Narrow By:

• Manufacturer: Hubbell

• Product Type

  

  • 1 1/2" 90° LT Connector Non-Insulated (1)
  • 1 1/2" STR LT Connector Non-Insulated (1)
  • 1 1/4" 90° LT Connector Non-Insulated (1)
  • 1 1/4" Alum Conduit Body "X" (1)
  • 1 1/4" STR LT Connector Non-Insulated (1)
  • 1" 45° LT Connector Non-Insulated (1)
  • 1" 90° LT Connector Non-Insulated (1)
  • 1" Alum Conduit Body "X" (1)
  • 1" C Type Alum Conduit Body (1)
  • 1" STR LT Connector Non-Insulated (1)
  • 1" T Type Alum Conduit Body (1)
  • 1/2" 90° LT Con Steel Non-Insulated (1)
  • 1/2" Alum Cond Body "X" (1)
  • 1/2" Alum Conduit Body Type LL (1)
  • 1/2" Alum Conduit Body Type LR (1)
  • 1/2" Alum Cord Conn Ranges .375-.500 (1)
  • 1/2" Killark Alm Shallow DV BX Type FS (1)
  • 1/2" Stamped Aluminum Cover (1)
  • 1/2" STR LT Connector Non-Insulated (1)
  • 1-1/2" "C" Type Al Conduit (1)
  • 1-1/2" "LB" Type Al Conduit (1)
  • 1-1/2" "LR" Type Al Conduit (1)
  • 1-1/2" "T" Type Al Conduit B (1)
  • 1-1/4 "LB" Type Al Conduit Bo (1)
  • 1-1/4" "T" Type Al Conduit B (1)
  • 2" "C" Type Al Conduit Body (1)
  • 2" "LL" Type Al Conduit Body (1)
  • 2" "T" Type Al Conduit Body (1)
  • 2" 45° LT Connector Non-Insulated (1)
  • 2" 90° LT Connector Non-Insulated (1)
  • 2" STR LT Connector Non-Insulated (1)
  • 3/4" 45° LT Connector Non-Insulated (1)
  • 3/4" 90° LT Connector Non-Insulated (1)
  • 3/4" Alum Conduit Body "X" (1)
  • 3/4" Alum Cord Conn Ranges .250-.375 (1)
  • 3/4" Alum Cord Conn Ranges .375-.500 (1)
  • 3/4" Alum Cord Conn Ranges .500-.625 (1)
  • 3/4" Dead End Deep Iron (1)
  • 3/4" LB Type Al Haz Loc Fittin (1)
  • 3/4" STR LT Connector Non-Insulated (1)
  • 4" STR LT Connector Non-Insulated (1)
  • Al CVR, DURALOY7 1"-Int Ne GSKT (1)
  • Al CVR, DURALOY7 1/2"-Int Ne GSKT (1)
  • Al CVR, DURALOY7 1-1/4"-Int Ne GSKT (1)
  • Al CVR, DURALOY7 3/4"-Int Ne GSKT (1)
  • Aluminum Conduit Body Type LR (1)
  • Aluminum Cord Conn Blue (1)
  • Cond Body, CORROSAFE7 Al 1" (1)
  • Cond Body, CORROSAFE7 Al 1/2" (1)
  • Cond Body, CORROSAFE7 Al 1-1/4" (1)
  • Cond Body, CORROSAFE7 Al 2" (1)
  • Cond Body, CORROSAFE7 Al 3/4" (1)
  • Conn 90DEG 1/2" .50-.625 Brown (1)
  • Conn STR 1" .500-.625 BRN (1)
  • Conn STR 1" .625-.750 Yellow (1)
  • Conn STR 1" .750-.875 Purple (1)
  • Conn STR 3/4" .750-.875 Purple (1)
  • Connector, Z-Cord, 1/2" NPT (1)
  • Cord Connector (1)
  • CORROSAFE7 1" LB Cond Bdy (1)
  • CORROSAFE7 1" T Cond Bdy (1)
  • CORROSAFE7 1" TB Cond Bdy (1)
  • CORROSAFE7 1/2" LB Cond Bdy (1)
  • CORROSAFE7 1/2" LL Cond Bdy (1)
  • CORROSAFE7 1/2" LR Cond Bdy (1)
  • CORROSAFE7 1-1/4" T Cond Bdy (1)
  • CORROSAFE7 2" LB Cond Bdy (1)
  • CORROSAFE7 2" T Cond Bdy (1)
  • CORROSAFE7 2" X Cond Bdy (1)
  • CORROSAFE7 3/4" LB Cond Bdy (1)
  • CORROSAFE7 3/4" TB Cond Bdy (1)
  • Discontinued - Use Uny75al (1)
  • Duraloy 1 1/2" LB Cond Bdy (1)
  • ECORROSAFE7 3/4" T Cond Bdy (1)
  • Form 7, CNDT Body, 1/2 Type T Al (1)
  • Gasket Neoprene 2" (1)
  • Outlet Body 3/4" Al LB Type (1)
  • Outlet Body, Square 1" Al (1)
  • Plug Al Close Up 1" (1)
  • Plug Al Close Up 1/2" (1)
  • Plug Al Close Up 1-1/4" (1)
  • Plug Al Close Up 3/4" (1)
  • STL CVR, DURALOY7 1"-Int Ne GSKT (1)
  • STL CVR, DURALOY7 1/2"-Int Ne GSKT (1)
  • STL CVR, DURALOY7 1-1/4"-Int Ne GSKT (1)
  • STL CVR, DURALOY7 2"-Int Ne GSKT (1)
  • STL CVR, DURALOY7 3/4"-Int Ne GSKT (1)
  • Weather Head Thread 1 1/2 Al (1)
  • Weather Head Thread 2" Al (1)
  • Weatherproof Conduit Hub 1 1/2 (1)
  • Weatherproof Conduit Hub 2" (1)
  • Show More...

• Brand

  

  • Hubbell--Killark (2)
  • KILLARK (91)
  • Show More...

• Color

  

  • Black (1)
  • Gray (40)
  • Gray;Grey (8)
  • Silver (17)
  • Show More...

• Material

  

  • Aluminum, Copper Free (less than 4/10 of 1%) (1)
  • Iron;Malleable (1)
  • Natural Copper Free Aluminum (Body);Neoprene (Grommet);Nylon (Retention Ring) (1)
  • Steel (7)
  • Show More...

• Finish

  

  • Electrostatically applied powder coating (8)
  • Powder Epoxy Paint (26)
  • Untreated (22)
  • Zinc Plated (7)
  • Show More...

• Size

  

  • 1 in x 1 in x 2 in (1)
  • 1.13 in x 0.55 in x 1.1 in (2)
  • 1.29 in x 0.55 in x 1.1 in (3)
  • 1.4 in x 0.55 in x 1.5 in (1)
  • 1.56 in x 0.5 in x 2.3 in (2)
  • 1/2 in (1)
  • 6.25 in x 6 in x 4.25 in (1)
  • Show More...

• Length

  

  • 1 (2)
  • 1.13 in (1)
  • 10.2 (1)
  • 10.375 (1)
  • 10.625 (1)
  • 11.875 (2)
  • 1-15/16 (1)
  • 12 (1)
  • 1-3/16 (1)
  • 1-3/4 (1)
  • 1-3/8 (1)
  • 2.312 (1)
  • 2-3/16 (1)
  • 2-3/8 (1)
  • 2-7/16 (1)
  • 3 (2)
  • 3-15/16 (1)
  • 4-5/8 (2)
  • 5 (4)
  • 5.56 (1)
  • 5.75 (1)
  • 5-3/8 (1)
  • 6 (5)
  • 6.25 (1)
  • 6.5 (1)
  • 6.88 (1)
  • 7 (7)
  • 7.75 (1)
  • 7-1/2 (1)
  • 7-1/8 (2)
  • 8 (6)
  • 9.625 (1)
  • 9-1/8 (1)
  • 9-3/16 (1)
  • Show More...

• Hub Size

  

  • 1" (9)
  • 1/2" (11)
  • 1-1/2" (2)
  • 1-1/4" (7)
  • 2" (8)
  • 3/4" (10)
  • Show More...

• Special Features

  

  • Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (9)
  • Copper-free aluminum (less than 4/10 of 1%). Natural finish. 300 Series stainless steel screws. (1)
  • Corrosion Resists;Neoprene Grommet Seals Out Oil and Moisture;Nylon Retention Ring Ensures Superior Holding (1)
  • For use with aluminum or steel conduit. Insulators included. Easy installation and assembly. Vertical mounting. (1)
  • Galvanized steel. 316 stainless steel screws. Natural finish. (5)
  • GE conduit outlet boxes have: GEC Series has water shedding cover - suitable for wet locations when mounted in upright position; external cover threads on body protecting conductors from damage during pulling; no pinching of conductors during cover instal (1)
  • Intermateability UL Listed and CSA Certified interchangeability with competitive products. Suitable for wet locations when used with gaskets. Innovative spring clip design for installation ease and repeat usage. Smooth integral wire bushings protects cabl (23)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (8)
  • Open cell neoprene. (1)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 12 cu. in. (2)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 28.8 cu. in. (1)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 32 cu. in. (1)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 36 cu. in. (2)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 4 cu. in. (2)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 7 cu. in. (1)
  • Tapered threaded hubs (NPT). Raintight when used with gasketed covers. Interchangeable with competitive products. Volume is 70 cu. in. (1)
  • Tapered threads (NPT with integral bushings). Internal grounding screw. Optional mounting feet available. Single gang style. Suitable for use in wet locations when used with gasket covers. Cast iron is suitable for concrete use. For use with FS-style cove (1)
  • Tapered threads (NPT with integral bushings). Internal grounding screw. Optional mounting feet available. Single gang style. Suitable for use in wet locations when used with gasket covers. For use with FS-style covers (see pages F40-F42). (1)
  • Threaded for rigid conduit or IMC. Tapered threads (NPT). Strong and durable construction. (1)
  • Threaded hubs (NPT). (4)
  • Show More...

• Width

  

  • 0.625 (1)
  • 1-1/8 (1)
  • 1-3/8 (2)
  • 1-5/8 (1)
  • 1-7/16 (1)
  • 1-7/8 (1)
  • 1-9/16 (1)
  • 2 (14)
  • 2-3/16 (1)
  • 2-3/8 (1)
  • 2-5/8 (2)
  • 2-7/32 (1)
  • 2-7/8 (1)
  • 2-9/16 (1)
  • 3 (7)
  • 3.5 (1)
  • 3.75 (1)
  • 3-1/2 (1)
  • 4 (6)
  • 5 (4)
  • 5.75 (1)
  • 6 (3)
  • 7.375 (2)
  • 7.5 (1)
  • Show More...

• Height

  

  • 0.312 (1)
  • 1 (5)
  • 1-3/8 (2)
  • 1-5/8 (1)
  • 2 (11)
  • 2-5/8 (1)
  • 3 (10)
  • 3.5 (1)
  • 3.75 (1)
  • 3/8 (1)
  • 3-3/16 (1)
  • 4 (4)
  • 4.125 (1)
  • 4.75 (2)
  • 5 (1)
  • 5.375 (1)
  • 5.5 (2)
  • 5.63 (1)
  • Show More...

• Application

  

  • Accommodates wiring devices and provides opening to splice, tap, or pull conductors. Provide access to conductors for maintenance and future system changes. (2)
  • Conduit boxes installed in conduit systems within hazardous areas to: protect conductors in threaded rigid conduit, act as pull and splice boxes, interconnect lengths of conduit, change conduit direction, and provide access to conductors for maintenance and future system changes. (1)
  • For overhead service entrance. For use with threaded rigid conduit. (1)
  • For use with Duraloy 7 Series fittings. (6)
  • For use with O Series fittings. (1)
  • Hazardous Location;Use to secure and seal cords or cables entering enclosures or race-ways (1)
  • Permits removal of equipment without turning or removal of conduit. (1)
  • To close up a taped hole or hub. (4)
  • To provide access to conductors for pulling, splicing, and maintenance. Threaded for rigid conduit and IMC. (33)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electric Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing require (6)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electrical Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing requi (2)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (8)
  • Show More...

• Category Description

  

  • CORD CONNECTORS & CORD GRIPS (10)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (3)
  • FORM 5 CONDULETS, COVERS, & GASKETS (32)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (33)
  • FS BOXES AND COVERS (1)
  • HAZARDOUS LOCATION FITTINGS (2)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (2)
  • Industrial cord connectors (2)
  • RIGID COUPLINGS (1)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • Show More...

• Type

  

  • 45 Degree Liquidtight Non-Insulated Connector (1)
  • 90 Degree Liquidtight Non-Insulated Connector (4)
  • 90º Cord Connector (2)
  • Aluminum conduit body (8)
  • Aluminum stamped conduit body cover (1)
  • Conduit Body (25)
  • Conduit Body Cover With Gasket (5)
  • DEVICE BOX (2)
  • Gasket (1)
  • Male to Female Union (1)
  • Outlet Body With Cover (1)
  • Recessed Plug (4)
  • SERVICE ENTRANCE (1)
  • Straight Cord Connector (8)
  • Straight Liquidtight Non-Insulated Connector (3)
  • Show More...