochemical Refining and Processing (1)
  • Prevents severe conduit bends and pullout (5)
  • Protection of Fiber Optic Cable, Installation of Instrumentation and Control Cable, Indoor and Outdoor Lighting, Packaging Equipment, Marine and Shipboard Wiring, and Flexing-Component Wiring Protection on Robots, Graphic Arts Equipments, Etc (5)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide flush service for power or communications and data (1)
  • Provide flush service for power, communications and data in wood floors (1)
  • Provides a Positive Seal Against Water, Oil And Dust (4)
  • Provides a Well Rounded Insulating Surface Over Which Conductors May Be Pulled or on Which Conductors May Bear While In Service (3)
  • Provides high capacity for power wiring and communications cabling when feeding modular furniture (1)
  • Provides Mounting Surface for Conduit Where Installation Requires Air Space Between Conduit and Supporting Surface (1)
  • Provides Positive Seal Against Water and Oil (1)
  • Provides terminating point for a group of wires running in one direction (4)
  • Red Dot (1)
  • Repetitive Flexing Arms (1)
  • Residential (1)
  • Residential-Holiday and Landscape Lighting;Wells and Sump Pumps;Sprinkler Systems;Plug-In Timers;Garages and Patios (2)
  • Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum (3)
  • Schools, hospitals, office buildings, airports, casinos, stadiums, petrochemical plants, automotive plants paper plants, food processing, power plants refineries, manufacturing, mining. (3)
  • Seals electrical connections from oxygen and moisture (1)
  • Secure Double-Locking latches, provide a close-fitting top and bottom seal (1)
  • Septic and pump controls (1)
  • Snaps Into a Regular Bushin to Make a UL Listed Insulated Bushing (2)
  • Snaps into a Regular Bushing to make a UL Listed Insulated Bushing (12)
  • Specifically designed for the low voltage, structured cabling market (1)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (27)
  • Suitable for any on grade/below grade application, concrete or wood sub-floor construction approved (2)
  • Suitable for any wiring application (5)
  • Suitable for damp locations (8)
  • Suitable for Fixture Support Up to 50 Lbs (10)
  • Suitable for fixture support up to 50 lbs. (1)
  • Suitable for Fixture Support Up to 70 Lbs (1)
  • Suitable for Masonry Walls (6)
  • Suitable for Use In Hazardous Locations Where General Purpose Equipment is Specifically Permitted by NEC 501-4(B) (9)
  • Suitable for use in Wet Locations (1)
  • Suitable for use on cables with a maximum of four conductors including ground (1)
  • Superstruct(R) Metal Framing System (1)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (45)
  • Support and Framing (25)
  • Support and framing applications (19)
  • Surface Raceway and Lighting Systems (2)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (15)
  • The cover will fit the next smaller size box (3)
  • Through Terminations Where Two Devices or Additional Wiring Capacity is Required. (1)
  • To Change Direction for Threaded, Rigid Conduit or When Terminating at a Box or Fitting (5)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box or Enclosure, or to Couple Ends of Threadless Conduit (6)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box/Enclosure or to Couple Ends of Threadless Conduit (4)
  • To Connect Externally Threaded Conduit or Connector to a Threadless Opening In a Box or Enclosure (4)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (10)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Roated (12)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Rotated (2)
  • To Help Connector Conduit and Cable Fittings to Larger Knockouts (2)
  • To positively bond conduit to box or enclosure (40)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (3)
  • To provide a liquidtight; dust tight connection between flexible, non-metallic conduit and a box or an enclosure. (1)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • To secure pipes, tubes and hoses for fluid conductors (5)
  • To Support and Securely Fasten Rigid Metal Conduit and Intermediate Metal Conduit to the Supporting Surface (7)
  • To support service entrance cable prior to entrance (5)
  • Used in extremely high temperature applications such as commercial ovens and refrigeration, industrial furnaces and foundries (4)
  • Used on wiring ducts & conduit (1)
  • Used to connect modular framing channels to accessories (3)
  • Used to mount, brace, support or connect structural loads in building construction such as pipe or electrical or data wire (5)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (53)
  • UV inhibited for use in direct sunlight (4)
  • Uv Resistant - Suitable For Outdoor Use (6)
  • Wet Location (1)
  • When one-piece quick connect snap-in terminator adapters are installed in a concrete application, Carlons flat sealing washers must be used on the box connection ends (3)
  • Wire Termination (22)
  • Wire Termination and Insulation (1)
  • Show More...

• Number Of Conductors

  

  • 1 (16)
  • 2 (75)
  • 3 (5)
  • 4 (1)
  • Show More...

• Package Quantity

  

  • 1 CA;25 PK (3)
  • 1 ct (9)
  • 1 CT;10 PK (2)
  • 1 CT;100 PK (4)
  • 1 CT;1000 PK (1)
  • 1 CT;150 PK (2)
  • 1 CT;200 PK (2)
  • 1 CT;25 PK (5)
  • 1 CT;250 PK (1)
  • 1 CT;30 PK (3)
  • 1 CT;300 PK (1)
  • 1 CT;5 PK (7)
  • 1 CT;50 Pk (5)
  • 1 CT;500 PK (1)
  • 1 CT;6 Pk (2)
  • 1 CT;60 Pk (2)
  • 1 PK (3)
  • 1 PK ( Inner);10 PK (Outer) (1)
  • 1 RE (1)
  • 10 CT (20)
  • 10 CT;100 PK (27)
  • 10 CT;240 PK (4)
  • 10 CT;50 PK (13)
  • 10 PK (6)
  • 10 PK (Inner);100 PK (Outer) (1)
  • 10 PK;100 CT (1)
  • 10 PK;250 CT (3)
  • 10 PK;500 CT (14)
  • 10 PK;600 CT (2)
  • 100 CT (31)
  • 100 CT;1000 PK (2)
  • 100 CT;400 PK (3)
  • 100 CT;500 PK (11)
  • 100 CT;600 PK (6)
  • 100 CT;800 PK (5)
  • 100 PK (7)
  • 100 PK;25 CT (5)
  • 1000 CT (1)
  • 1000 CT;10000 PK (11)
  • 1000 CT;20000 PK (1)
  • 1000 CT;5000 PK (3)
  • 1000 PK (1)
  • 1000 PK;100 CT (4)
  • 1000 PK;500 CT (1)
  • 10000 PK;100 CT (3)
  • 10000 PK;1000 CT (8)
  • 10000 PK;1000CT (1)
  • 10000 PK;500 CT (1)
  • 12 CT (3)
  • 12 CT;120 PK (6)
  • 12 PK (1)
  • 120 CT;6 PK (3)
  • 15 PK (13)
  • 150 PK (1)
  • 1500 PK (1)
  • 16 CT (1)
  • 18 CT (2)
  • 2 CT;10 PK (6)
  • 2 CT;20 PK (1)
  • 2 PK (2)
  • 2 PK (Inner);20 PK (Outer) (1)
  • 20 CT (12)
  • 20 CT;100 PK (2)
  • 20 CT;200 PK (1)
  • 20 PK (1)
  • 20 PK;500 CT (2)
  • 200 CT;2000 PK (2)
  • 200 PK (1)
  • 20000 PK;100 CT (1)
  • 24 CT (4)
  • 25 CA (1)
  • 25 CT (83)
  • 25 CT;1 PK (1)
  • 25 CT;100 PK (13)
  • 25 CT;1200 PK (1)
  • 25 CT;150 PK (3)
  • 25 CT;250 PK (20)
  • 25 CT;50 PK (11)
  • 25 PK (4)
  • 25 PK (Inner);100 PK (Outer) (3)
  • 25 PK (Inner);50 PK (Outer) (2)
  • 250 CT (2)
  • 250 PK;25 CT (2)
  • 250 PK;50 CT (5)
  • 25000 PK;100 CT (3)
  • 3 CT (1)
  • 3 CT;30 PK (2)
  • 3 PK;1 CT (2)
  • 30 CT (3)
  • 3000 PK;100 CT (1)
  • 36 CT (4)
  • 4 CT;40 PK (1)
  • 4 PK;1 CT (3)
  • 4000 PK;100 CT (1)
  • 48 CT (1)
  • 5 CT (14)
  • 5 CT;100 PK (1)
  • 5 CT;25 PK (11)
  • 5 CT;50 PK (2)
  • 5 PK (3)
  • 5 PK (Inner);25 PK (Outer) (3)
  • 5 PK;1 CT (1)
  • 50 CA (1)
  • 50 CT (82)
  • 50 CT;200 PK (1)
  • 50 CT;25 PK (1)
  • 50 CT;250 PK (3)
  • 50 CT;500 PK (17)
  • 50 PK (3)
  • 50 PK;250 PK (1)
  • 500 CT (7)
  • 500 CT;10000 PK (1)
  • 500 CT;5000 PK (11)
  • 500 PK (2)
  • 500 PK;100 CT (1)
  • 500 PK;25 CT (1)
  • 500 PK;50 CT (11)
  • 5000 PK;100 CT (16)
  • 5000 PK;1000 CT (2)
  • 5000 PK;500 CT (1)
  • 6 CT (3)
  • 6 CT;60 PK (5)
  • 60 CT;6 PK (2)
  • 7000 PK (1)
  • 75 CT (3)
  • 750 PK (1)
  • 8 CT (1)
  • 8 PK;1 CT (2)
  • 8000 CT (1)
  • 900 PK;10 CT (1)
  • Show More...

• Weight

  

  • 0.0003 lb (2)
  • 0.0006 lb (4)
  • 0.001 lb (2)
  • 0.0018 lb (1)
  • 0.002 lb (1)
  • 0.0025 lb (3)
  • 0.003 lb (8)
  • 0.0037 lb (3)
  • 0.004 lb (6)
  • 0.005 lb (12)
  • 0.0056 lb (2)
  • 0.006 lb (8)
  • 0.0062 lb (2)
  • 0.008 lb (1)
  • 0.01 lb (8)
  • 0.01 lb/EA (13)
  • 0.011 lb (2)
  • 0.02 lb (6)
  • 0.02 lb/EA (13)
  • 0.03 lb/EA (11)
  • 0.04 lb/EA (8)
  • 0.05 lb (1)
  • 0.05 lb/EA (8)
  • 0.06 lb/EA (10)
  • 0.07 lb/EA (8)
  • 0.08 lb/EA (8)
  • 0.085 lb/EA (1)
  • 0.09 lb (1)
  • 0.09 lb/EA (11)
  • 0.1 lb/EA (7)
  • 0.105 lb/EA (1)
  • 0.11 lb (1)
  • 0.11 lb/EA (5)
  • 0.12 lb/EA (3)
  • 0.125 lb/EA (2)
  • 0.13 lb (1)
  • 0.13 lb/EA (11)
  • 0.14 lb (2)
  • 0.14 lb/EA (5)
  • 0.15 lb (3)
  • 0.15 lb/EA (5)
  • 0.16 lb/EA (4)
  • 0.165 lb/EA (1)
  • 0.17 lb/EA (3)
  • 0.18 lb/EA (2)
  • 0.1800 lb (1)
  • 0.19 lb/EA (4)
  • 0.21 lb/EA (2)
  • 0.22 lb/EA (6)
  • 0.23 lb (2)
  • 0.23 lb/EA (3)
  • 0.2400 lb (1)
  • 0.25 lb (1)
  • 0.25 lb/EA (14)
  • 0.26 lb (1)
  • 0.26 lb/EA (2)
  • 0.27 lb (1)
  • 0.28 lb/EA (2)
  • 0.29 lb/EA (3)
  • 0.3 lb (1)
  • 0.3 lb/EA (3)
  • 0.30 lb/EA (1)
  • 0.33 lb/100 (1)
  • 0.34 lb/EA (2)
  • 0.35 lb/EA (5)
  • 0.36 lb/EA (4)
  • 0.37 lb/EA (2)
  • 0.38 lb/EA (12)
  • 0.41 lb/EA (2)
  • 0.44 lb/EA (3)
  • 0.45 lb/EA (1)
  • 0.4700 lb (1)
  • 0.4763 lb/EA (1)
  • 0.48 lb/EA (1)
  • 0.5 lb/EA (6)
  • 0.50 lb/EA (8)
  • 0.51 lb/EA (1)
  • 0.52 lb/EA (2)
  • 0.53 lb/EA (2)
  • 0.54 lb (1)
  • 0.54 lb/EA (4)
  • 0.55 lb/EA (3)
  • 0.56 lb/EA (2)
  • 0.57 lb/EA (2)
  • 0.58 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.6 lb (1)
  • 0.60 lb/EA (2)
  • 0.61 lb (1)
  • 0.61 lb/EA (1)
  • 0.62.5 lb/EA (1)
  • 0.63 lb/100 (1)
  • 0.63 lb/EA (3)
  • 0.65 lb/EA (2)
  • 0.68 lb (1)
  • 0.7150 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.7400 lb (1)
  • 0.75 lb (1)
  • 0.75 lb/EA (2)
  • 0.76 lb (1)
  • 0.76 lb/EA (2)
  • 0.79 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.89 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1 lb/EA (2)
  • 1.02 lb/100 (1)
  • 1.03 lb/EA (1)
  • 1.06 lb/ft;0.48 kg/ft (1)
  • 1.13 lb/EA (2)
  • 1.1599 lb/EA (1)
  • 1.18 lb/EA (1)
  • 1.23 lb/EA (1)
  • 1.25 lb/EA (1)
  • 1.31 lb/EA (1)
  • 1.5 lb (1)
  • 1.55 lb/EA (1)
  • 1.63 lb/EA (1)
  • 1.69 lb/100 (1)
  • 1.75 lb/EA (1)
  • 1.9 lb (1)
  • 1.92 lb/100 (1)
  • 11.63 lb/100 (1)
  • 112 lb/100 (1)
  • 112.5 lb/100 (2)
  • 113 lb/100 (1)
  • 115 lb/100 (1)
  • 12 lb/100 (1)
  • 12.38 lb/100 (1)
  • 12.5 lb/100 (7)
  • 124 lb/ft (1)
  • 125 lb/100 (1)
  • 13.33 lb/100 (1)
  • 13.5 lb/100 (2)
  • 136 lb/ft (1)
  • 137.5 lb/100 (2)
  • 14 lb/100 (2)
  • 14.5 lb/100 (1)
  • 15 lb/100 (2)
  • 15.38 lb/100 (1)
  • 15.5 lb/100 (1)
  • 152 lb/100 (2)
  • 155 lb/100 (2)
  • 16 lb/100 (2)
  • 16.63 lb/100 (1)
  • 16.75 lb/100 (1)
  • 16.81 lb/100 (1)
  • 160.5 lb/100 (1)
  • 17 lb/100 (1)
  • 179.5 lb/100 (1)
  • 18 lb/100 (2)
  • 185 lb/100 (5)
  • 19 lb/100 (2)
  • 190 lb/100 (4)
  • 2.13 lb/EA (1)
  • 2.16 lb/EA (1)
  • 2.25 lb/EA (1)
  • 2.39 lb/100 (1)
  • 2.5 lb/100 (1)
  • 2.56 lb/EA (1)
  • 20 lb/100 (1)
  • 20.5 lb/100 (2)
  • 20.63 lb/100 (2)
  • 21 lb/100 (3)
  • 21.5 lb/100 (1)
  • 22.5 lb/100 (2)
  • 23 lb/100 (2)
  • 23.5 lb/100 (2)
  • 25 lb/100 (9)
  • 25.5 lb/100 (1)
  • 27 lb/100 (1)
  • 27.5 lb/100 (3)
  • 28.31 lb/100 (1)
  • 28.5 lb/100 (2)
  • 29 lb/100 (2)
  • 29.63 lb/100 (1)
  • 3.1 lb/EA (1)
  • 3.5 lb/100 (1)
  • 3.53 lb (1)
  • 3.65 lb/100 (1)
  • 30.19 lb/100 (2)
  • 30.5 lb/100 (1)
  • 30.75 lb/100 (1)
  • 31.5 lb/100 (1)
  • 32.5 lb/100 (1)
  • 32.88 lb/100 (1)
  • 33.13 lb/100 (1)
  • 35.5 lb/100 (1)
  • 355 lb/100 (1)
  • 357 lb/100 (1)
  • 36 lb/100 (2)
  • 36.38 lb/100 (1)
  • 360 lb/100 (2)
  • 37.5 lb/100 (15)
  • 39.5 lb/100 (2)
  • 39.63 lb/100 (1)
  • 392 lb/100 (1)
  • 4.04 lb/EA (1)
  • 4.25 lb/EA (1)
  • 4.4 lb (1)
  • 4.5 lb/100 (2)
  • 4.69 lb/100 (1)
  • 40.38 lb/100 (1)
  • 402 lb/100 (1)
  • 41 lb/100 (1)
  • 44 lb/100 (2)
  • 5 lb/EA (1)
  • 50 lb/100 (8)
  • 52.5 lb/100 (1)
  • 525 lb/100 (1)
  • 53.5 lb/100 (2)
  • 54 lb/100 (1)
  • 54.5 lb/100 (1)
  • 55 lb/100 (2)
  • 56.5 lb/100 (1)
  • 6 lb/100 (1)
  • 6.25 lb/100 (1)
  • 6.25 lb/EA (1)
  • 6.81 lb/100 (1)
  • 6.88 lb/100 (1)
  • 62.5 lb/100 (6)
  • 63.5 lb/100 (1)
  • 64.5 lb/100 (1)
  • 67.5 lb/100 (1)
  • 68.38 lb/100 (1)
  • 68.5 lb/100 (1)
  • 7.13 lb/100 (2)
  • 7.5 lb/100 (1)
  • 7.81 lb/100 (1)
  • 71 lb/100 (1)
  • 71.5 lb/100 (1)
  • 73.19 lb/100 (1)
  • 74.5 lb/100 (2)
  • 75 lb/100 (1)
  • 76.81 lb/100 (1)
  • 762.5 lb/100 (1)
  • 8.13 lb/100 (1)
  • 8.5 lb/100 (2)
  • 8.63 lb/100 (1)
  • 8.81 lb/100 (1)
  • 80.19 lb/100 (1)
  • 84.1 lb/ft (1)
  • 84.38 lb/ft (1)
  • 87 lb/ft (3)
  • 87.5 lb/100 (2)
  • 9 lb/100 (2)
  • 9.06 lb/100 (1)
  • 90 lb/100 (1)
  • Show More...

• Enclosure Type

  

  • Nema 4 (1)
  • NEMA 6 and 4X (4)
  • Type 4 / 4X (1)
  • Type 4X (3)
  • Show More...

• Voltage Rating

  

  • 125 V ac (1)
  • 300 kV (1)
  • 300 V (4)
  • 35 kV (151)
  • 600 V (151)
  • 600 V ac (21)
  • 600 V ac/dc (1)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (58)
  • AEROSOLS (1)
  • ALL PLASTIBOND FITTINGS (4)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (10)
  • Comp & Mech Lugs and Butt Splices (296)
  • CONDUIT HANGERS/STAND OFF STRAPS (17)
  • CORD CONNECTORS & CORD GRIPS (53)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (52)
  • DIECAST OFFSET & CHASE NIPPLES (1)
  • DISCONNECTS (1)
  • EMT STRAPS (2)
  • EXOTHERMIC GROUNDING PRODUCTS (1)
  • FASTENERS (1)
  • FLEX & MC FITTINGS (60)
  • FLOOR BOXES (41)
  • FORM 5 CONDULETS, COVERS, & GASKETS (12)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (6)
  • Form 9 condulets, covers & gaskets (1)
  • FS BOXES AND COVERS (7)
  • Fuses & Fuse Accessories (4)
  • HAND TOOLS (5)
  • HANDY BOXES (15)
  • HAZARDOUS LOCATION FITTINGS (2)
  • HAZARDOUS LOCATION MOTOR CONTROL (1)
  • HEAT/COLD SHRINK (4)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (1)
  • Incandescent (Except Residential) (1)
  • LAMPS (4)
  • Liquid Tight (10)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (11)
  • METALLIC FITTINGS (66)
  • MISC FITTINGS (53)
  • Miscellaneous commercial & industrial devices (1)
  • NON METALLIC JUNCTION BOXES (2)
  • NON-METALLIC FITTINGS (34)
  • NON-METALLIC SEALTITE AND FITTINGS (9)
  • OCTAGON BOXES (2)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (3)
  • Plastibond, Fiberglass Conduit & Fittings (1)
  • PLASTIC BOXES (93)
  • PVC & ENT (21)
  • PVC BOXES (3)
  • PVC CONDULETS (2)
  • PVC ELBOWS (9)
  • PVC SPACERS (9)
  • PVC STRAPS (4)
  • REPLACEMENT GLASS (1)
  • Residential cord connectors (4)
  • Residential plates (2)
  • Residential receptacles (3)
  • RIGID COUPLINGS (3)
  • RIGID STRAPS & CLAMPBACKS (10)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (121)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (33)
  • SPLIT BOLTS (60)
  • SPRING NUTS & TWIRL NUTS (13)
  • STEEL BOXES & COVERS (102)
  • STEEL EMT FITTINGS (48)
  • STRUT CHANNEL (51)
  • STRUT STRAPS (64)
  • SWITCH BOXES (10)
  • T&B C TAP LUGS (28)
  • TAPE (4)
  • TERMINALS (166)
  • THREAD RODS (4)
  • TOOL BAG/POUCHES (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (55)
  • WEATHERPROOF BOXES & COVERS (19)
  • WIRE DUCT AND COVERS (42)
  • WIRE LUBE, MARKERS, & TIES (22)
  • WIRE NUTS (4)
  • Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds (1)
  • Show More...

• Stud Size

  

  • #10 (2)
  • 1/2 in (52)
  • 1/4 in (24)
  • 3/8 in (31)
  • 5/16 in (14)
  • 5/8 in (9)
  • Show More...

• Construction

  

  • Drawn (35)
  • Welded (6)
  • Show More...

• Minimum Qty

  

  • 10 (48)
  • 100 (119)
  • 1000 (23)
  • 15 (3)
  • 150 (1)
  • 1500 (1)
  • 175 (1)
  • 20 (20)
  • 200 (7)
  • 25 (7)
  • 250 (3)
  • 50 (71)
  • 500 (22)
  • 6 (27)
  • 7000 (1)
  • 75 (3)
  • 750 (3)
  • 8000 (1)
  • Show More...

• Knockouts

  

  • 0 (134)
  • 1 (5)
  • 10 (2)
  • 11 (5)
  • 12 (7)
  • 13 (6)
  • 16 (6)
  • 17 (5)
  • 20 (2)
  • 22 (2)
  • 24 (2)
  • 26 (2)
  • 3 (1)
  • 4 (6)
  • 5 (1)
  • 7 (3)
  • 8 (4)
  • FALSE (28)
  • true (68)
  • Yes (2)
  • Show More...

• Number Of Mounting Holes

  

  • 1 (18)
  • 2 (9)
  • Show More...

• Insulation Material

  

  • Nylon (4)
  • PVC (2)
  • Vinyl (32)
  • Show More...

• Terminal Type

  

  • Compression (17)
  • Compression;Crimp (22)
  • Crimp (3)
  • Disconnect Terminal (5)
  • Fork Terminal (12)
  • Male Tab (1)
  • Ring Terminal (7)
  • Ring Tongue (3)
  • Screw (24)
  • Splice Connector (4)
  • Split (14)
  • Tension (2)
  • Tongue (32)
  • Wire Joints (1)
  • Wire Terminal Disconnect (2)
  • Show More...

• Temperature Rating

  

  • 105 C (12)
  • 150 C (3)
  • 75 C (4)
  • 90 C (15)
  • Show More...

• Type

  

  • 90 degree Angle Fittings (10)
  • Adjustable Covers (2)
  • Adjustable mud ring (2)
  • Aluminum Flood-Seal Multi-Port Connector RAB 350 Series (1)
  • Aluminum Service Wedge Clamp (3)
  • Aluminum Splice (15)
  • Angular Fittings (2)
  • Armored Cable/Flexible Metal Conduit Fittings (1)
  • Automatic Tension Splice (2)
  • Bar Hangers (3)
  • Base Spacer (4)
  • Beam Clamps (3)
  • Beam Clamps & Hanger Rod Supports (1)
  • Beam Clamps (Series 500) (3)
  • Box & Threaded Adapters (2)
  • Box Partitions (1)
  • Brackets (2)
  • Bulkhead Fitting (7)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • Bushings (1)
  • Cable Caps (2)
  • CAP FITTING, 304/304L STAINLESS STEEL MATERIAL; 4 INCH NOMINAL SIZE; 4 NOMINAL SIZE - DECIMAL; 4 NOMINAL SIZE - FRACTIONAL; NUCLEAR, PHARMACEUTICAL INDUSTRY CHEMICAL, PETROCHEMICAL APPLICATION; FORGED PROCESS; ASTM A182 MATERIAL SPECIFICATION (2)
  • Ceiling Boxes (17)
  • Ceiling Pan Boxes (1)
  • Channels and Concrete Inserts (2)
  • Chemical Products (1)
  • Circuit Safe NEMA Enclosures (1)
  • Clamp, Beam (4)
  • Clamp, RC Beam (2)
  • Clamps (1)
  • Clips (2)
  • Compression Couplings & Connectors (14)
  • Compression Splice Service Entrance (49)
  • Conduit and Voltage Marker Cards (3)
  • Conduit Body - Series A - Rigid/IMC (1)
  • Conduit Body Covers & Gaskets-Series A & B (1)
  • Conduit Clamps & Support Straps (4)
  • Conduit Coupling (4)
  • Conduit Elbow - Standard Radius (5)
  • Conduit Hangers (10)
  • Conduit, Cable & Pipe Supports (8)
  • Conduit-PVC Coated (5)
  • Cone Nut (3)
  • Connectors-45 Degree (15)
  • Connectors-90 Degree (30)
  • Connectors-Straight (31)
  • Copper Connectors (8)
  • Cord Connectors-Straight (1)
  • Couplings (3)
  • Crimping Tool (1)
  • C-Tap (8)
  • C-Type Compression Tap (5)
  • DETECTABLE (6)
  • Device Boxes, Covers & Accessories (10)
  • Drop-In Floor Boxes (1)
  • Dual Voltage Outlet Box/Bracket (1)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • Duct Cover (5)
  • eFab (3)
  • EMT Conduit Fittings (49)
  • ENT Fittings (5)
  • ENT Flexible Raceway (27)
  • Expansion Fittings (3)
  • Extension Rings (12)
  • Extra Heavy Duty (2)
  • E-Z-Ground Compression Grounding (7)
  • Female Reducer (1)
  • Fittings & Hardware (7)
  • Fittings, Brackets & Hardware (20)
  • Flat Plate Fittings (1)
  • Flexible Raceway (1)
  • Flush Service (26)
  • Form 7 Conduit Body (2)
  • Form 8 UL-4X Conduit Body (2)
  • Gang Boxes (5)
  • GROUND CLAMP (15)
  • Ground Clamps (1)
  • Ground Rod Clamp (2)
  • Grounding Bushings & Accessories (10)
  • Grounding Connector-90&deg, (1)
  • Grounding Connectors-45 degree (11)
  • Grounding Connectors-90 degree (11)
  • Grounding Connectors-Straight (15)
  • Grounding Hub (8)
  • Hanger, Conduit and Pipe (1)
  • Hangers (2)
  • Hardware & Accessories (5)
  • Hardware & Rough-In (8)
  • Hazardous Location Conduit Fitting (1)
  • Head (Buckle) (1)
  • Heat Shrinkable Butt Splice (3)
  • HEAVY DUTY (8)
  • Heavy Duty Mounting Cradle (1)
  • High Density Poluethylene Duct (3)
  • HIGH PERFORMANCE (48)
  • Hit Lock Connectors (1)
  • Hook and Loop (1)
  • H-Type Compression Tap Connector (12)
  • Hub Connector (11)
  • Insulated Bushing (4)
  • Insulated Conductor Connectors (3)
  • Insulating Sleeve (14)
  • Integrated Mounting Hole (5)
  • Intergrated Mounting Hole (3)
  • INTERMEDIATE (4)
  • Intermediate Spacer (4)
  • Label Printers and Labels (4)
  • Ladder (10)
  • Lampholders, Garden Lights & Accessories (1)
  • Landscape Lights (1)
  • Liquid Tight Flexible Metallic Conduit (4)
  • Liquidtight Fittings (12)
  • Liquidtight Flexible Metal Conduit Fittings (1)
  • Liquidtight Flexible Non-Metallic Conduit (4)
  • Liquidtight Flexible Non-Metallic Conduit & Fittings (1)
  • Liquidtight Sealing Gasket (6)
  • Locknut for Conduit Fitting (2)
  • Locknuts (5)
  • Long Barrel (68)
  • Long Barrel 90 Degree Bend (1)
  • Long Barrel Copper Splice (3)
  • Long Line Couplings (3)
  • Low Voltage Brackets (2)
  • Luminaire Disconnect (1)
  • Manual Crimp Tool (3)
  • Manual Tool (2)
  • Masonry Boxes (8)
  • Mechanical Connector (1)
  • Mechanical Grounding (18)
  • Metal Channels (49)
  • MINIATURE (4)
  • Motor Disconnect Boot (1)
  • Motor Lead Female Disconnect (1)
  • Motor Lead Male Disconnect (2)
  • MOUNTING BASE (12)
  • Multi-Gang Rectangular Floor Boxes & Covers (7)
  • Narrow Slot Duct (14)
  • Natural (5)
  • Non-Insulated 90 Degree Flag Female Disconnect (1)
  • Non-Insulated Adapter (1)
  • Non-Insulated Female Disconnect (1)
  • Non-Insulated Ferrule (1)
  • Non-Insulated Fork Terminal (2)
  • Non-Insulated Heavy-Duty Ring Terminal (1)
  • Non-Insulated Parallel Splice (1)
  • Non-Insulated Ring Terminal (17)
  • Nylon Fully Insulated Female Barrel Flag Disconnect (1)
  • Nylon Fully Insulated Female Disconnect (5)
  • Nylon Fully Insulated Male Disconnect (3)
  • Nylon Insulated Butt Splice (4)
  • Nylon Insulated Female Disconnect (5)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Parallel Splice (1)
  • Nylon Insulated Ring Terminal (10)
  • Nylon Insulated Wire Joint (4)
  • Octogonal Boxes (18)
  • One-Gang Adjustable New Work Outlet Box (1)
  • One-Gang Nail-On New Work Box (1)
  • Outlet Box Covers (89)
  • Outlet Boxes (54)
  • P&C Flex Corrugated Flexible Conduit (3)
  • Pipe Spacer (1)
  • Pipe Strap for Securing Conduit Systems (7)
  • Pipe Straps & Spacers (2)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (58)
  • Pipe Straps, Pipe Clamps and Hangers (2)
  • Plates (1)
  • Poke Through Systems (1)
  • Polypropylene Insulated Ferrule (9)
  • Post Bases (2)
  • Recessed Service (2)
  • Reducer Spacer (1)
  • Reducing Washer for Conduit Systems (2)
  • Residential, Wood Sub-Floors-Adjust-A-Box (2)
  • Rigid and Intermediate Metal Conduit Fittings (1)
  • Rigid Non-Metallic Conduit Bodies & Covers (2)
  • Rigid Non-Metallic Conduit Fittings & Accessories (6)
  • Rigid Non-Metallic Conduit Junction Boxes (4)
  • Rigid Non-Metallic Conduit-Schedule 40 Elbows (6)
  • Rigid Non-Metallic Conduit-Schedule 80 Elbows (1)
  • Rigid Non-Metallic FS & FD Boxes & Covers (5)
  • Rigid/IMC Conduit Fittings (1)
  • Riser-Gard Flexible Raceway (3)
  • Risers & Riser Caps (2)
  • Round Boxes (3)
  • Round Floor Boxes, Covers & Accessories (12)
  • Round Old Work Box (2)
  • Saddle Support Base (1)
  • Safety Labels (2)
  • Sealants & Lubricants (2)
  • Sealing Compound (2)
  • Sealing Fitting - Vertical/Horizontal (1)
  • Set Screw Couplings & Connectors (1)
  • Short Barrel Copper Splice (2)
  • Specialty Electrical Boxes (1)
  • Spiral Wrap (4)
  • SPLICE (13)
  • Splice Connector (14)
  • Splice Insulators and Insulating Covers (1)
  • Split-Bolt (27)
  • Square Boxes (1)
  • Squeeze Connectors (7)
  • Stainless Steel (3)
  • Standard Barrel (63)
  • Straight Sections (4)
  • Strain Relief Cord Connectors-Straight (9)
  • Strap on a Reel (1)
  • Supports (1)
  • Surface Raceway & Lighting Systems (Series 800) (2)
  • Switch Boxes (20)
  • Teck Cable Fittings (3)
  • TERMINAL KIT (1)
  • Thin-Wall Heat Shrinkable Tubing (3)
  • Threaded Products & Hardware (Series 100) (17)
  • Threaded Reducer (1)
  • Threadless Connector (10)
  • Three-Piece Couplings (6)
  • Two Hole Pipe Strap (1)
  • Two-Bolt Connector (1)
  • Two-Gang Nail-On New Work Outlet Box (1)
  • Type A-Non-Metallic Liquidtight Conduit (6)
  • Type B Liquidtight Tubing & Fittings (5)
  • Type C, H-Type Compression Connector Cover (1)
  • Type LB Conduit Body (1)
  • Universal Flip-Lid Weatherproof Covers (1)
  • Utility Boxes (7)
  • UV Resistant Black (7)
  • Vaportight Lighting & Accessories (3)
  • Vinyl Insulated Butt Splice (12)
  • Vinyl Insulated Female Disconnect (9)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Male Disconnect (8)
  • Vinyl Insulated Piggy Back Disconnect (1)
  • Vinyl Insulated Ring Terminal (38)
  • Weatherproof "T" Boxes & Covers (3)
  • Weatherproof Covers (8)
  • While-In-Use-Weatherproof Covers (2)
  • Wide Slot Duct (7)
  • Wire Connectors & Termination (2)
  • Wire Marker Books (11)
  • Wiremesh Grips (5)
  • Show More...

• Size

  

  • 1 (1)
  • 1 in (7)
  • 1 INCH (38)
  • 1 X 3/4 (1)
  • 1/2 (1)
  • 1/2 in (18)
  • 1/2 INCH (51)
  • 1/2 Inches (1)
  • 1/4 in (6)
  • 1/4 INCH (1)
  • 10.79 Inches (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 1-5/8 Inches Depth (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • 1-1/2 (3)
  • 1-1/2 in (3)
  • 1-1/2 INCH (21)
  • 1-1/2 Inches (2)
  • 1-1/4 in (3)
  • 1-1/4 INCH (22)
  • 1-1/4 Inches (5)
  • 12.29 Inches (1)
  • 13/16 inch Length (1)
  • 1-Inch (3)
  • 2 (6)
  • 2 1/2 Inch (1)
  • 2 in (4)
  • 2 INCH (35)
  • 2 Inches (5)
  • 2 Inches Height x 3 Inches Width x 7/8 Inches Depth (1)
  • 2 x 2 inches (2)
  • 2 x 3 inches (2)
  • 2-1/2 (1)
  • 2-1/2 in (1)
  • 2-1/2 Inch (8)
  • 2-1/2 Inches (3)
  • 2-25/32 inch (12)
  • 24 Inches (1)
  • 3 (1)
  • 3 in (2)
  • 3 INCH (12)
  • 3 Inches (5)
  • 3 Inches Height x 2 Inches Width x 1-1/2 inches depth (1)
  • 3 Inches Height x 2 Inches Width x 2-1/2 inches depth (8)
  • 3 Inches Height x 2 Inches Width x 2-1/4 inches depth (2)
  • 3 Inches Height x 2 Inches Width x 2-3/4 inches depth (5)
  • 3 Inches Height x 2 Inches Width x 3-1/2 inches depth (4)
  • 3 x 3 inches (2)
  • 3.69 Inches x 3.69 Inches x 2 Inches (1)
  • 3/4 (2)
  • 3/4 in (11)
  • 3/4 INCH (43)
  • 3/4 Inch/21mm (1)
  • 3/8 in (9)
  • 3/8 INCH (10)
  • 3-1/2 in (1)
  • 3-1/2 Inch (18)
  • 3-1/2 Inches (3)
  • 3-1/2 Inches Diameter x 1-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 1-15/16 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 1-15/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 1-7/8 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 3-1/2 Inches Depth (2)
  • 3-3/4 Inches Length x 5-9/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 7-3/8 Inches Width x 3-1/2 Inches Depth (1)
  • 37.68 Inches (1)
  • 39.43 Inches (1)
  • 4 (1)
  • 4 in (1)
  • 4 INCH (11)
  • 4 Inches (54)
  • 4 Inches Diameter x 3-1/2 Inches Depth (1)
  • 4 Inches Diameter x 4 Inches Depth (2)
  • 4 Inches Height x 4 Inches Width x 2-1/8 Inches depth (1)
  • 4 Inches Length x 2-1/8 Inches Width x 1-1/2 Inches Depth (1)
  • 4 Inches Length x 2-1/8 Inches Width x 1-7/8 Inches Depth (3)
  • 4 Inches Length x 2-1/8 Inches Width x 2-1/8 Inches Depth (3)
  • 4 Inches Length x 4 Inches Width (2)
  • 4 Inches Length x 4 Inches Width x 1-1/2 Inches Depth (6)
  • 4 Inches Length x 4 Inches Width x 2-1/8 Inches Depth (1)
  • 4 x 3 inches (2)
  • 4-1/8 Inches Length x 2-1/2 Inches Width x 1-15/16 Inches Depth (1)
  • 4-11/16 Inches (22)
  • 4-11/16 Inches Height x 4-11/16 Inches Width x 2-1/8 Inches depth (1)
  • 4-11/16 Inches Length x 4-11/16 Inches Width x 1-1/2 Inches Depth (1)
  • 4-11/16 Inches Length x 4-11/16 Inches Width x 2-1/8 Inches Depth (1)
  • 5 x 3 /12 (1)
  • 59.82 Inches (1)
  • 6 Inches (1)
  • 6 Inches x 6 Inches x 4 Inches (1)
  • 7.34 Inches (1)
  • 8 Ounce (3)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 1-5/8 Inches Depth (1)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • 9/16 in (3)
  • Length 1-1/2 inch (1)
  • Length 1-11/16 inch (1)
  • Length 1-13/16 inch (3)
  • Length 13/16 inch (1)
  • Length 1-3/4 inch (1)
  • Length 1-7/16 inch (1)
  • Length 1-7/8 inch (1)
  • Length 2-3/16 inch (1)
  • Length 2-7/16 inch (1)
  • Length 4-13/16 inches (1)
  • Length from 10-1/2 Inches to 18-1/2 Inches (1)
  • Length from 14-1/2 Inches to 26-1/2 Inches (2)
  • Screw Length 2-1/4 Inch (1)
  • Splice 4 inch, Sleeve 5-1/2 inch (6)
  • Various Sizes Included (1)
  • Show More...

• Wire Size

  

  • 10 AWG (1)
  • 12 AWG (2)
  • 12-10 AWG (40)
  • 14 AWG (1)
  • 16 AWG (2)
  • 16-14 AWG (12)
  • 18 AWG (1)
  • 18-14 AWG (25)
  • 18-17 AWG (1)
  • 2 AWG (2)
  • 20 AWG (1)
  • 22-10 AWG (1)
  • 22-16 AWG (22)
  • 22-18 AWG (1)
  • 4 AWG (3)
  • 6 AWG (7)
  • 8 AWG (6)
  • 8-2 AWG CU , 10-6 AWG AL (1)
  • Main .204 to .162 in , Tap .128 to .204 in (1)
  • Main: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG (1)
  • Main: #3 to #6 ACSR or #2 to #6 STR or #1 to #4 SOL AWG , Tap: #8 to #14 STR or #8 to #14 SOL AWGp: #8 to #14 STR AWG , #8 to #14 SOL AWG (1)
  • Main: 1/0 to #2 ACSR or 2/0 to #1 STR AWG , Tap: 1/0 to #2 ACSR or 2/0 to #2 STR AWG (1)
  • Main: 1/0 to #3 ACSR or 2/0 to #2 STR or 3/0 to #1 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 1/0 to #4 ACSR or 2/0 to #3 STR or 2/0 to #2 SOL AWG , Tap A: #8 to #10 STR or #6 to #10 SOL AWG , Tap B: #12 to #14 STR or #12 to #14 SOL AWG (1)
  • Main: 1/0 to #4 ACSR or 2/0 to #4 STR or #1 to #2 SOL AWG , Tap: 1/0 to #4 ACSR or 2/0 to #4 STR or #1 to #2 SOL AWG (1)
  • Main: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 4/0 to 2/0 SOL AWG , Tap: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Main: 2/0 to 1/0 ACSR or 3/0 to 2/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Main: 4/0 to 3/0 ACSR or 4/0 to 3/0 STR AWG , Tap: 2/0 to #1 ACSR or 2/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Show More...

• Depth

  

  • 0.37 IN (2)
  • 0.718 (1)
  • 0.955 (1)
  • 1 (2)
  • 1/2 (12)
  • 1-1/2 (14)
  • 1-11/32 (1)
  • 12.05 (1)
  • 13.53 (1)
  • 13/16 (15)
  • 13/16 In (1)
  • 15 (1)
  • 15.89 (1)
  • 1-5/8 (29)
  • 1-5/8 In (2)
  • 18.46 (1)
  • 2 (6)
  • 2.1 (1)
  • 2.15 (1)
  • 21.92 (1)
  • 2-1/8 (17)
  • 2-3/8 (4)
  • 3 (7)
  • 3/4 (1)
  • 3/4 in to 1-1/2 in depth (1)
  • 3-1/8 (1)
  • 36.63 (1)
  • 4 (5)
  • 4.5 (1)
  • 5/8 in to 1-1/4 in depth (1)
  • Show More...

• Mounting

  

  • 16 Inch adjustable bar hanger (2)
  • Adhesive (4)
  • Adhesive/Screw (1)
  • ADJUSTABLE BAR HANGER (2)
  • Adjustable Bracket (1)
  • Angled nails (1)
  • Angled side nails (3)
  • Base, ears and snap-in bracket (1)
  • Captive nails (2)
  • Compound angled nails (1)
  • L BRACKET (1)
  • L bracket and nails (1)
  • Lag Screws (1)
  • Mounting Ears & (2) Swing Clamps (1)
  • Mounting Ears and Captive Nails (1)
  • N bracket (1)
  • Nails (1)
  • None (61)
  • Recessed Angled Nails (1)
  • SCREW (2)
  • Screws (1)
  • Self-Adhesive (7)
  • Swing clamps (3)
  • Yes (3)
  • Show More...

• Style

  

  • 2-Way (1)
  • 4-Way (2)
  • Detectable (1)
  • Extra Heavy-Duty (2)
  • Heavy-Duty (5)
  • Intermediate (8)
  • Miniature (2)
  • Mounting Head (1)
  • Mounting Hole Cable Tie (1)
  • Spiral Wrap (1)
  • Standard (22)
  • Show More...

• Tensile Strength

  

  • 11 (2)
  • 120 (10)
  • 120 lb/530 N (7)
  • 120 lb/534 N (4)
  • 120;534 (1)
  • 175 lb/778 N (2)
  • 18 (7)
  • 18 lb/80 N (4)
  • 2200 psi;15.0 MPa (1)
  • 250 (2)
  • 250;1112 (1)
  • 29 (1)
  • 30 (2)
  • 30 lb/135 N (5)
  • 40 (7)
  • 40 lb (1)
  • 40 lb/178 N (8)
  • 40;180 (1)
  • 450;2002 (2)
  • 50 (14)
  • 50 lb/220 N (8)
  • 50 lb/222 N (4)
  • 50;222 (4)
  • 90 (1)
  • Show More...

• Thread Size

  

  • 1 in (2)
  • 1 in NPT (7)
  • 1 INCH (1)
  • 1/2 - 13 (4)
  • 1/2 in (8)
  • 1/2 in - 13 (1)
  • 1/2 in NPT (9)
  • 1/2 INCH (2)
  • 1/4 - 20 (3)
  • 1/4 in - 20 (1)
  • 1-1/2 in NPT (7)
  • 1-1/4 in NPT (4)
  • 2 in NPT (8)
  • 2-1/2 in NPT (3)
  • 3 in NPT (4)
  • 3/4 in (7)
  • 3/4 in NPT (9)
  • 3/4 INCH (2)
  • 3/8 - 16 (3)
  • 3/8 in NPT (3)
  • 3/8-16 (2)
  • 4 in NPT (3)
  • 5/16 -18 (1)
  • Show More...

• Insulation Color

  

  • Black (2)
  • Black (Die Color) (6)
  • Blue (16)
  • Blue (Die Color) (5)
  • Brown (Die Color) (7)
  • Gray (Code) (1)
  • Gray (Die Color) (5)
  • Green (Code) (1)
  • Green (Die Color) (3)
  • Olive (Code) (1)
  • Orange (2)
  • Orange (Die Color) (3)
  • Orange;Red (1)
  • Pink (Code) (1)
  • Pink (Die Color) (3)
  • Purple (Die Color) (3)
  • Red (8)
  • Red (Die Color) (7)
  • White (1)
  • White (Code) (1)
  • Yellow (14)
  • Yellow (Code) (1)
  • Yellow (Die Color) (2)
  • Yellow;Gray (1)
  • Show More...

• Thickness

  

  • 0.01 (2)
  • 0.03 in;0.75 mm (2)
  • 0.035 (2)
  • 0.04 (16)
  • 0.040000000000000 (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.047 (2)
  • 0.048 in;1.22 mm (1)
  • 0.049 (1)
  • 0.049 in;1.25 mm (1)
  • 0.05 (16)
  • 0.05 in;1.2 mm (5)
  • 0.05 in;1.31 mm (4)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.06 (8)
  • 0.06 in;1.52 mm (1)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.062500000000000 (1)
  • 0.075 in;1.91 mm (4)
  • 0.08 (5)
  • 0.085 in;2.15 mm (2)
  • 0.104 (1)
  • 0.112 (2)
  • 0.132 in (1)
  • 0.198 in;5.03 mm (1)
  • 0.205 in (1)
  • 0.322 in;0.817 cm (2)
  • 0.38 (1)
  • 0.508 in (1)
  • 0.75 (1)
  • 0.8 (1)
  • 1.41 in;35.8 mm (1)
  • 1.54 in;39.1 mm (1)
  • 1.97 in;50.0 mm (1)
  • 1/4 (2)
  • 1/4 in (17)
  • 1/8 (1)
  • 1/8 in (1)
  • 11 ga (2)
  • 11 Gauge (2)
  • 11/64 (1)
  • 12 AWG (17)
  • 12 ga (7)
  • 12 GAUGE (3)
  • 14 AWG (8)
  • 14 ga (14)
  • 14 GAUGE (2)
  • 15/64 (2)
  • 16 ga (1)
  • 3/16 (5)
  • 3/8 in (1)
  • 5/16 in (1)
  • 7/32 (1)
  • Thin (2)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (Stranded);#10 AWG (Solid);6 sq.mm (Stranded) (1)
  • #12 AWG (12)
  • #14 AWG (8)
  • #14 AWG (Minimum Tap with Maximum Main);#10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#12 AWG (Stranded Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#8 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Solid) (1)
  • #14 AWG (Stranded) (1)
  • #16 AWG (7)
  • #18 AWG (6)
  • #2 AWG (1)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (1)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (3)
  • #3 AWG (1)
  • #4 AWG (1)
  • #4 AWG (Range for Equal Main and Tap-Solid) (1)
  • #4 AWG (Stranded) (1)
  • #6 AWG (3)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Stranded Main);#6 AWG (Stranded Tap);#8 AWG (Stranded Main) (1)
  • #6 AWG (Stranded) (10)
  • #8 AWG (1)
  • #8 AWG (Range for Equal Main and Tap);#12 AWG (Minimum Tap with Maximum Main) (1)
  • #8 AWG (Range for Equal Main and Tap-Solid) (1)
  • #8 AWG (Range of Equal Main and Tap-Solid) (1)
  • #8 AWG (Solid) (1)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • 250 kcmil (Range for Equal Main and Tap) (1)
  • 400 kcmil (Range for Equal Main and Tap) (1)
  • 6/1 AWG (ASCR);2/0 AWG (AAAC);2/0 AWG (AAC) (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (1)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #10 AWG (12)
  • #10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (13)
  • #18 AWG (3)
  • #2 AWG (7)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (ASCR );#1 and #2 AWG (Stranded );#1 AWG (Solid ) (1)
  • #2 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Stranded) (1)
  • #3 AWG (Range for Equal Main and Tap-Solid);#16 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (5)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (ASCR);#2 AWG (Solid ) (1)
  • #4 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (Stranded Main);#4 AWG (Stranded Main) (1)
  • #4 AWG (Stranded) (1)
  • #5 AWG (Stranded);#4 AWG (Solid);16 sq.mm (Stranded) (1)
  • #6 AWG (7)
  • #6 AWG (ASCR );#4 AWG (Solid ) (1)
  • #6 AWG (Range for Equal Main and Tap);#4 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #6 AWG (Solid Equal Main and Tap) (1)
  • #6 AWG (Solid);#4 AWG (Stranded) (1)
  • #6 AWG (Stranded) (1)
  • #8 AWG (5)
  • #8 AWG (Solid Equal Main and Tap) (1)
  • 1/0 AWG (7)
  • 1/0 AWG (ACSR);1/0 AWG (Stranded) (1)
  • 1/0 AWG (ASCR );1/0 AWG (Stranded );#1 AWG (Solid ) (1)
  • 1/0 AWG (ASCR);1/0 AWG (Stranded);2/0 AWG (Compact Conductor-Stranded) (1)
  • 1/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 1/0 AWG (Stranded) (3)
  • 1/0 AWG (Stranded);1/0 AWG (Solid);50 sq.mm (Stranded) (1)
  • 2/0 AWG (7)
  • 2/0 AWG (ASCR);2/0 AWG (Stranded);3/0 AWG (Compact Conductor-Stranded) (1)
  • 2/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 2/0 AWG (Stranded ) (1)
  • 2/0 AWG (Stranded) (2)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (6)
  • 250 kcmil to #1AWG (Range of Equal Main and Tap);#8 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 250 MCM (1)
  • 3/0 AWG (3)
  • 300 kcmil (2)
  • 350 kcmil (7)
  • 350 kcmil (Range for Equal Main and Tap);1/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 4/0 AWG (4)
  • 4/0 AWG (ASCR);4/0 AWG (Stranded) (1)
  • 4/0 AWG (Range for Equal Main and Tap-Stranded);#6 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 500 kcmil (3)
  • 500 kcmil (Range for Equal Main and Tap);2/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 600 kcmil (3)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:#3, #4, #6 AWG (ACSR), #2, #3, #4, #6 AWG (Stranded), #1, #2, #3, #4 AWG (Solid);Standard Conductor-Tap A:#8, #10, #12, #14 AWG (Stranded), #8, #10, #12, #14 AWG (Solid) (1)
  • Standard Conductor-Main:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2, #3, #4 (ASCR), 2/0, 1/0, #1, #2, #3 (Stranded), #1, #2 (Solid);Standard Conductor-Tap A:#8, #10 (Stranded), #6, #8, #10 (Solid);Standard Conductor-Tap B:#12, #14 (Stranded), #12, #14 (Solid) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Bundle Diameter

  

  • 0.0625 in (Minimum);1.59 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);1.75 in (Maximum);44.45 mm (Maximum) (4)
  • 0.0625 in (Minimum);1.59 mm (Minimum);2.0 in (Maximum);50.8 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (4)
  • 0.08 in (Minimum);2 mm (Maximum) to 2.99 in (Maximum);76 mm (Maximum) (1)
  • 0.08 in (Minimum);2 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);1.14 in (Maximum);29 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);3.0 in (Maximum);76 mm (Maximum) (2)
  • 0.08 in (Minimum);2.0 mm (Minimum);2.99 in (Maximum);76 mm (Maximum) (1)
  • 0.138 in (Minimum);3.5 mm (Minimum);1.77 in (Maximum);45 mm (Maximum) (3)
  • 0.138 in (Minimum);3.5 mm (Minimum);4.01 in (Maximum);102 mm (Maximum) (2)
  • 0.187 in (Minimum);4.76 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (1)
  • 0.187 in (Minimum);4.76 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (1)
  • 0.187 in (Minimum);4.76 mm (Minimum);4.875 in (Maximum);123.83 mm (Maximum) (1)
  • 0.187 in;4.76 mm (Minimum);7.0 in (Maximum);177.8 mm (Maximum) (1)
  • 0.236 in (Minimum);6 mm (Minimum);3.54 in (Maximum);90 mm (Maximum) (3)
  • 0.236 in (Minimum);6 mm (Minimum);5.0 in (Maximum);127 mm (Maximum) (2)
  • 0.236 in (Minimum);6 mm (Minimum);6.96 in (Maximum);177 mm (Maximum) (1)
  • 0.236 in (Minimum);6 mm (Minimum);9.01 in (Maximum);229 mm (Maximum) (1)
  • 1.25 in (Maximum);31.75 mm (Maximum) (2)
  • 10.75 in (Maximum);273.05 mm (Maximum) (1)
  • 7.2 in (Maximum);182.88 mm (Maximum) (1)
  • Red Dot (1)
  • Show More...

• Conductor Size

  

  • #1 Str - 2/0 Str (2)
  • #14 to #6 AWG (1)
  • #4 to #2/0 AWG (2)
  • #6 - #2 AWG (1)
  • #6 - #4 AWG (2)
  • 1 - 4/0 AWG (1)
  • 1/0 - 2/0 AWG (1)
  • 10 - 4 AWG (3)
  • 1-4/0 (1)
  • 2/0 AWG - 250 kcmil (1)
  • 2/0 AWG - 250kcmil (4)
  • 3/0 - 4/0 AWG (1)
  • 3/0 AWG - 250 kcmil (2)
  • 300 - 500 kcmil (1)
  • 4 - 2/0 (2)
  • 4 - 2/0 AWG (2)
  • 4-2 (1)
  • 4-4/0 (1)
  • 8 - 4 (1)
  • 8 - 4 AWG (5)
  • 8-4 (1)
  • 8-6 (1)
  • Show More...

• Overall Length

  

  • 0.43 in (1)
  • 0.571 in;14.5 mm (1)
  • 0.650 in;16.5 mm (1)
  • 0.75 in (1)
  • 0.866 in;22 mm (1)
  • 0.899 in (2)
  • 0.95 in (1)
  • 0.96 in (1)
  • 0.965 in;24.5 mm (1)
  • 0.97 in (6)
  • 0.971 in (1)
  • 0.984 in;25 mm (1)
  • 0.986 in (2)
  • 1 in (3)
  • 1.06 in (2)
  • 1.088 in (1)
  • 1.09 in (3)
  • 1.13 in (3)
  • 1.16 in (2)
  • 1.20 in (1)
  • 1.23 in (1)
  • 1.25 in (1)
  • 1.29 in (1)
  • 1.31 in (2)
  • 1.38 in (1)
  • 1.41 in (1)
  • 1.42 in (1)
  • 1.50 in (3)
  • 1.54 in (1)
  • 1.63 in (1)
  • 1.65 in (3)
  • 1.70 in (1)
  • 1.75 in (3)
  • 1.81 in (1)
  • 1.88 in (2)
  • 1.92 in (1)
  • 1.93 in (1)
  • 10.46 (1)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-1/4 in (1)
  • 1-1/8 in (1)
  • 1-11/15 in (1)
  • 1-11/16 in (Screw) (1)
  • 1-11/32 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 1-19/32 in (1)
  • 13.75 in (1)
  • 13/16 in (1)
  • 1-3/64 in (1)
  • 15/16 in (1)
  • 1-5/32 in (1)
  • 16.25 in (1)
  • 1-61/64 in (1)
  • 1-7/18 in (1)
  • 1-7/8 in (1)
  • 1-9/32 in (1)
  • 2 in (8)
  • 2.03 in (2)
  • 2.18 in (2)
  • 2.23 in (1)
  • 2.25 in (2)
  • 2.28 in (1)
  • 2.50 in (1)
  • 2.60 in (2)
  • 2.68 in (1)
  • 2.70 in (1)
  • 2.85 in (1)
  • 2-1/4 in (1)
  • 2-1/4 in (Screw) (2)
  • 2-1/8 in (2)
  • 2-11/16 in (1)
  • 2-13/16 in (1)
  • 2-13/18 in (1)
  • 2-25/32 in (5)
  • 23.75 (1)
  • 2-3/16 in (1)
  • 2-3/4 in (1)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3.30 in (1)
  • 3.5 in (3)
  • 3.66 in (1)
  • 3/4 in (1)
  • 31/32 in (1)
  • 3-1/32 in (1)
  • 3-3/16 in (2)
  • 4 in (1)
  • 4.20 in (1)
  • 4.48 in (1)
  • 4.70 in (1)
  • 4-1/4 in (1)
  • 4-3/16 in (2)
  • 5.40 in (1)
  • 5.83 in (1)
  • 6 in (1)
  • 7-1/4 in (1)
  • 9.125 (1)
  • 9.6 (1)
  • 9/16 in (1)
  • Show More...